Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Brought to you by
Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Welcome to the largest and oldest Pinball Parts Wanted page on the
Internet. All entries are sorted in order by date of post, with most recent
listed first.
If you need hard-to-find parts fill out
this form and your entry will be added to this page. This is completely FREE!
1932 Gottlieb Whizz-Bang - 1 Cent Coin Slide wanted in good working condition.
1956 Bally Skill Roll Paperwork. FLYER or other original paperwork, Operating instructions/signs/labels.
WANTED to BUY - Any quantity of pinball advertising/promo paper. Flyers, posters, even old letters from manufacturers and distributors. NOT interested in manuals/schematics or parts catalogs.
Also, looking for a copy of the books:
How to Play and Enjoy Pinball - by Charing
Pinball Machines: How They Work and Troubleshooting, by Snicer
**Any Other Obscure Pinball Books**
Contact:
Mike Minchew
Plano, TX
Posted: 24 July 2008
Looking for the following playfields
1965 Williams- Teachers Pet
1972 Williams- Stardust
1971 Gottlieb- Sheriff
1970 Gottlieb- Aquarius
1973 Bally Hi-Lo Ace
Looking For the following Backglasses
1970 Williams- Aces & Kings
1973 Williams-Darling
1972 Williams- Stardust
1976 Stern or Chicago Coin- Stampede
1976 Bally Hokus Pokus
1965 Bally- Fun Cruise
1966 Bally- Campus Queen
1968 Williams- Cue- T
1971 Gottlieb- 4 Square
1973 Bally - Hi-Lo Ace
1974 Williams- Skylab
Lokking For The Following Cabinets
1970 Gottlieb- Aquarius
1971 Gottlieb- 4 Square
1965 Williams- Pot of Gold
1973 Bally- Hi-Lo Ace
1972 Williams- Stardust
1965 Williams- Teachers Pet
I'm looking for a complete head with or without backglass for a 1976 Gottlieb Surfer
I'm Looking for a complete head for a Bally Eight Ball.
Contact:
Steve
Streator, Illinois 61364
Posted: 24 July 2008
1980 Bally Space Invaders playfield. 8+ or better. Also interested in one to be parted out.
Contact:
Guy Terpening
voice: 847.960.7360
1200 Blue Ridge Parkway
Algonquin, IL USA.
Posted: 23 July 2008
1964 Williams Soccer, Playfield and or Backglass.
Just 21 backglass.
Call Mark at 253-255-1817
Contact:
Mark Groening
voice: 253-255-1817
8033 Jim CT SE
Olympia, WA 98503
Posted: 22 July 2008
Gottlieb Flying Circus Plastics. Wanted to buy Gottliebs Flying Circus centre plastic with 100 point arrow. If anyone can help please email me.
Contact:
Troy Meredith
Orange Promise Road
Walla Walla, NSW Australia
Posted: 22 July 2008
Looking for a 6-1/2" bowling pin for '58 Bally Super Bowler (same game as the All Star Bowler and the All-Star Deluxe Bowler). This pin is not numbered and is made out of a more pliable/rubbery material than the traditional plastic United bowling pins from the same era.
Contact:
Phil Sexton
Colorado Springs, CO
Posted: 22 July 2008
Wanted: Good sound and/or lamp driver board/s for 1978 Bally Playboy. Must be working 100%.
Contact:
Ed Darby
Louisiana USA
Posted: 22 July 2008
White Water take off parts.
Whirl pool ramp chipped upper and area under the playfield $25
Ramp that goes next to the three red targets repair hard to see once installed $20
Dome for topper, cracked around the edges not bad $20
Lot of stuff all used includes : yellow w logo flippers, links and stops for all three flippers (working fine when rebuilt) 4 blue targes, two flat (not 3d)green targets (used for locks) one orange target for extra ball shot. targes are scuffed but useable. left over overlays from Jeff (not a full set $40
add shipping to costs usps from 28012
Contact:
Robert
Cherryville, NC 28021
Posted: 22 July 2008
Backglass for 1967 Gottlieb Diamond Jack.
Contact:
Billy Bousman
Goodview, VA 24095
Posted: 22 July 2008
1972 Bally Fireball! complete head needed. Backglass not needed. I have a nice Fireball! body with no head. Help me put it back together.
Contact:
Michael Hanley
Posted: 21 July 2008
1994 Gottlieb Shaq attaq playfield, I'm looking for a nice Shaq playfield, populated or not.
Contact:
Homer Stevens
voice: 989-689-5159
MI. 48628
Posted: 21 July 2008
Trying to find a very good to mint condition Stern 1977 Stingray Backglass. If you have one for sale please let me know.
Contact:
David
Victoria Australia
Posted: 21 July 2008
Late 1960s to early 1970s Bally 4pl head wanted. No backglass needed. Must be complete.
Contact:
Michael Hanley
Posted: 21 July 2008
Williams 'The Getaway - High Speed II' - The sign the goes over one of the ramps that has 'Supercharger Ramp' on it and two lights attached to it. On the sign itself has part number 1674-23 on it. I only need the piece that attaches the sign to the ramp itself but will purchase the entire sign if need be.
Contact:
Vince
Posted: 21 July 2008
Looking for a double coin-entry housing of a WPC-game Coindoor Bally/Williams in good condition.
Contact:
Loew Michael
Aumuehlstrasse 6
Traun, Oberösterreich A-4050
Posted: 20 July 2008
Wanted - Tropic Isle (1962 Gottlieb)- backglass or reproduction translite/ paper print out. Please call or email.
Contact:
Jonathan Strong
voice: 248-932-1302
Troy, Michigan 48085
Posted: 19 July 2008
Bad Cats parts wanted! Looking for the Ball shooter Plastic with the black cat and the ball of yarn. Also looking for drop target decals and either of the two ramps.
Contact:
Bret
Posted: 18 July 2008
1989 Williams Bad Cats. Need 4 plastics for this game. Right slingshot plastic P/N 575-17-sp. Small plastic ajacent to fishbowl ramp gate P/N 575-3A-sp. Blue shooting lane plastic with black cat on it P/N 575-9-sp
Yellow plastic top of 3 bank drop targets on right side of PF, this has a bird on it.
Or a complete set of plastics in good condition.
Contact:
Paul
Sydney Australia
Posted: 17 July 2008
Backglass wanted for 1960 Williams Jungle pinball. Want with little or no flaking.
Contact:
Gene
Marion, Illinois 62959
Posted: 17 July 2008
Trying to get a hold of a 1977 Bally Lostworld Backglass please. Would like it to be in very good condition to mint. Location for freight will be Australia. Please let me know how much you are asking for this plus Shipping to Australia.
Contact:
David Wilson
Victoria Australia
Posted: 17 July 2008
I am looking for a B/G for a 1954 United Bingo machine. The game title is Havana. Would like it to be @ least a grade of 9. Only need the B/G but will take the whole game in need be. Must be located in the St. Louis area.
Contact:
Herb
voice: 636 789 4310
158 Pioneer Trail
Hillsboro, MO Jefferson
Posted: 17 July 2008
Looking for a Popeye skill shot assembly. Motor and all. I got a game missing one. Also looking for a apron for a Gorgar. Or known decal set for apron?
Contact:
Ronald
Maumee, Ohio
Posted: 17 July 2008
Looking for Gottleib System 1 wiring harness complete if possible, or I will accept all board connectors with wires cut about a couple of inches in length.
Contact:
Scott Cook
voice: 630-742-2472
IL 60177
Posted: 17 July 2008
Looking for like-new Bally scorecard holder (bottom arch) P-5871-38 (Use for Four Million B.C., Skyrocket, Expressway, Sea Ray, Mariner, El Toro, Little Joe, Space Time, Monte Carlo, Odds & Evens, Time Zone, Nip-It, Circus, Big Show and Champ). No rast, no scratch, no sticker please. US$30 plus S/H cost to Japan by U.S.P.S. (approximately US$35). Please send some pictures via email.
Contact:
Hideaki Yamamoto
Japan
Posted: 17 July 2008
Wanted: Nice backglass for 1979 Balley Hotdoggin'
Contact:
Robert
Meridian, MS 39301
Posted: 17 July 2008
Looking for some 1960's relays for Bally EMs.
HOLD relay
ANTI CHEAT relay
others may work
Contact:
Chuck Robichaud
voice: 401-569-2010
14 Teakwood Dr
Johnston, RI 02919
Posted: 17 July 2008
Wanted--bat handle assembly for Bally 1948 Heavy Hitter. This is the small game. The handle assembly mounts on the front of the cabinet. Does anyone have a Chicago Coin Playball pinball baseball 1951? Looking for a head and a silk screened playfield glass. Good photos would also help. Paper work for Midway Deluxe Baseball. Someone must have this game!
Contact:
John D Sulewski
voice: 716 372 7634
321 Fountain St.
Olean, NY 14760
Posted: 16 July 2008
I am looking for the backglass to a 1975 STAR POOL by Williams.
Contact:
Leesa Samuels
voice: 502-472-5304
Lawrenceburg, Kentucky 40342
Posted: 16 July 2008
1979 Bally Harlem Globetrotters bare playfield or playfield overlay, I have the old playfield with all fittings and would like to replace the playfield or fit a new overlay, must be in good condition.
Contact:
Tony Tanti
High Street
Melbourne, Victoria Australia
Posted: 15 July 2008
Wanted: ramps for Data East Monday Night Football. Do not have to be perfect.
Contact:
Edwin K Shenk
voice: 978-692-7909
100 Carlisle Road
Westford, MA 01886
Posted: 15 July 2008
1978 Bally Bobby Orr Power Play individual playfield plastics wanted in excellent condition:
M-1330-142-5, M-1130-142-7, M-1130-142-9
Or willing to buy full set.
Contact:
Steve
Austin, TX USA
Posted: 14 July 2008
Wanted: 1957 Gottlieb Royal Flush cabinet / head with original paint / art and playfield. Please let me know.
Contact:
Mike
Posted: 14 July 2008
After a set of Trident boards cheap ones and if you have any for it. I may be interested and a scan of the plastics as mine have worn off the colour.
Contact:
Matthew Freeman
Australia
Posted: 14 July 2008
1993 Data East Tales from the Crypt Complete Plastic set. I prefer New or Excellent used.
Contact:
Bob Cunningham
voice: 772-978-1332, fax: 772-978-1334
699 8th Court
Vero Beach, FL 32962
Posted: 13 July 2008
1999 Sega/Stern South Park Pinball Cartman and Sign Toppers.
Contact:
Jason Connell
voice: (412) 854-1587
3466 Thornwood Drive
Bethel Park, PA 15102
Posted: 13 July 2008
Gottlieb Ice Review 1965 - Have a beautiful pin without the playfield plastics with the '1' '3' and the small one next to the left flipper. Can somebody make high resolution scans so I can make some reproductions?
Contact:
Tony Mather
Posted: 13 July 2008
Looking for Bow Tie shaped plastic for Gotlieb 1973 Jumping Jack or Jack In The Box.
Looking for nice Backglass for Williams 1970 Solids N Stripes.
Contact:
Mark Banning
voice: 540-368-2672
3 Rosewood St
Falmouth, VA 22405 USA
Posted: 13 July 2008
Wanted: Transformer for Bally Strange Science.
Contact:
Tim Arnold
voice: 509-499-6891
5626 N Belt
Spokane, WA 99205
Posted: 13 July 2008
I am looking for a Johnny Mnemonic Y Screw and Y Nut for the hand motor assembly.
Contact:
Sean Labrecque
voice: 702-285-5316
6412 Sierra Daiblo Ave
Las Vegas, NV 89130
Posted: 12 July 2008
Looking for any and all parts for 1977 Williams Big Deal machine.
Contact:
Khvfgt
Michigan
Posted: 12 July 2008
We own a 1956 Williams crane game. The scoop won't go up because the chain slips on the rubber 'gear.' It appears that a few teeth are missing from the gear. If anyone has a replacement part or some ideas as to how I can fix the broken part, it would be greatly appreciated.
Contact:
Steve Uhr
voice: 52-239-0346
4524 Balfanz Rd
Edina, MN 55435
Posted: 12 July 2008
Wanted: 4 decent wood legs for an older pinball machine.
Contact:
John Dutra
Posted: 12 July 2008
Looking for A-15680 PCB BOARD. Board works on the following
pinball, Cirqus Voltaire, Whitewater, Doctor Who.
Contact:
Gabe
voice: 15617675127
1500 Spring Landings
Deerfield, FL 33445
Posted: 11 July 2008
Wanted: 1954 United 11th Frame shuffle alley schematic and pins.
Contact:
Butch Horwath
2107 Kenmore Ave
Bethlehem, PA 18018
Posted: 11 July 2008
Wanted: Bally Elektra plastic set in good condition. Some small chips are ok. Also Elektra apron in good condition. Also targets in good condition. Please advise condition and price with shipping to zip code 01756.
Contact:
Scott
01756 USA
Posted: 11 July 2008
Looking for a Ding Dong backglass as well as a rubber set for an Allied Leasure Dyn'O'Mite, Any help appreciated.
Contact:
Ray Rennock
voice: 816 674 6714
Overland Park, Kansas
Posted: 11 July 2008
1978 Williams Pinball Pot O Gold Paperwork: Looking for any and all Paperwork for WMS 1978 Pot 'O' Gold Pinball machine. I am looking for:
Information Card for Apron
Rule Set Card for Apron
All other Cards for the Apron
Pot O Gold Manual
Pot o Gold Schematics
Any other paperwork for this machine that I have overlooked. My machine is in really nice shape and I just want to catch everything on it up to date.
Contact:
Steve Campbell
Posted: 10 July 2008
Fire! Pinball Machine: Need to find any of the houses and the ramp.
Contact:
Tami
Posted: 10 July 2008
1956 United 'Pool Alley' bowler backglass.
1961 Big Casino Backglass
1970 Midway Sea Devil EM arcade Marquee.
Please email with pics and price.
Contact:
Mike Mills
Cox's Creek, KY 40013
Posted: 10 July 2008
Looking for the Earthshaker plastic that goes under the earthquake institute that says Lit Windows=Earthquake Zones To Visit. Needs to be uncracked but slight yellowing is ok.
Contact:
Michael Cox
Posted: 9 July 2008
1956 Big Show Bally bingo, playfield only. Demolition Man, front cabinet decal only.
Contact:
Peter
Victoria Australia
Posted: 8 July 2008
1961 Gottlieb Big Casino backglass. Does not need to be mint.
Also looking for Williams ball shooter assembly for 1973 Gulfstream.
Contact:
Mike Mills
Cox's Creek, KY 40013
Posted: 7 July 2008
MPU board for a Bally Strikes and Spares-prefer used in full working condition. Not looking to buy a new Ultimate board at retail price right now
Backglasses-Quick Draw and Klondike-prefer used with little wear
Contact:
Dana Poore
7930 Zachary Cicle
Lincoln, Nebraska 68507
Posted: 7 July 2008
Need motor/gearbox assembly part number E119-362. This part is for 1969 Bally Bowl-O. Let me know if you have other game specific parts for this one.
Contact:
Gerald
Posted: 7 July 2008
Need working motor/gearbox assembly #E119-362 for 1969 Bally Bowl-O. Also need cam shaft for relay bank that this motor/gearbox assembly drives. I do not have part number, but I can email pictures.
Contact:
Gerald
Posted: 7 July 2008
1965 Williams Lucky Strike - need backglass in VGC
1959 Gottlieb Atlas - need playfield plastics
1960 Gottlieb Melody Lane - need playfield plastics
1957 Gottlieb Straight Flush - looking for metal piece which clips over the two light bulbs located above the roto target
CYG (Cover Your Glass) - any still around that's available?
Contact:
Joseph Fela
voice: 908-755-3852
150 Robert Place
So. Plainfield, New Jersey 07080
Posted: 6 July 2008
1968 Chicago Coin All Stars pitch and bat. Please help. Someone robbed the batting coil plunger from my pitch and bat and I am trying to locate a replacement. The plunger is the large 3/4" one with a copper middle and a steel center. It is (was) 2 1/8" long. Does anyone have one in a scrapped CC machine? The same plunger was used in several games and also used to reset switches in the heads of some machines.
Contact:
Dan Lejnieks
Posted: 6 July 2008
Eye of the Tiger - Gottlieb. I am looking for the playfield plastics. Please let me know what you have, a picture would be helpful. Doesn't have to be perfect or complete.
Sinbad - Gottlieb. I am looking for the playfield plastics. Please let me know what you have, a picture would be helpful. Doesn't have to be perfect or complete.
Contact:
Andy Patko
Birmingham, Al 35242
Posted: 6 July 2008
Looking for US Marshal gun parts.
Contact:
David Arnold
3535 North 97th St
Milwaukee, WI 53222/usa
Posted: 6 July 2008
Looking for a playfield for a Bally Bow and Arrow. Does not have to be perfect and can be populated or unpopulated.
Contact:
Dave Chamberlin
voice: (317) 292-1909
Indianapolis, In
Posted: 6 July 2008
Wanted: Gottlieb Super Soccer pinball slingshot plastics, I dont care if its NOS or repro or even if paint is missing. Will also accept a left slingshot plastic from a compatible Gottlieb pinball machine.
Contact:
Kelley Smith
308 Keyes Drive
Ruidoso, New Mexico 88345
Posted: 6 July 2008
1965 Chicago Coin Big League Pitch and Bat parts needed. I am looking for a working score motor Multi Products SPEC # 897, 30V 16RPM and the animation motor unk SPEC #. I can pay up to $45.00 for each plus $15 postage/handling.
Contact:
Tom Garcia
Whittier, CA
Posted: 5 July 2008
1972 Gottlieb Flying Carpet Playfield Needed. I am in need of a Flying Carpet playfield, must be atleast a 7 or better. Playfield must be complete, although you may keep the playfield plastics as I don't need those. My playfield is about a 3 or 4, anything would be an upgrade.
Contact:
Phil Harris
voice: 971-563-2625
Vancouver, WA
Posted: 5 July 2008
1995 Williams Jackbot - need playfield plastics, particularly the right pinfield with the reclining girl bot.
Contact:
Don Yates
voice: 208-891-3666
2701 W. Divide Creek
Meridian, ID 83646
Posted: 5 July 2008
2 plastics for Gottlieb Pro-football, top middle and the right side. Would also appreciate the flipper scans, otherwise I will make my own.
Contact:
Shawn Yuzik
Posted: 5 July 2008
Looking for a set of plastics for Gottlieb Bowling Queen
Contact:
Cliff
Posted: 5 July 2008
Need speaker panel for 1996 thru 1999 Bally pinball. Email me for phone number. Any Bally speaker panel will do.
Contact:
Herman Rea
voice: email for number
Midwest
Posted: 5 July 2008
1947 Genco State Fair - Looking for ball plunger and resting block, lockdown bar (wooden). NOS or working originals.
Contact:
Robert
Mississippi 39301
Posted: 4 July 2008
1978 Williams wide body 'Contact' pinball game. I am looking for the right side playfeld plastics, or I will buy the entire set.
Contact:
Henry Hensel
voice: 850-449-5867
Posted: 4 July 2008
1994 Bally World Cup Soccer speaker panel, must be excellent.
Contact:
Stephen
NJ
Posted: 4 July 2008
Looking for a center Ramp for a Williams Police Force. Prefer NOS/Repro, but willing to consider anything that could be repaired.
Contact:
Phil Sexton
Colorado Springs, CO
Posted: 4 July 2008
Need Midway Flash Baseball pitch and bat game 8 track player, score reels, curveball unit.
Contact:
James Crawford
voice: 856 4640040, fax: 856 4640040
1 Lavenham CT.
Mantua, NJ United States
Posted: 4 July 2008
Lockdown bar for a 1978 Stern Wild Fyre.
Contact:
Paul A. Schultz
voice: 414-545-1266 after 5 pm
2231 S.71 Street
West Allis, WI 53219
Posted: 3 July 2008
Looking for the police badge speaker cover located top center of back box on a 1989 Williams Police Force pinball game. Please e-mail me if you have one for reasonable price.
Contact:
T. Houston
Oak Ridge, Missouri 63769
Posted: 3 July 2008
Stern QuickSilver backglass wanted in nice condition.
Contact:
Tom Rader
Bakersfield, CA 93306
Posted: 3 July 2008
WTB: Bram Stoker's Dracula Prototype slingshot plastics.
Contact:
M. Osten
Posted: 3 July 2008
Wanted- Working 'Sounds Plus' board with correct ROMs for early-production Bally Flash Gordon. Will also take a Squalk and Talk with correct ROMs if you can tell me how to retrofit. I have the original -56 Sounds Plus board, fixed it twice, tired of trying to keep it running.
Contact:
Keith
voice: (817)914-3069
Bedford, TX
Posted: 3 July 2008
Looking for a backglass for a 1979 Williams Laser Ball.
Contact:
Bob
voice: 561 753 1626
Royal Palm Beach, FL 33411
Posted: 3 July 2008
1980 Bally Embryon Playfield -- NOS or Excellent Condition w/ no wear through in artwork. Will pay top dollar.
Contact:
Steve
voice: 248-760-7381
Southeast, Michigan
Posted: 2 July 2008
Williams Funhouse--Need:
The Hidden Hallway sign, metal hardware and the blue rubber pad. The other thing I nead is, just to the right of Ruby's head, I need the light that hangs over the trap door. The metal shield, post, light and the wires that go to it. The machine that I bought had these things missing. I also need to be told where to hook up the light under the playfield or have a pic of where I need to install the wire under the playfield.
Contact:
Floyd Dalton
LA Verne, CA
Posted: 2 July 2008
Williams Travel Time Backglass
Gottlieb Diamond Jack Backglass in near/mint shape
King of Diamonds or Diamond Jack cabinet and head with original paint
1992 Data East button assembly for game adjustments (inside coin door to left)
Gtb.Subway playfield in nice shape, doors for Subway animation
Old pinball locks working or not working (keys would be nice)
Will buy or trade if I can help you out with something your looking for
Contact:
Al Johnson
WI
Posted: 2 July 2008
1979 Williams Laser Ball backglass
Contact:
Bob
voice: 561 512 3282
Royal Palm Beach, FL 33411
Posted: 1 July 2008
Champion Pub: Looking for a Bally Serial 24 Drive PC Assembly. Part no. A-21967-2. This is a electronic board under the playfield for a Champion Pub pinball.
Contact:
Sherrie
Posted: 1 July 2008
Looking for a Zaccaria 1B1144 sound board for a Star God.
Contact:
David Gersic
voice: 815-758-4425
927 E. Garden St.
Dekalb, IL 60115
Posted: 1 July 2008
1976 Bally Fireball Professional Home Model Pinball Game Model 606-1000, Wanted: The CPU/Display Board part #P.C.0606-00905 D, made by Midway Mfg Co. or the CPU chip #3850, PSU chip MK12014N, PSU chip MK12013N
Contact:
Ken Scholl
1485 Lindsay Lane
Florissant, Missouri USA
Posted: 30 June 2008
1978 Bally Playboy pop bumper caps, not burnt/melted, other misc. parts.
Contact:
Ed Darby
Louisiana
Posted: 30 June 2008
Looking for a working Stern MPU-200.
Contact:
James
Texas
Posted: 30 June 2008
Looking to buy a set of plastics for a Gottlieb Silver pinball. Please send a picture and price along with shipping when replying to this ad.
Contact:
Dennis
Quincy, IL 62301
Posted: 30 June 2008
1976 Gottlieb Surf Champ/Surfer - looking for a nice set of playfield plastics. Especially in need of the bottom two plastics by the flippers but am willing to purchase entire set. I have purchased a set of the reproduced plastics, but they don't match up with the originals very well, colors are not as bright. I would really prefer the real thing if possible. Please give me a call or send me an email if you can help.
Contact:
Tom Hurley
voice: 313-820-7045
Posted: 29 June 2008
1987 Williams F-14 Tomcat
3 beacon flashers--the silver metal part that spins for the light effect
White plastic beacon cover--must be in top notch condition with no yellowing...I have one, but would like to get a better one
Top left LED screen--a 7 digit alphanumeric board (the other 3 boards work fine, I just need that one)
Decal sheet to replace all play field decals
Contact:
Luke
Indianapolis
Posted: 29 June 2008
Cover Girl backglass wanted - good condition (not faded)
Contact:
Gilbert Michel
Posted: 29 June 2008
Looking for a backglass for Gottlieb El Dorado (NOS, Mint or Shay repro)
Contact:
Cliff
Allentown, PA
Posted: 29 June 2008
Wanted: 16 Bally score reels. I'd like NOS or excellant condition reels. Looking for nice clean & bright replacement reels for an 'Old Chicago'
Contact:
Tim Ewing
voice: 3372478056 days
Lafayette, Louisiana 70506
Posted: 29 June 2008
Wanted: 2 springs as the ones on the 'exploding springs bumpers' fitted on the ESCO 'Magic' pinball (1948).
Contact:
Gilbert Michel
Posted: 29 June 2008
Looking for a Jackbot mini playfield in 'new' condition or info on how or where to obtain one or a quality repro. If any good Jackbot parts are collecting dust please let me know.
Contact:
Jimmy P
voice: 586 405 4446
Posted: 29 June 2008
1987 Bally Heavy Metal Meltdown ramp: Must have no cracks in the ramp.
Contact:
Sal
North 13th Street
Easton, PA 18042
Posted: 28 June 2008
1987 Data East Laser War. I need an entire spinner assembly, the part that mounts on top of the play field, there are two. I need the one on the right. Might be similar to what's used on other DE games from that era.
Contact:
Steve
Jacksonville, FL
Posted: 28 June 2008
Bally Xenon. I'm looking for the light stick that runs behind and parallel to, the clear plastic tube. Anyone have one for sale, or know where I can get one.
Contact:
Steve
Jacksonville, FL
Posted: 28 June 2008
Exhibit pinball front door from any game with coin mech gear if possible. Interested in any condition.
Contact:
Tony Mather
Posted: 28 June 2008
I am looking for a reasonably priced Paragon backglass or reproduction translite. Also, Like the artwork on Lost World backglass as well.
Contact:
Len Defoggia
Honey Brook, PA 19344
Posted: 28 June 2008
Looking for the Who Dunnit slot reel window. Not the actual slot machine, but the window with decal in nice CLEAN shape. I have one now that's been super glued near the windows, and so it looks awful. I tried taking out the decal, only to not be able to remove the gunk what so ever. Need a new one.
Contact:
Steve Mcdevitt
Posted: 28 June 2008
Wanted: Ball trough opto boards for a Dugeons and Dragons Bally pinball machine or another compatable game.
Contact:
Randy Hubbard
voice: 6065465550
Posted: 28 June 2008
1979 Bally Paragon: Working on a project game and playfield is missing one of the larger opaque white circle inserts midfield that spells PARAGON (the actual insert I need is the "G" if anyone has a trashed playfield that would be willing to part with this insert please contact me.
Contact:
Alan Gutberlet
Posted: 27 June 2008
Gottlieb Volcano backglass wanted in good condition.
Contact:
Bryon Triplett
Des Moines, IA
Posted: 27 June 2008
Looking for a Gold Star and a Spot A Card backglass, Gottlieb 8/1954 & 8/1960 - Good original or Repro OK.
Contact:
Jim Southwell
voice: 864 593 8321
Mauldin, SC USA
Posted: 27 June 2008
Looking for a populated playfeild for a 1976 Gottlieb Solar City.
Contact:
Tim
Triangle, Woodbridge, Fredericksburg, Alexandria, VA.
Posted: 27 June 2008
Looking for a single sided red opaque lane guide with the Bally logo on top. It is for a Strikes & Spares, but guess that other machines of this era had similar parts.
Contact:
Christopher Quick
Atlanta, GA
Posted: 27 June 2008
Looking for 2 playfields. One is for a Supersonic and the other is a Time Warp. Let me know the price and the condition.
Contact:
Steve Orringer
voice: (919)965-8370
487 Herring Road
Princeton, NC 27569
Posted: 26 June 2008
Looking for an original sound PROM U4 marked 664* for Pink Panther. Trade or buying.
Contact:
Fred Vilbert
France
Posted: 26 June 2008
Parts for Williams Roadshow needed
Translite in good condition or NOS
Ted head good condition, no damage
Have PayPal facility. Please email with details of parts
Contact:
Julie
Bideford, Devon UK
Posted: 26 June 2008
I need a backglass for a 1967 Gottlieb Hi Score.
Contact:
Nick
Posted: 26 June 2008
I need the 'G' insert for a Bally Paragon playing field. The game name PARAGON is spelled out in the lower 1/3 of the playing field, this is done with slightly larger than quarter sized inserts. In need of a G.
Contact:
Kimnberly Barajas
1013 NW 18th Street
Cape Coral, Florida 33993
Posted: 26 June 2008
1973 Williams Gulfstream Parts WANTED. Looking for Gulfstream backglass, 3 chime box for a 70's era williams game. Contact me
Contact:
Ron Silvey
voice: 559-442-6040
631 N. Broadway St.
Fresno, CA 93728
Posted: 25 June 2008
Ice Review playfield plastics - Gottlieb 1965
Looking for a playfield plastic set (or parts set) for Gottlieb Ice Review. Any help greatly appreciated.
Contact:
Tony Mather
Posted: 25 June 2008
In need of a playfeild for a 1989 Bally Mousin Around in good condition with next to no wear. With or without plastics or coils but complete would be good. I wish to replce my worn playfeild.
Contact:
Paul
Sydney Australia
Posted: 25 June 2008
Looking for Diner cup. Would like NOS but good condition used is ok.
Contact:
Tom
Posted: 25 June 2008
Looking for the plastics assembly above the mosh pit in Monster Bash, A-22468.
Contact:
Rich
Posted: 25 June 2008
Need a Williams Smart Set backglass in good to excellent condition.
Contact:
Dave
Posted: 25 June 2008
Jokerz! playfield wanted. Price, condition and location please.
Contact:
Scott Gerdeman
Alto, MI
Posted: 24 June 2008
Looking for 1963 Gottlieb Sweet Hearts backglass and plastics.
Contact:
Nick
Clarkston, MI
Posted: 23 June 2008
Looking for dome beacon light for 1986 Williams High Speed. I already have the motor, dome, bulbs and really just need the reflector piece that completes the light. However, I will happily purchase the entire fixture from someone that doesn't want to break up the assembly. I will gladly pay for parts, shipping, etc.
Contact:
Randy Fickett
voice: 4844104696
6445 Loudon Ave.
Elkridge, MD 21075
Posted: 23 June 2008
NOS or Mint Stern Magic Playfield
Contact:
Mark Salas
voice: 4402212925
Westlake, Ohio USA
Posted: 23 June 2008
Wanted:
Plastic assembly A-22468 from Williams Monster Bash (directly above mosh pit)
Whirlwind slingshot plastics
Contact:
Rich
Posted: 23 June 2008
1958 Bally Big Inning Baseball Backglass wanted. Looking for a backglass in very good to excellent shape.
Contact:
Mike
Maryland
Posted: 22 June 2008
1963 Williams Oh Boy - after a copy of the instruction card.
Contact:
Tony Mather
Posted: 22 June 2008
I'm looking for some Williams High Speed Plastics. I'm in need of plastics # 541-15, 541-55. I would like NOS ones, but nice used ones would be fine and would be willing to buy other for this game. A complete set of NOS plastic would be great.
Contact:
Robert
Fairfield, Ohio 45014
Posted: 22 June 2008
I'm looking for the following parts for a 1996 Sega Goldeneye:
Slingshot plastics
Helicopter plastic
Tank Plastic
Metal ramps or Habit Trails
Contact:
Rich Marquette
Etters, PA 17319
Posted: 22 June 2008
I am after the rear Scared Stiff translight behind the spider, NOS or A-1 condition.
Contact:
Andrew Thompson
2 Melaleuca Court Rowville
Melbourne Australia, Victoria 3178
Posted: 22 June 2008
Looking for a NOS NBA Fastbreak right ramp assembly.
Contact:
Cliff
1231 Airport Rd, #220
Allentown, PA 18109
Posted: 21 June 2008
Need a Monster Bash translite. It can be NOS or a nice used one.
Contact:
Tony
voice: 1-330-232-1746
Ohio 44647
Posted: 21 June 2008
Wanted: Back glass for 1965 Gottlieb Dodge City.
Contact:
Tim Arnold
5626 N Belt
Spokane, WA 99207
Posted: 21 June 2008
1978 Bally Fireball professional home model pinball machine. Looking for a power supply to this game. I just picked this machine up & it is missing. Any help would be appreciated. I have a parts game without boards too, so if you might need something for yours let me know.
Contact:
Gavin Miller
voice: (312) 699-0968
Schaumburg, IL 60193
Posted: 20 June 2008
1993 Bally Twilight zone translight in excellent condition.
Contact:
Chad
Tacoma, WA
Posted: 20 June 2008
Backglass for 1936 Bally Bumper required and illuminated scoring mechanism to complete my machine.
Contact:
Gavin Tiernan
Posted: 20 June 2008
Bram Stoker's Dracula speaker panel (artwork only)-no damage. Will pay good $$
The Shadow backbox speaker panel (artwork only) in excellent condition, no scratches. Will pay good $$
Corvette backbox speaker panel (artwork only) in excellent condition, no scratches. Will pay good $$.
Please don't hesitate to email me.
Contact:
Damien Cowin
Posted: 20 June 2008
WTB: 1977 Gottlieb Big Hit backglass
Contact:
Njg
Posted: 20 June 2008
I'm looking for a Bobby Orr Power Play CPU board, used is fine as long as it works. Also looking for a Cyclone score board.
Contact:
Ken
voice: 269-0998
Tucson, AZ 85711
Posted: 20 June 2008
1948 Williams Double Header baseball bowler that have 4 tin running men where there would normally be 10 Bowling pins: MEN ARE ATTACHED TO THE RUNNING UNIT AT THE HEAD AND SHOULDERS, and drop down to the playfield, much like the bowling pins drop in a standard bowler, but these guys actually run around the bases when you hit the contact on the playfield and retract up, into the unit, when they score. Each runner is attached to the motorized unit at the TOP, not at the legs as on a typical Williams baseball pitch & bat machine AND they are considerably larger, measuring approx 4" from head to toe. Looking for one baserunner with arm that attaches from the runners head and shoulder to the motorized unit, but will spring for the whole unit if you have it.
Contact:
Michael Brown
Posted: 19 June 2008
1969 Chicago Coin Apollo Moon Shot Rifle electro-mechanical gun game: factory original solid state sound module, working or not. This was mounted in the upper backbox of the cabinet and was attached to a four pin connector and speaker. There was a tone and volume control on the unit. On the schematic is it called "X-10 Space Ship Sound Unit"
Also any other parts for this game or a complete game if within 150 miles of 92025.
Contact:
Will White
voice: 619-829-6930
Escondido, CA 92025
Posted: 19 June 2008
1974 Bally Bali bingo backglass. Looking for a glass in very good or NOS condition. Please email conditions of your glass, pic of both sides if possible, along with asking price. The glass will have to be very safely and carefully packed to avoid shipping damage/breakage to face or corners.
Contact:
Sylvain Gregoire
Ottawa, Ontario Canada
Posted: 19 June 2008
Backglass for 1977 Gottlieb Solar City. Must be in good condition. Any help locationg one of these would be appreciated.
Contact:
Doug Huber
voice: 314-229-9634
1703 Shiloh Ridge Rd.
Chesterfield, Missouri 63005
Posted: 19 June 2008
Looking for some Addams Family decals for the cabinet. Drop me a email if you have any. Especially looking for main cabinet front and side. Please send pics and price to me.
Contact:
Glyn Davies
Posted: 19 June 2008
Looking for the following Backglass
Night Rider Bally 1976 EM
Bounty Hunter Gottlieb 1985 SS
Silverball Mania Bally 1978 SS
Big Ben Williams 1975 EM
Mine are either flaking or cracked, so I am looking for 'in good condition' or better.
Contact:
Mike In Australia
Posted: 19 June 2008
Sega EM Manuals
Looking for the following SEGA EM manuals. Would also be interested in any other paperwork (invoices, service bulletins, flyers, etc.) for the SEGA EM games (1966-1976)
Sega Dodgem Crazy manual
Sega Derby Day manual
Sega Five StarQ manual
Sega Grand National Race manual.
Sega Jumbo manual
Sega Invaders 1970s manual
Sega Pro Bowler manual
Sega Jockey Club manual
Sega Ascot manual
Sega Love Tester 1960s manual
Any other other Sega EM service bulletins, old invoices, etc
Contact:
Derek
Posted: 18 June 2008
Williams Space Odyssey backglass
Bally Zip-A-Doo lower right slingshot plastic. Will take entire set if necessary.
Backdoors for 1970s Williams 4-player games, 25-1/4"W by 27-3/4"H. I need two.
Contact:
Daina Pettit
voice: 801-277-6296
Salt Lake City, Utah 84117
Posted: 18 June 2008
Appron SilverBall Mania good condition
Contact:
Richard Bell
Sterling Heights, MI 48314
Posted: 17 June 2008
Gottlieb 1980 Star Race Wide Body
One of the prettiest backglasses I have ever seen, yes, I need one. Plus, I need any and all paperwork PLUS I need a CPU board and EPROM. Anyone out there help a EM guy finally taking the step into SS machines. I know...System 80, what a way to start.
Contact:
Steve Campbell
Posted: 17 June 2008
I am in need of a Bally Hang Glider backglass. I am also looking for the following machines, Bally Supersonic, Bally Dolly, Bally Centaur, Bally Xenon, Williams Strato Flite.
Contact:
Jim Morini
voice: 360-490-5153
P.o. Box 233
Union, WA 98592
Posted: 17 June 2008
Looking for the bottom arch for a 1971 Bally pinball machine. The machine I have is 1971 Sky Rocket. The bottom arch does not have to be the exact one for the machine, just one that fits.
Contact:
Don Krise
Posted: 17 June 2008
Wanted: 1964 Southland Little Pro- Ball Lift Motor and assembly for Southland Little Pro. Will pay any reasonable price.
Contact:
Alan Fischer
Posted: 17 June 2008
Looking for Firepower II playflield plastics and maybe other parts for this pinball.
Contact:
Gary Madden
2152 Woodhaven Ln
Duluth, MN 55803
Posted: 17 June 2008
1976 Bally Freedom EM backglass. Will pay good.
Contact:
Rob
voice: (408) 204 7803
Mosswood
San Jose, CA 95132
Posted: 16 June 2008
I need two ramps for my 1987 Bally Party Animal machine. I need the ramp that goes up to the top saucer and the little ramp from the top saucer that guides the ball back onto the playfield. Email price and condition. Used is OK.
Contact:
David Bain
Posted: 16 June 2008
Need White Water topper decal/plastic. Any condition.
Contact:
Brian
MI
Posted: 16 June 2008
Wanted: Wooden legs with 4.5 inches between bolt holes (center to center). The length of the legs are about 34-35 inches long.
Contact:
Mike
Maryland
Posted: 16 June 2008
Looking for a backglass for a 1977 Star Explorer home pin - must be perfect.
Contact:
Jon
Posted: 15 June 2008
Looking for a nice original or repro backglass for a Williams 1963 A.L. Twins or Major League. I would prefer A.L. Twins but will settle for either. Also looking for the left side rail for the playfield glass for the same machine.
Contact:
Darryl Anderson
Richfield, MN
Posted: 15 June 2008
Ok, lets try this again since the first time wasn't very clear. I am in need of a topper for Lights...Camera...Action (LCA). If anyone has one to sell please let me know.
Contact:
Mike Nolte
Ontario
Posted: 15 June 2008
1976 Gottlieb Target Alpha Backglass. I'm seeking a nice used or NOS backglass to replace a badly peeling one.
Contact:
Jim Crismale
Oradell, NJ 07649
Posted: 14 June 2008
Looking for nice set of playfield plastics for Gottlieb Raven. I would also consider an NOS set or an incomplete unbroken used set. I have a left slingshot screened plastic that is broken.
Contact:
Richard Strunks
Posted: 14 June 2008
Searching for red corvette slot car from the arcade game Americam Speedway, 1961. Need to complete game. If anyone has this or knows of any leads or knows anyone who can replicate (I have the yellow corvette to take a clone from) Please contact me.
Contact:
Stu
voice: 403-801-5708
Alberta Canada
Posted: 14 June 2008
1993 Williams Judge Dredd Lockdown Bar (Part Number A-16055) - I'm looking for a new or good used widebody lockdown bar for my Judge Dredd machine. The same bar was universal for the various widebody games, so it's not game specific. I would actually prefer a brass finish if available.
Contact:
Nile Roberts
603 Shale Gray Court
Cary, NC 27519
Posted: 13 June 2008
I am looking for a working board for a High Speed pinball system 11 A. The one I have has a short or something in the display output all the alphanumeric segments are always on.
Contact:
Curt Kniss
Mesa, AZ
Posted: 13 June 2008
Looking for a Gottlieb Bowlette repro or good original playfield. I know they repro'd these a few years ago. Does anybody have a repro they aren't going to use or a decent original that they kept after installing a repro?
Contact:
Phil Sexton
Colorado Springs, CO
Posted: 13 June 2008
1995-2000 Sega board parts needed. Looking for set of boards for Jurassic Park Lost World. Game was stripped and would like to restore it. Also any playfield parts from a donor would help. Needing upper left moving 'trap ball target' or entire assembly. If you have info on where to look, please call anytime.
Contact:
Jeff
voice: 863-533-1810
Posted: 12 June 2008
Gottlieb Cover Girl and Olympics backglasses wanted. Please let me know condtion and asking price.
Contact:
Tony Mather
Posted: 12 June 2008
I'm looking for a complete topper for this machine in good condition.
Contact:
Mike
Lindsay, Ontario Canada
Posted: 11 June 2008
Looking for a upper backglass for a 1963 United Fury ball bowler.
Contact:
Al
Cleveland, OH
Posted: 11 June 2008
NOS or near mint Instruction card for Gottlieb High Hand and Fast Draw.
Contact:
Tony Mather
Posted: 11 June 2008
1975 Gottlieb, Abra Ca Dabra, backglass and playfield plastics
Playfield plastics for Gottlieb games:
1976 Target Alpha
1976 Royal Flush/Card Whiz
1973 Hot Shot/Big Shot/Pro Pool
1973 Jack in the Box/Jumping Jack, especially the center C-14477
1966 Masquerade
1978 Bally Playboy, need bumper caps
Contact:
Gary C
Posted: 10 June 2008
1940 Esco Flagship pinball: Want ball lift parts and bumper caps.
Contact:
Ben
1302 W Kristal Way
Phx, AZ 85027
Posted: 9 June 2008
1976 Midway Top Gun rifle shooting game hologram target assembly. I need this assembly to complete my game.
Contact:
Chris Calkins
voice: 913-207-4147
Posted: 9 June 2008
1987 Williams F-14 Tomcat Red and Blue beacon dome covers. The red one also was used in High Speed as well as a basketball game called Hot Shots. These don't have to be NOS, but I'd prefer no cracks.
Contact:
Gerry Manis
San Mateo, CA
Posted: 9 June 2008
1980 Bally Space Invaders. Original bumper caps and other plastics. Looking for a playing field for same machine (must be in great shape).
Contact:
Eric
1836 26 Ave Pl
Greeley, CO 80634
Posted: 8 June 2008
Need a complete 8 target drop target unit for Nine Ball.
Contact:
Dean
Edmonton, Alberta Canada
Posted: 8 June 2008
I am looking for a Batman Forever Speaker Display panel and power supply for the big display (its smaller in size the most other sega power supplies). I would like a complete panel but would buy what ever you have. Feel free to call any time day or night.
Contact:
James Johnson
voice: 417-207-6776
538 Hilltop Dr
Taneyville, MO 65759
Posted: 8 June 2008
Looking for a backglass for the Gottlieb Spin Out pinball machine mine got broken. Feel free to call any time day or night.
Contact:
James Johnson
voice: 417-207-6776
538 Hilltop Dr
Taneyville, MO 65759
Posted: 8 June 2008
Midway Flash Baseball (Bat Unit) and backglass
1950 United Shuffle Alley Express Suffle Bowling Pins (small 3" in height and blue ) really need 2 only.
If you have either give me a call or leave email with disc and price.
Contact:
Chris Kay
voice: 655-2919
3539 Timothy Lane
East Aurora, NY 14052
Posted: 8 June 2008
1940 Exhibit Supply Co. Flagship looking for parts to restore this game. its missing all the bumper caps 1 bumper assembly is broken and the ball lift knob/rod is missing please help me save this classic pre flipper game.
Contact:
Ben
voice: 623 398 4745
1302 W Kristal Way
Phx, AZ 85027
Posted: 7 June 2008
Looking for 1978 Gottlieb Dragon backglass. My pin has one but it is not in the best shape. Please give me a call if you have one.
Contact:
Matthew J. Fazio
voice: 214-415-7280
1109 Morningstar Trail
Richardson, TX 75081
Posted: 7 June 2008
Playfield plastic for a 1977 Gottlieb EM Vulcan. Particularly interested in the part that rests over the center playfield drop targets.
Contact:
Matthew J. Fazio
voice: 214-415-7280
1109 Morningstar Trail
Richardson, TX 75081
Posted: 7 June 2008
1952 Williams Four Corners, any parts
Contact:
Jeremy
Phoenix, Arizona
Posted: 6 June 2008
1972 williams Travel Time set of chimes.
Contact:
Arnold Goldstein
voice: 847-815-6257
751 E. Stark
Palatine, IL 60074 USA
Posted: 6 June 2008
Ramp for Williams Taxi. Departure ramp and Arrival ramp. It doesn`t have to be new but not bended or broken. Please make your offer if anyone have one. I`m In dallas and I can also picked up or pulled out from the machine if located in some garage etc.
Contact:
Fabio
Posted: 6 June 2008
I need two backglasses in good shape: 1967 Gottlieb Hi-Score 4 player, and 1964 Gottlieb Bonanza 2 player. If anybody could help, please email me.
Contact:
Nick
Posted: 6 June 2008
I'm looking for a pop bumper cover for a 1984 Bally Spy Hunter pinball machine. It has to be yellow and with the Spy Hunter head decal on it in good condition. This is my last needed part for full reconditioning. Please get back to me ASAP. I will pay good $$$ for good product. I will pay for all shipping and please get back too me ASAP.
Contact:
Clayton
Windsor, Ontario N9e 3h6
Posted: 6 June 2008
Looking for playfield plastics for Gottlieb Volley (Lower Left Plastic).
Looking for a good condition cabinet for Gottlieb Soccer.
Contact:
Eric
New Jersey
Posted: 6 June 2008
Looking for the three 'The Shadow' Mongul playfield figures with brackets.
Contact:
Bill
Posted: 6 June 2008
Stern VS-100 voice / speech board wanted. This was used in the following games: Flight 2000, Free Fall, Lightning, Split Second, Catacomb, Orbitor One and possibly others.
Contact:
Rob
Maine
Posted: 6 June 2008
1964 Williams Soccer playfield plastics wanted.
Contact:
Mike
Maryland
Posted: 5 June 2008
1981 Bally Xenon playfield. Does not have to be perfect could be in any condition.
Contact:
David
MA
Posted: 5 June 2008
1962 Bally Shoot-A-Line (bingo):
Backglass--Excellent condition wanted. One we currently have was badly touched up.
All paperwork--manual, schematic, S/I cards
1957 Bally Sun Valley (bingo):
S/I cards--mine are there but are so faded they are illegible.
Contact:
Daina Pettit
voice: 801-277-6296
Salt Lake City, UT
Posted: 4 June 2008
1971 Bally (Bingo Pinball) Stock Market: I'm looking for playfied parts
(White cover bulb)
Contact:
Fabian
Buenos Aires Argentina
Posted: 3 June 2008
Heavy Metal Meltdown: Looking for a playfield for a Heavy Metal Meltdown and anyone from the Cameroon should not reply to this. Can anyone please help?
Contact:
Steve
Station Road
Beds Mk45 2qu
Posted: 3 June 2008
I need a Backglass for a 1961 Williams Space Ship pinball. Please email me if you can help.
Contact:
Nick
Posted: 3 June 2008
I need a ball lift for a mid 1960s Williams. I need just the plunger rod but I'll buy the entire lift if need be. I have a Williams Merry Widow but I understand any mid 60s Williams machine will work.
Contact:
Gary Hargrove
Posted: 3 June 2008
I'm looking for a pop bumper cap. It's for a Flipper Cowboy. It's the 50 points spin. Green outside edge, white center with green writing.
Contact:
Randy Christensen
Danville, CA 94526
Posted: 3 June 2008
1980 Bally Xenon playfield: Wanting a cheap worn playfield locally
1980 Stern Nine Ball backglass -- NOS, excellent condition, or professionally repaired
1981 Stern Iron Maiden any game-specific parts
1988 Banzai Run any game-specific parts
1985 PinStar Gamatron translite -- NOS or excellent condition
1985 PinStar Gamatron conversion/kit instructions / documentation
1985 PinStar Gamatron software / game rom chips
1999 Revenge From Mars cabinet -- boards and monitor bonus but not required
1999 Star Wars Episode I cabinet -- boards and monitor bonus but not required
Contact:
Kelly
Plano, TX 75023
Posted: 2 June 2008
1957 Bally Mayfair: Need a ball lift motor.
Contact:
Marshall Harrell
3780 Recycle Rd
Rancho Cordova, CA 95742
Posted: 1 June 2008
1977 Gottlieb Jacks Open backglass. Mine is mostly peeled away on the lower half. Prefer to pick up rather than ship.
Contact:
David Buchanan
Santa Clara, CA
Posted: 1 June 2008
1986 Backglass for a Pinstar Gamatron pinball machine.
Contact:
Jen Farnham
voice: 9256986244
1182 Brookdale Lane
Livermore, CA 94551
Posted: 1 June 2008
1993 Williams Judge Dredd Eagle Topper. I have a nice Judge Dredd machine and I'm looking for a golden eagle topper. Please shoot me a note if you have one for sale. Either original or repro will work.
Contact:
Nile Roberts
Cary, NC 27519
Posted: 1 June 2008
I am looking for the back glass for a 1956 Fair Lady Gottlieb Pinball machine.
Contact:
Cindy Mahanke
2401 NE 72nd Street
Gladstone, MO 64118
Posted: 1 June 2008
Looking for a bottom cabinet complete with playfield and motorboard for Gottlieb Extra Inning.
Looking for a head complete with score reel board and backglass for Williams Argosy.
Need a mid 60's Gottlieb add a ball machine score card tray. This tray was used on several games from this time period. It has the red and blue dots around the outside.
Looking for a head with original paint for Williams Palooka. No guts or back glass needed.
Contact:
Dave Metrando
voice: 845-691-6205
Highland, NY
Posted: 1 June 2008
Bally Palm Springs Bingo: I need a replacement ball lift motor.
Contact:
Chris
Everett, WA 98208
Posted: 30 May 2008
1985 William's Sorcerer Backglass, Good Condition
1972 William's Swinger Back Box Parts; Ball Count Unit 33, Backglass. Score Wheel Contacts
Contact:
Mike
Penn Valey, California
Posted: 29 May 2008
1963 Williams El Toro backglass. Mine is mostly peeled away.
Contact:
David Buchanan
Santa Clara, CA
Posted: 28 May 2008
1976 Bally Bali bingo schematic wanted. Also known as Super Wall Street. I have a copy of Wall Street manual and schematic to trade if you can use one.
Contact:
Alan Amon
Posted: 28 May 2008
Wanted: Gottlieb Miss Annabelle (1959) parts, playfield & backglass animation plastics, coin door with working coin accepter mechanism.
Contact:
Pinballphreak
Posted: 28 May 2008
Need a Monster Bash Translite. Used or NOS as long as its in great shape.
Contact:
Anthony Daley
voice: 330-232-1746
Ohio
Posted: 28 May 2008
I'm looking for the boards from a Williams WPC Dot matrix machine. These are the machines that used them:
1991 Midway Gilligan's Island
1994 Midway Hot Shot
1991 Midway Party Zone
1991 Williams SlugFest
1991 Williams Hurricane
1991 Williams Terminator 2: Judgment Day
Please email with price, and shipping.
Contact:
Robert Campbell
Po Box 148
Otis Orchards, WA 99027
Posted: 28 May 2008
Looking for a Back Box for Spiderman Or a Countdown Backbox. Also looking for guys That Can Paint Backbox for Spiderman. Lost Number.
Contact:
Gary Eggers
Iowa 50476
Posted: 28 May 2008
Looking for a 1950 Gottlieb Bank A Ball, Any condition considered.
Contact:
Greg Filek
Posted: 27 May 2008
Looking for a good backglass for a Williams Solar Fire.
Contact:
Gordon Coles
Posted: 27 May 2008
Looking for any Stern Orbitor 1 Pinball Parts for my game restoration. Also looking for original legs for this same game. Please let me know if you have any parts at all.
Contact:
Mike Milligan
San Jose, CA
Posted: 27 May 2008
1981 Stern Split Second backglass wanted in good condition.
Contact:
Paul Rullo
voice: 402-563-2283
2704 Cheyenne St
Columbus, NE 68601
Posted: 27 May 2008
Looking for a williams Comet spiral ramp and parts for the pinball. Please let me know if you have anything available.
Contact:
Timothy A Bourdeau
voice: 519-633-0779
2 Foxcroft Cres
London, On N6k 3a4
Posted: 26 May 2008
I know it's a long shot but I am looking for the light insert below the strike target on a Gottlieb spot bowler, it has an 'X' on it.
Contact:
Glen Peters
voice: (714) 745-1783
Posted: 26 May 2008
1971 Gottlieb Challenger: Need both lockdown bars and the rear access door.
Contact:
Ken Fleck
voice: (262) 376-2222, fax: (262) 376-2222
W68 N275 Evergreen Blvd.
Cedarburg, WI 53012
Posted: 25 May 2008
1978 Bally Power Play playfield. Looking for a playfield for a Bally Power Play. Playfield must be a NOS playfield or a 9 out of 10 condition.
Contact:
Jed
Posted: 25 May 2008
Looking for the bell clapper that goes on the one point stepper unit on a 1965 Williams Teachers Pet. Any leads would be appreciated!
Contact:
Mike Rasmussen
9230 Foxen Circle
Lincoln, NE 68526
Posted: 25 May 2008
Williams Jokerz: Interested in a upper playfield plastic base and playfield plastics for a Williams Jokerz. Please e-mail me with condition and price.
Contact:
David Campbell
27344 Watkin
Olmsted Township, OH 44138
Posted: 25 May 2008
Gottlieb Hi-score Backglass needed.
Contact:
Larry Marks
3730 Redondo Beach Ave.
Redondo Beach, CA 90278
Posted: 24 May 2008
I am looking for any Bally cabinet from 1977-79? I want to restore a 1978 Bally Bobby Orr Power Play machine that has been in my garage for over a year but termites had a feast on the bottom cabinet. The head unit is OK but the bottom is too bad for my liking if I want to restore. If you have one or know where I might get one, PLEASE contact me.
Contact:
Jeff Miller
voice: 813-963-1199
Posted: 24 May 2008
Looking for a Big Indian backglass that is no worse than a 6 or 7 out of 10 condition.
Contact:
Tim Sholund
voice: 260-432-3443
2525 W. Jefferson Blvd.
Fort Wayne, In 46802
Posted: 24 May 2008
1977 Gottlieb Super Spin/Jet Spin plastics (right slingshot)
Contact:
Mike Kapeller
Posted: 23 May 2008
Looking for an NOS playfield for Gottlieb Totem.
Contact:
Richard Strunks
Posted: 23 May 2008
Wanted: Addams Family playfield, new or used.
Contact:
Kent
Posted: 23 May 2008
Wanted: Parts for Firepower pinball. Looking for a MPU board, backglass and left slingshot plastic. Notes: The MPU board is a Williams System 6A. I believe the left slingshot plastic is part #30C-447-4
Contact:
Steve
Gainesville, Florida
Posted: 23 May 2008
1964 Gottlieb North Star cabinet and playfield wanted. Should be in good to very good condition. Prefer original paint and minimal playfield wear, but will consider all. Okay if some parts are missing.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 22 May 2008
1975 Gottlieb Abra Ca Dabra backglass.
1961 Gottlieb Big Casino backglass, lockdown bar.
1958 Williams metal coin door with big red "W" circle in middle.
Contact:
Tim
Viroqua, WI USA
Posted: 22 May 2008
1975 Gottlieb Pin-Up playfield wanted. Good to excellent condition wanted, but will consider anything with minimal paint loss. Okay if parts are missing, but should not have hacked wiring.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 22 May 2008
Looking for a source to aquire a few Chicago Coin coin door stickers/decals for a 1969 Yankee Baseball and a 1976 Sound Stage. They are the rectangular blue ones. Any sources or suggestions?
Contact:
Bill Deacon Jr
Garden Grove, CA 92845
Posted: 22 May 2008
Looking for a sound board for an Indiana Jones pinball - or from the same vintage - I have the sound roms.
Contact:
Mike Milligan
San Jose, CA
Posted: 22 May 2008
Need a backglass for 1974 Bally Bon Voyage machine, or information where I may buy a new one.
Contact:
James Seay
voice: 434- 237-2405
VA. 24501
Posted: 22 May 2008
1959 Williams Sea Wolf Backglass
Contact:
Kip
Posted: 21 May 2008
Looking for some spare parts for the mini-playfield in my Doctor Who. The parts are the mini-playfield plastic cover, and the decal:-
03-8666 Cover
31-1688 Decal
The above info is from page 2-31, Operations Manual 1992. Anybody any ideas?
Contact:
Brian Beamish
Manchester M32 8dq United Kingdom
Posted: 21 May 2008
Looking for an Atari Superman Center playfield plastic (covers drop targets) in good, not broken or chipped condition.
Contact:
Mike Milligan
San Jose, CA
Posted: 21 May 2008
Restoring 2 Chicago Coin pins 1972/73 Casino and Riviera. looking for aprons and plunger scales for both. and any other parts for these machines. will be interested in any cosmetic parts in very good condition.
Contact:
Brian Drummelsmith
voice: 517 230-9830
1113 Haslett Rd
Haslett, Micnigan 48840
Posted: 21 May 2008
I have a 1970 Midway, Invaders From Outer Space EM stand up arcade game. I desperately need any/all paperwork for this thing and I need a cannon motor. If anyone, I repeat, if ANYONE has this machine please email me. I need some pictures to see how this motor mounts, what kind it is and where I can maybe find a replacement. Any and all help would be so much appreciated.
Contact:
Steve Campbell
Posted: 21 May 2008
1980 Blackout backglass or translite wanted/needed.
Contact:
Marco
Posted: 20 May 2008
Wanted for a 1986 Williams Pinbot: A vortex spiral ramp - prt# B1152, and the blue playfield plastic at the ramp lift.
Contact:
Wes Dolen
voice: 239-354-0965 or 239-643-1100
2066 50th Terr SW
Naples, FL 34116
Posted: 20 May 2008
Need playfield plastics set for Gottlieb Target Alpha.
Looking for export version plastics set for 'Hit A Card' or 'Solitaire'. These have the same artwork as the domestic 'Diamond Jack' and 'king Of Diamonds', except the background color is blue instead of green. Also need center plastic for Bally 'Hi Deal'. This is the clear oval one that covers the kick-out hole in the center of the playfield.
Contact:
Joe
NY
Posted: 19 May 2008
All parts wanted -plastics, ramps, boards, decals, and game specific parts
Data East Simpsons
Bally Elvira and The Party Monsters
Williams F-14 Tomcat
Williams Earthshaker
Williams Pinbot
Contact:
Ray Scalf
El Paso, Texas 79930
Posted: 17 May 2008
Chicago Coin All Stars Baseball 1968 backglass any condition or good scan or hi res picture (so I can make a reproduction).
Contact:
Dan Lejnieks
Posted: 17 May 2008
Getaway: High Speed II, Looking for a complete set of under the playfield lamp boards. Twist-in sockets not required, just the lamp PCBs.
Contact:
Brent
Ontario Canada
Posted: 17 May 2008
1948 Genco Mardi Gras backglass. Any condition, or even a scan that could be used to make a translite.
Contact:
Josh A.
CO
Posted: 16 May 2008
1972 Williams Fun Fest. Looking for a 100 pop bumper cap with pink sun burst in good condition with no burn marks.
Contact:
Jude
Ellicott City, MD
Posted: 16 May 2008
1997 Williams No Good Gofers: Looking for the plastic that covers the putting green on NGG. New or unbroken used OK.
Contact:
John
Posted: 16 May 2008
Display Harness/wiring for Bally Evel Knievel. This is the one that from the displays and goes to most of the boards and continues to the power supply. Some of the Bally's are different as I have found out as the power supply connector has fewer pins that it should have. I live in New Zealand and can pay via Paypal. I can supply a US address for postage if posting overseas is unsuitable. My game is dead without this harness, I hope someone can help me.
Contact:
Clive Pedersen
New Zealand
Posted: 16 May 2008
Wanted: Decoder module (circuit board) for Sonic Night Fever. Must be working.
Contact:
Patrick
Victoria Australia
Posted: 16 May 2008
Wanted: Backglass for United Super Shuffle Alley circa 1950. A 1949 glass will also work.
Contact:
Ken Sura
voice: (203) 876-8506
12 Daytona Ave.
Milford, CT 06461
Posted: 16 May 2008
1971 Gottlieb Dimension. Want right side target plastic or all plastics.
Contact:
Joseph
Posted: 15 May 2008
I am looking for an upper playfield plastic for Playmatic Rio and manual.
Contact:
Greg Treiber
Posted: 15 May 2008
I have a Williams Scorpion Pinball for home use. Looking to replace the 3 coin slots with silver metal solid pieces. The middle one with the "W" logo on it. Please contact if you have the pieces.
Contact:
Michael
Posted: 15 May 2008
Looking for playfield plastics for Roto Pool. Please email or call
Contact:
Jc
voice: 304-633-1540
Huntington, WV 25504
Posted: 15 May 2008
Need an EM bottom mech panel (the entire panel with the score motor and relays) for a 1976 Gottlieb Jacks Open or Lucky Hand, in any condition.
Contact:
Clay
Posted: 15 May 2008
Wanted: Early 1960s lower Gottlieb wedge head cabinet, empty ok
Xenon playfield
High Diver lower cabinet empty ok
Contact:
Chuck
voice: 401-569-2010
14 Teakwood Dr
Johnston, RI 02919
Posted: 15 May 2008
1969 Gottlieb Airport playfield.
Contact:
John
2379 NW 30 Rd.
Boca Raton, FL 33431
Posted: 14 May 2008
The Williams 999 credit replay wheel.
Contact:
Joe
Posted: 14 May 2008
1970 Gottlieb Stock Car Backglass -- good to excellent condition.
Contact:
Dan Stanford
voice: 617 230 8785
Acton, MA 01720
Posted: 13 May 2008
1994 Sega Apollo 13 Playfield plastic set, complete or specific pieces, good or NOS condition preferred, Atlanta area.
Contact:
Steven Seale
Posted: 13 May 2008
Looking for Bally Fireball Home Model flipper coil. May also need other parts.
Contact:
Frank
WI
Posted: 13 May 2008
Looking for a Black Knight 2000 marquee topper that goes on top of the game. New, used or repo is fine with me. Let me know what you have and how much.
Contact:
John P. Dayhuff
voice: 269-979-3836
Battle Creek, Michigan
Posted: 13 May 2008
1993 Williams Bram Stoker's Dracula Looking for the Castle Lock opto board and the long opto board for the Mist Multiball.
Contact:
Chris Heflin
voice: 703-618-3628
5225 Southampton Dr.
Springfield, VA 22151
Posted: 12 May 2008
Gottlieb System 80 CPU (Star Race)
Contact:
Paul Howlett
voice: 703-361-0420
Manassas, VA 20109
Posted: 12 May 2008
Looking for 1958 Williams Gusher pinball backglass. Any condition considered from poor to repro.
Contact:
Barry
Posted: 12 May 2008
Looking for White Water Topper.
Contact:
Tony
Posted: 12 May 2008
Looking for a Gottlieb lower apron. It would come from one of the following games: World Fair, Tropic Isle, Rack A Ball, Gigi, Slick Chick, Sweet Hearts, Cover Girl, or Olympics. I believe all these games have the same apron. If you have one of these machines to part out, I just need the lower apron in good condition. Willing to pay above market value for a nice one.
Contact:
Dave Prater
voice: 618-833-4012
Anna, IL 62906
Posted: 12 May 2008
Looking for decent backglass for Gottlieb's Astro or complete or incomplete head.
Contact:
John
Posted: 12 May 2008
1940 Bally Defender gun game backglass needed (Ray-O-Lite type gun game). Backglass has artillery scene at the bottom, planes & clouds at the top (scoring is in the clouds) and a clear area in the center where the mechanical plane flies. If you think you might have one, I can send you a picture to confirm. Interested to hear from anyone else who owns this game as a picture of good backglass would also be a great help. Also need sight/scope for the gun, schematics, manual, and flyer.
Contact:
Phil Sexton
Colorado Springs, CO
Posted: 12 May 2008
Wanted: Topper for Pinbot and complete 3 bank tarket on left side of playfield. Also need gun for Williams Dirty Harry.
Contact:
Jeff Yingst
voice: 717 507 5442
1154 Suedburg Rd
Pine Grove PA, PA 17963
Posted: 12 May 2008
1950 to 1955 Gottlieb woodrail bare cabinet & head wanted. Paint or no paint, just as long as it's in solid condition. Prefer something in the area of Atlanta or south GA/north FL if possible.
Contact:
Rob
Posted: 11 May 2008
1987 Williams Fire! I need a fire tube for under the playfield, or just the decal to go on the tube. Mine somehow disintegrated off of the clear tube.
Contact:
Andrew Sneed
Posted: 11 May 2008
Looking for a 1971 Bally The Red Max Backglass. If you have one stashed away I can buy, please contact me.
Contact:
Kory Hankin
voice: 301-931-9001
Rockville, MD 20852
Posted: 11 May 2008
Looking for original Gottlieb Drop A Card bottom cabinet. Looking for plastic set for Williams Firepower.
Contact:
Dennis Cole
voice: 631 871 7778
Mastic Beach, NY 11951
Posted: 11 May 2008
1977 Gottlieb Jet Spin: Looking for playfield plastics.
Contact:
Don B.
Washington, PA 15021
Posted: 10 May 2008
1981 Stern Catacomb backglass, anywhere from minor peeling to mint.
1981 Stern Catacomb yellow pinball from backbox game, any condition.
Contact:
Bronson Wagner
Westminster, MD 21157
Posted: 10 May 2008
I am in need of the following parts for a 1992 Data East Hook machine:
Apron, translite, speaker assembly/panel, coin door, any circuit boards, spiral red rope light, right small ramp. The parts can be new or used.
Contact:
Joseph Voyt
613 Beech St.
Scranton, PA 18505
Posted: 10 May 2008
1962 Gottlieb Tropic Isle backglass
1950-54 Gottlieb parts to restore a fire damaged game.
1959 Bally De Luxe Club Bowler Backglass
Contact:
Jim D. In Tn
Dandridge, TN 37725
Posted: 9 May 2008
I am looking for a Bally Vampire backglass in good condition. I am willing to pay extra for a nice one. Will also pay a finder's fee for a successful lead.
Contact:
Jesse
WI
Posted: 9 May 2008
United Star Slugger bat assembly unit
Contact:
Joe
Posted: 9 May 2008
United Star Slugger replay unit
Contact:
Joe
Posted: 9 May 2008
WTB: Captain Card backglass and Captain Card apron with credit light. Please e-mail.
Contact:
Zak
Albany, NY
Posted: 9 May 2008
Looking for two parts to a Space Station pinball machine. One part is the black ramp on the right side. The other part is the small white space station on the playfield above the ramp that spins. Please let me know the pice and condition.
Contact:
Scott
Posted: 8 May 2008
Looking for an Atari Superman Backglass in nice shape. A repro is very welcome. Superman needs to fly again.
Contact:
Kaspar
voice: +41765264276
Thun Switzerland
Posted: 7 May 2008
Looking to buy any WPC95 backbox PCBs.
Contact:
Andrew Perry
voice: 040-768-6411
24 Actoal Drive
Montrose, Victoria 3765
Posted: 7 May 2008
Backglass and score reels for a Gottlieb 1963 Flying Chariot.
Contact:
Peter
Melbourne Australia
Posted: 7 May 2008
Need plastic for a Shangri-La will take any or all.
Contact:
Kevin Good
voice: 610-972-8592
6694 Horseshoe Rd
Orefield, PA 18069
Posted: 7 May 2008
1993 Williams Bram Strokers Dracula Transformer part #5610-12835-00
Contact:
James Rosenthal
voice: 843-509-4844
SC
Posted: 6 May 2008
Safe Cracker tokens wanted, US only.
Contact:
Kevin Johnson
3558 E Kimball CT
Gilbert, AZ 85297
Posted: 6 May 2008
Looking for Pinball Backglasses-
Little Joe by Bally
Hee Haw by Chicago Coin.
Contact:
Mike
voice: 310-600-0250
Redondo Beach, CA
Posted: 5 May 2008
Wanted: A wireing loom for a Bally Addams Family.
Contact:
Glyn
Posted: 5 May 2008
1995 Williams Dirty Harry
Need:
Left slingshot plastic, unbroken
44 magnum shooter handle, also used on Indiana Jones, any condition
Original owners manual and op handbook
Would consider a complete used or NOS plastic set, empty backbox with nice sideart, and an unfaded speaker panel plastic.
Contact:
John Wart, Jr.
voice: 812 378 3179
Columbus, In 47203
Posted: 4 May 2008
Looking for a nice original or repro backglass for a Gottlieb Bank A Ball from 1950. Also looking for a nice top plastic for the same.
Contact:
Darryl Anderson
Richfield, MN
Posted: 4 May 2008
Need lock down bar end caps for a 1967 Chicago Coin Twinky
Contact:
Izzy Schwartz
Posted: 4 May 2008
Seeking back box only for Surf Champ, will pay up to $400.
Contact:
Geoff
NY
NY
Posted: 4 May 2008
Looking for the schematics of a Gottlieb Spring Break. Please let me know where to find, order, anything. Or some values on what to measure were, cause I think it is caused by a angry power supply.
Contact:
Christophe Feyen
Paulusstraat 47
Herk-de-stad, Limburg 3540 Belgium
Posted: 3 May 2008
Need the following Gottlieb System 3 parts:
MA-1558 Optical Interface Boards Qty. 4
MA-1330 Opto Transmitter LED Board Qty. 4
MA-1331 Opto Receiver LED Board Qty. 4
MA-1361 Alphanumeric Display Board Qty. 1
Wanted any System 3 boards of any kind regardless of condition working or not.
Contact:
Brian Finniff
Posted: 3 May 2008
Looking for the 3 door target for the Bally's Dr Who Pinball. Any information to locating this part or something that can be used in place of it will be helpful.
Contact:
David Villar
Posted: 3 May 2008
1960 Kewpie Doll pinball plastic wanted. I will buy an entire set, or just the bigger top left plastic, it is missing in my game.
Contact:
Rick
Posted: 2 May 2008
Looking for parts for 1968 Williams Ball Park pitch and bat machine. Please contact with any info.
Contact:
John Thompson
680 N. Craig Pl.
Lombard, IL 60148
Posted: 2 May 2008
Wanted: 1980 Stern Flight 2000 backglass. I'm looking for something in a condition consistent with my game, which does not justify the reproduction.
Contact:
Dave Casey
Texas
Posted: 2 May 2008
Williams 3 Jokers backglass must be in good condition. Contact Bob at 585-586-5736.
Contact:
Bob
voice: 585-586-5736
Pittsford, NY
Posted: 2 May 2008
1967 Bally Cosmos backglass any conditon considered my machine has none, any help would be appreciated.
Contact:
John
304 S Babcock St
Tellico Plains, TN 37385
Posted: 1 May 2008
1990 Williams Diner. Looking for playfield plastics and right ramp.
Contact:
Kurt
voice: 612-987-2877
Posted: 1 May 2008
Bally Mini Zag back glass. Must be very good. Email me if you have anything.
Contact:
Gary Hargrove
Posted: 1 May 2008
Chicago Coin Ray Gun backglass. NAVL broke the backglass on a beautiful Ray Gun gun game I just had delivered, and I want to see if there could be one available for sale or trade, before I file the claim as a total loss. I've got lots of backglasses and NOS playfields if you'd like to trade, or will pay top dollar.
Contact:
Randy P.
Long Beach, CA
Posted: 1 May 2008
Looking for a Blue Chip bingo lockdown bar, coin door and playfield.
Contact:
Ray
VA.
Posted: 1 May 2008
1962 United Bonus Baseball pitch and bat
Need plastic runners in back box and also the plastic pitcher. Need the bat that strikes the balls and the bat that player uses to activate the swing of the playfield bat.
Contact:
Tim Nagel
voice: 608-214-7177
306 E 7th Ave
Brodhead, WI 53520
Posted: 30 April 2008
Need plastics for Willaims 1964 Zig Zag, plastic in the middle of the playfield only or complete set.
Contact:
Yannick
Posted: 30 April 2008
Elvira and The Party Monsters: Looking for the decal for the front cabinet door.
Contact:
Cheryl Cavin
Posted: 28 April 2008
Looking for a Gulfstream playfield in beautiful shape. I know they're rare. The spanish version by Segasa would be fine as well, as the Segasa playfields held up incredibly well.
Contact:
Don Owen
4119 Sharp
Glenelg, MD 21737
Posted: 28 April 2008
Looking to buy a Captain Card backglass. Must be in good shape. Please e-mail pictures and price.
Contact:
Zak
Albany, NY
Posted: 28 April 2008
Demolition Man plastics 31-1919-22 and 31-1919-16 and cabinet decals repos fine.
Contact:
Peter
William
Melbourne, Victoria 3147
Posted: 28 April 2008
Restoring a Gottlieb Three Score and I am looking for a wiring diagram and replacement parts.
Contact:
Melissa
Posted: 27 April 2008
Little Chief playfield parts.
Contact:
Scott Adams
voice: 207-472-3187
36 Greenj St.
Fort Fairfield, Maine 04742
Posted: 27 April 2008
Williams Time Warp backbox assemply Complete (or mostly complete).
Contact:
Darin
25201 Bunting Circle
Land O Lakes, FL 34639
Posted: 27 April 2008
1996 Sega Independence Day Alien Head casting. Part#545-5717-01 and #545-5718-01.
Contact:
Michael Mech
voice: 920-980-5218
14025 Autumn Ridge Dr.
Valders, WI 54245
Posted: 26 April 2008
Bally Capt. Fantastic plastic lane guide, 2 singles, 2 doubles.
Contact:
Tim
Posted: 26 April 2008
Wanted: Complete Backglass, Schematic and Coin-in Mechanism for 1975 Bally Knockout. Backglass needs to be complete, but not perfect. Am trying to re-wire for coin usage, was ripped apart and wired for free play many years ago.
Contact:
Nick Tornow
voice: 309-397-3186 (cell)
416 Willow Court
East Peoria, IL 61611
Posted: 26 April 2008
Wanted: backglass for 1973 Bally Ro-Go, must be mint or very close to perfect. Good money for the right glass.
Contact:
Eric Spangler
voice: 717-919-3282
1004 Royer Road
New Bloomfield, PA 17068-usa
Posted: 26 April 2008
Looking for a good Sky Line playfield. also looking for Ace High Plastics.
Contact:
Rob
Posted: 25 April 2008
Looking for an NOS or nice used Twilight Zone playfield.
Contact:
Joe
Burbank, CA
Posted: 25 April 2008
Wanted: Terminator 2 translight. New or good condition used. Please email with details and your price including shipping to Illinois.
Contact:
Brian
Streator, IL
Posted: 25 April 2008
1962 Williams Tradewinds Pinball backglass wanted. Any condition. Also advise if any other parts available. Also looking for complete Tradewinds machine in good condition.
Contact:
Don Klein
Posted: 24 April 2008
1969 Williams Seven Up: Desperately Need Playfield and Ball Count Stepper
1962 Williams Friendship 7: Same as above, looking for Playfield
60 Model Gottlieb White Aprons: I need 2 white with red/blue trim Gottlieb Aprons. These are the model that has the ball count lights on the left side cut-out.
Contact:
Steve Campbell
Norman, OK 73072
Posted: 24 April 2008
1979 Bally Nitro Groundshaker Backglass: Looking for a 8 backglass to completed my restoration. Top dollar paid. I will be at Allentown hopefully someone out there can help me bring this pinball back to its glory days.
Contact:
Tom
voice: 570-994-3300
105 Buttermilk Heights Dr
East Stroudsburg, PA 18301
Posted: 24 April 2008
DE Simpsons playfield plastics wanted. Just picked up the machine and have several cracked and missing pieces. Tell me what you've got.
Contact:
Sam
Athens, GA
Posted: 24 April 2008
Gottlieb Monte Carlo left sling plastic, doesn't necessarily have to have the lamp dome, mine is good. Send a pic with price including shipping to Canada.
Contact:
Shawn
Alberta Canada
Posted: 24 April 2008
I need 5, 10 and 25 Mechs for a 1960 Gottlieb machine. These can be 'Cutters' or any brand as long as they work. I am only searching for mech's that work, not ones that work every third time and/or 'they worked the last time I had them in my Gottlieb machine!' Please don't waste my time and I will only purchase those that really do work. Also looking for the frame parts that hold the mech's into place on the back of the Gottlieb Coin Box. It's called the back frame, the coin chute saddle and the reject rod and spring. I could probably use the vibration damper as well. Thanks in advance and if you have these parts please email me.
Contact:
Steve Campbell
Norman, Oklahoma 73072
Posted: 24 April 2008
Backglass for 1962 Rack-A-Ball, good to excellent condition. Can pick up in Allentown.
Contact:
Terry Foulk
voice: 816-935-7562
908 SW Georgetown St
Lees Summit, MO 64082
Posted: 23 April 2008
Bally Galahad, nonworking machine and/or parts for early 1970s Bally EM machines that are compatable.
Contact:
Scott Osborne
8744 Hubbard Drive
Galloway, Ohio 43119
Posted: 23 April 2008
Gottleib Lock down bar for 1962 Rack-A-Ball length 22 6/16" With 1 1/4 " distence between bolt heads is 7".
Contact:
Terry Foulk
voice: 816-935-7562
908 SW Georgetown St
Lees Summit, MO 64082
Posted: 23 April 2008
Lock down bar for a Williams Star Trek The Next Generation. Can pick up in Allentown.
Contact:
Terry Foulk
voice: 816-935-7562
908 SW Georgetown St
Lees Summit, MO 64082
Posted: 23 April 2008
Plastics uper right and left and center right and left for a 1958 Roto Pool. Also need a playfield glass for this machine. Can pick up in Allentown.
Contact:
Terry Foulk
voice: 816-935-7562
908 SW Georgetown St
Lees Summit, MO 64082
Posted: 23 April 2008
Wanted Game Plan MPU board for Sharp Shooter 2. Working only!
Comet Playfield. Populated or not.
Contact:
Dave
Posted: 23 April 2008
1964 United Puck Bowler: Looking for the coin mech bracket and credit switch, 10 cent coin mech and the chrome eject knob (I think it's part of the bracket). I have the coin door, but I'll buy another one if it's complete with the coin guts. If anyone has a picture of the part I'm looking for I'd appreciate that, so that I know what I need looks like.
Contact:
Klorvin Borno
Posted: 22 April 2008
I have a 1947 Bally Melody Roll machine that has been setting many years. Does anyone have the wiring schmatics for this machine?
Contact:
Tad Petrie
voice: 309-444-2614
1303 Pine Tree Drive
Washington, IL 61571
Posted: 22 April 2008
I'm looking to find the spring loaded ball shooter for a 1972 Chicago Coin Mini-Baseball game in good condition.I have a link to the pictureof the piece on the bottom right corner of the game. If you have the whole front door to sell from a non-working game, that would be great as well. As long as that mechanism is working well.
Contact:
Timm Buechler
voice: 920-450-6806
Posted: 21 April 2008
Wanted: Lock down bar for 1962 Williams Trade Winds pinball. I'm sure many Williams lock down bars from the early 1960's will work. Must be in good cosmetic shape.
Contact:
Doug Huber
voice: 314-229-9634
1703 Shiloh Ridge Rd.
Chesterfield, Missouri 63005
Posted: 21 April 2008
Wanted: Complete top half of 1971 Gottlieb Astro pinball machine, was seperated during a move and lost. Will consider major parts of top section also.
Contact:
John Marchelli
Posted: 21 April 2008
Looking for a Kings of Steel pinball machine cabinet. It has to be in good shape with no peeling of the stickers, good colors, etc. Can be complete non working machine. Or it can be missing parts just as long as the cabinet is nice.
Contact:
Steve Orringer
voice: (919)965-8370
487 Herring Road
Princeton, NC 27569
Posted: 19 April 2008
Looking for parts for a Data East Checkpoint. Wanted full parts machine or playfield parts and ramps.
Contact:
David
Chatham, Ontario Canada
Posted: 19 April 2008
Need a Bally Rolling Stones back glass.
Contact:
Steve
Jacksonville, FL
Posted: 18 April 2008
Doctor Who - Dalek 'Wobble' head kit. I've seen instructions on how to make one, but I'm useless at metal bashing. I'd really like to get this head moving as the original designers intended.
Contact:
Brian Beamish
Manchester M32 8dq United Kingdom
Posted: 17 April 2008
Front decal and the header box LHS and RHS decals for a Demolition Man, repros fine.
Contact:
Peter
Melbourne Australia
Posted: 17 April 2008
1950s Williams Ten Strike or Ten Pins backbox (head) needed, any body have any parts available?
Contact:
Ron Gaukel
voice: 760-687-5749
Carlsbad, California 92009
Posted: 16 April 2008
For Theatre of magic (Bally) I hope I can explain what I need (because of my poor English):
On the Entrance of the right plastic Ramp (on the right side of this ramp) there is an iron part on the post in front of this ramp, which holds the roof-like plastic over this ramp on the beginning. This small iron-part I would need. If someone has this part please let me have a Photo via E-mail and price for it.
Contact:
Löw Michael
Aumühlstrasse 6
Traun, Austria 4050
Posted: 16 April 2008
Looking for a playfield for a Gottlieb Free Fall. Doesn't have to be perfect, but need one with no major wear or cracking. I have a Mata Hari (SS), or a Williams Trade Winds PF that I would trade, or will buy outright. Also could use wedgehead lightbox for either Free Fall or Sky Jump. Just the empty box, no insert is OK. Will be at the Allentown show.
Contact:
Joe
NY
Posted: 16 April 2008
Wanted: NOS playfield plastic set for Williams Space Station. Also need right ramp- no cracks. Can p/u at Allentown show.
Contact:
Ernie Liffers
voice: 770 886-5172
2150 Pilgrim Mill Circle
Cumming, GA 30041
Posted: 16 April 2008
1980 Bally Space Invaders playfield. Nice used with minimal wear or NOS. Email with price and pics. Would prefer Allentown delivery.
Contact:
Tom Drum
359 W Sawmill Rd
Port Matilda, PA 16870
Posted: 15 April 2008
Backglass for Williams Smart Set Wanted. Any condition. also looking for Williams Travel Time Pinball any condition.
Contact:
Robert
Hazleton, PA 18201
Posted: 15 April 2008
Chicogo Coin Casino backglass.
Contact:
Tracy Lomberk
voice: 407-435-6338
3209 Timothy Street
Apopka, FL 32703
Posted: 15 April 2008
Need a left slingshot plastic for a 1966 Williams Hot Line EM pin. Will buy whole set if you dont want to break up,
Contact:
Kevin Mchugh
voice: 973-345-3944
Posted: 15 April 2008
Wanted to buy Bally Rolling Stones backglass or translite copy. Im in UK so translite better for shipping purposes unless someone in the UK has a glass in which case I'm willing to collect. Cash waiting as needed to save machine from scrap!
Contact:
Steve Pagett
Birmingham UK
Posted: 15 April 2008
1953 United Nevada bingo: Looking for backglass.
Contact:
Pierre Galarneau
Sainte Madeleine, Québec Canada
Posted: 14 April 2008
1956 Bally Night club bingo, looking for backglass.
Contact:
Pierre Galarneau
Sainte Madeleine, Québec Canada
Posted: 14 April 2008
1963 Bally Cross Country backglass, any condition.
Contact:
Susan
voice: 302-242-2284
DE
Posted: 14 April 2008
Looking for any paperwork (manuals, flyers, shop manuals, schematic, etc.) for the 1970 Gottlieb Baseball EM game. Also, I need information as to the dimensions of this game (LxWxH for both the playfield case & backglass/backboard unit seperately), as I will be picking one up next month myself out of state & want to bring an appropriate size vehicle, along with tips as how to remove the back unit from the playfield for the purpose of transporting it home.
Contact:
Ken Robinson
voice: 315-335-9985
1000 Mustang Dr. Apt. 17
Rome, NY 13440 USA
Posted: 13 April 2008
Jokerz! Translite.
Contact:
Michael Sills
21846 S. Vermont Ave #1
Torrance, CA 90502
Posted: 13 April 2008
1963 Bally Cross Country Blackglass
Contact:
Richard Clark
voice: 302-242-0484
263 S. Main St
Camden, DE. 19934
Posted: 12 April 2008
Looking for a Shoot a Line bingo/six card back-glass from 1963. Must be in good condition.
Contact:
Ben
Bloomsburg, PA
Posted: 12 April 2008
Need playfield plastics set for Gottlieb Target Alpha. Can pick-up at Allentown show.
Contact:
Joe
NY
Posted: 12 April 2008
1967 Williams Apollo and Magic City. Looking for excellent condition playfields for either or both these machines, populated or not. I will pay top money for ones in said condition.
Contact:
Doug Redfarn
England, UK
Posted: 11 April 2008
Eros One drop targets part #315-01-3651 & 315-01-3652
Contact:
Patrick Curtin
voice: 301-881-4859
608 Rollins Ave
Rockville, MD Montgomery
Posted: 11 April 2008
Looking for a Backglass for a Bally Quarterback. They were built between 1976-1977.
Contact:
Terrance
Burlington, Ontario L7t 1j6, Canada
Posted: 11 April 2008
Want to buy a nice backglass for Gottlieb EM Cleopatra. Would like to pick it up to avoid shipping. Would like to stay within 300 or so miles of Quincy, IL.
Contact:
Dennis
Quincy, IL
Posted: 11 April 2008
Looking for a backglass and playfield plastics for a 1963 Gottlieb Gigi. Would buy a parts machine if priced as a parts machine. Send a picture and your location along with prices. Also would like to stay within 250 miles of Quincy IL.
Contact:
Dennis
Quincy, IL
Posted: 10 April 2008
Wanted: Backglass for 1976 Gottlieb Spirit of 76'. Must be at least an 8 out of 10, a few scratches are ok, no flaking, no cracks. Please email.
Contact:
John Desmond
voice: 847 826 4012
1622 Brandon Road
Glenview, IL 60625
Posted: 10 April 2008
1977 Bally Evel Knievel, change - control mechanism thats attached to the inside of the front door, the change goes through it and it has a couple buttons for the diagnostics and the reset I think, I need a nice shape one, no rust.
Contact:
Elwood
Arlington, TX
Posted: 9 April 2008
1949 Gottlieb College Daze Backglass.
Contact:
Danny Altice
voice: 540-343-2314
1026 Alison Lane
Vinton, Virginia 24179
Posted: 8 April 2008
Looking for the following parts for my Williams Fire
Playfield - any condition considered
Fire Plug assembly, especially the paw
all plastics
flame tube
I would also be interested in non working or project game.
Contact:
Mick
OH
Posted: 8 April 2008
I have a working Pink Panther Pinball for sale.
Contact:
Richard Lilak
voice: 508-420-5594
29 Appaloosa Way
Marstons Mills, MA 02648
Posted: 8 April 2008
Wanted: Round Drop Target Decal Sets for Banzai Run and also Getaway: High Speed II
Contact:
Jeffs
Posted: 8 April 2008
Looking for the following backglasses:
Slick Chick Gottlieb
Flipper Parade Gottlieb
Contact:
Frank
Posted: 8 April 2008
Looking for a decent glass for a Williams Kismet.
Contact:
Darryl Anderson
Richfield, MN
Posted: 7 April 2008
Parts needed for Williams Hurricane: Upper orbit ramp with stickers. Lower Hurricane ramp. Orange Plastics above dunk the dummy.
Contact:
Ken Fleck
voice: (262) 376-2222
W68 N275 Evergreen Blvd.
Cedarburg, WI 53012
Posted: 7 April 2008
Need a Champion Pub backglass urgent. If not the original, I can buy a good copy too.
Contact:
Carlo Dall Anese
9032 NW 12th Street
Doral, Florida 33172
Posted: 6 April 2008
Wanted: Bally Apron & Shooter cover for Eight Ball Deluxe- Yellow and White apron. Needs to be a 9+ condition. Please send picture and price.
Contact:
John Janitor
Posted: 6 April 2008
I need the 1"X 3" purple plastic next to the left flipper button on my Batman Forever machine.
Contact:
Dave
E.prov, R.I. USA
Posted: 5 April 2008
Looking for a complete head with a nice glass for a 1961 Williams Reserve.
Contact:
Darryl Anderson
Richfield, MN
Posted: 5 April 2008
Need lower apron for Gottlieb World Fair. Should be in very good condition.
Contact:
Steve
voice: 253-709-7521
Posted: 5 April 2008
1962 Williams '3 Coin' backglass - looking for BG in good or better condition. Please email with description of glass' condition, your location, pics of both sides of glass if possible, along with asking price. Will pick-up if within 1-2 hrs of Ottawa, Ontario, Canada, otherwise will need proper insured packaging/shipping for safe arrival of the glass in one piece.
Contact:
Sylvain
Ottawa, Ontario Canada
Posted: 4 April 2008
1975 Bally Wizard Backglass, Good to average condition.
Contact:
Christopher Quick
Atlanta, GA
Posted: 4 April 2008
1976 Bally Night Rider EM, need 2nd coin relay setup (the whole unit).
Contact:
Tim
voice: 417-850-6511
Posted: 4 April 2008
1978 Bally Playboy bumper caps must be in very good condition ie: no burn holes or marks.
Contact:
Jim Webeck
Posted: 4 April 2008
Looking to buy a left side slingshot plastic for a 1980 Williams Black Knight, But will also buy both sides. NOS/repro, good used, let me know.
Also looking for speech EPROM for a Black Hole machine or an entire sound board you know works with the speech. Also looking for the spinner backbox motor for the disk- WORKING.
Please do not contact me if to tell me you have something, then when I email back to purchase or inquire, you don't even respond or you change your mind and won't sell. This has happened with Black Hole speech and a backbox motor. I'm looking for a hassle free easy transaction, just frustrated with the lack of communication.
Contact:
James
MA
Posted: 4 April 2008
Need a backglass for Grand Lizard, the production glass with all the displays grouped together. Doesn't have to be perfect.
Contact:
Al Ellis
voice: 770-973-7720
Marietta, Georgia 30062
Posted: 4 April 2008
1980 Bally Nitro Groundshaker. I need the upper arch plastics left and right.
Contact:
John
NJ
Posted: 3 April 2008
Looking for Nine Ball Playfield. Playfield, any condition, Need plastics and also the Spot # Target when lit Cap. BG also
Any help appreciated.
Contact:
Scott Martin
3103 Foxboro Dr
Richardson, TX 75082
Posted: 3 April 2008
Wanted, Gottlieb lower playfield apron (score card holder). Early 60's style with the cutout showing the balls and the girls wearing shorts, Looking for a nice one with no rust.
Contact:
Homer Stevens
voice: 989-689-5159
Hope, MI. 48628
Posted: 3 April 2008
Wish to buy 1950 to 1955 Gottlieb woodrail bare cabinet and head in decent condition (paint doesn't matter). I have an excellent condition, original paint 1960 Gottlieb Spot A Card cabinet/head as possible trade.
Contact:
Rob
Posted: 3 April 2008
1966 Chicago Coin Corvette ball bowler plastic pins wanted. These are pins that are 10 inches tall, and have mounting screw spacing of approximately 1 7/16" from center to center of the holes. Spacing of 1 7/8" will NOT work for my application. The pins I seek must not have any cracks. I will consider a COMPLETE set of pins that are numbered from 1-10, but the set must be complete. Otherwise, the pins that are original to the machine have 2 small stripes at the neck, and the logo of a 'CC' inside of a shield on the mid section. Let me know what you have. Pictures would be extremely helpful.
Contact:
Scott Bilot
2433 S. 61st Street
West Allis, Wisconsin 53219
Posted: 2 April 2008
1973 Gottlieb Jumping Jack backglass, 2 player.
Contact:
Rick
voice: 609-392-7699
772 Mayflower Avenue
Lawrenceville, NJ 08648
Posted: 2 April 2008
1974 Gottlieb Far Out or Out of Sight Instruction card. Looking for anyone who has an original or if someone could send me a scan via email.
Contact:
Mykal
voice: 760-402-9682
CA
Posted: 2 April 2008
Star Wars Episode 1 Pinball 2000 working CPU with processor needed. Call with price.
Contact:
John Cassiday
voice: 408 835 8400
Lawndale, CA
Posted: 2 April 2008
Stern Nineball: I need the rollunder spinner bracket
Gottlieb Spirit: Looking for a complete playfield.
Contact:
Tim
Chicago, IL
Posted: 2 April 2008
Looking for a Raven pinball translite poster.
Contact:
Douglas Thompson
voice: 727)481-9272
1600 35th St N
St Petersburg, Florida 33713
Posted: 2 April 2008
Bally KISS parts, any condition considered, required to re-build an existing machine. I'm in Ontario.
Contact:
Steve
Ontario
Posted: 1 April 2008
Needed 7 card drop target bank for a 1973 Gottlieb Hot Shot, preferrebly a complete bank, plastics also if anyone has them, the bank is not restricted to said game above, any 7 card bank from a Gottlieb EM will do, has to be in good condition though, Please e-mail if you can help.
Contact:
Terry Murphy
voice: 708-371-7413
Posted: 1 April 2008
Looking for an original Bally speaker for a KISS pinball machine. It must be in excellent shape and reasonably priced.
Contact:
Steve Deangelis
voice: 905-374-3642
7528 Vivian CT.
Niagara Falls, On L2h 2j6
Posted: 31 March 2008
Still want an Addams Family pinball playfield, please help. I will require pictures and seller must be able to ship to UK, cash waitin.
Contact:
Glyn Davies
Posted: 31 March 2008
Want to buy ramp in good condition for Checkpoint pinball machine.
Contact:
Jason Butterworth
Bc Canada
Posted: 31 March 2008
Looking for plastics for a 1977 Gottlieb Jet Spin game.
Contact:
Eric Tonghini
147 Foxwood Road
Stamford, CT 06903
Posted: 30 March 2008
Midway Wild Kingdom (EM gun game) - I need the animal leaper targets & assembly for the rear of the machine. I may be able to use parts from similar Midway games, so please contact me.
Chicago Coin Night Bomber (EM Gun Game) - I am looking for a complete game or a parts game. Specifically I need the gun assy that the yoke controls & the mirror.
Midway EM Wall Games: Dart Champ, Table Tennis, Golf Champ - I need the controllers (either remote or hard wired) and a coin box. I believe these are the same for all of Midway's wall games.
Contact:
Armistead Saffer
Aylett, VA
Posted: 30 March 2008
Plastics for Solar City.
Contact:
Douglas Muck
voice: 217-732-8229
17 Pebble Beach Drive
Lincoln, IL 62656
Posted: 30 March 2008
Looking for mini-playfields for several pinball projects. The playfields need to be populated (or almost so), and have little to no wear. If a pop bumper or flipper is missing that is fine, but I would like drop target assemblies to be fully present and intact.
What I need is:
1) Black Hole: Lower Playfield
2) Haunted House: Lower Playfield
3) Elektra: Lower Playfield
4) Pharaoh: Upper Playfield
5) Solar Fire: Upper Playfield.
6) Family Guy: Stewie Playfield.
Price given will be based on completeness and condition.
Contact:
Geo
Posted: 29 March 2008
Wanted: Williams High Speed Backglass. If you have one, please call Steve at 410-889-6902.
Contact:
Steve Sachs
voice: 410-889-6902
P.o. Box 114
Stevenson, MD 21153
Posted: 29 March 2008
1979 Fascination. Eros One drop pin part #264-2-12 & solenoid plunger part # 264-5-43 & solenoid plunger part #264-2-24.
Contact:
Patrick Curtin
voice: 301-881-4859
608 Rollins Ave.
Rockville, Maryland 20852-4112
Posted: 28 March 2008
Backglass for a 1951 Bally Coney Island bingo and a head and body cabinet.
Contact:
Bob Brague
voice: (570)506-3141
2508 North Hills Drive
Williamsport, PA 17701
Posted: 28 March 2008
Bally Creature from the Black Lagoon needed:
Side cabinet art decal (top Left/claw)
Center plastic playfield window (new/never used. Repo ok)
Contact:
Sage James Spirtos
West Los Angeles, CA
Posted: 28 March 2008
Want Bally Deluxe Fun Cruise (1965) backglass or entire machine in excellent condition. Also looking for Bally GAY CRUISE (1965) backglass and/or entire machine.
Contact:
Randy
Long Beach, CA
Posted: 28 March 2008
Looking for playfield plastics for the following games
Williams Tic Tac Toe (1959)
Gottlieb Wagon Train (mainly the left and right kickers)
Gottlieb Flipper Fair
Looking for playfield for
Ship-Ahoy Gottlieb
looking for the following bakglasses
Neptune Gottlieb
Flipper Fair Gottlieb
Flipper Clown Gottlieb
Tic Tac Toe Williams 1959
Squarehead Gottlieb
Contact:
Roger
voice: 203-268-9936
39 Beech St
Trumbull, CT 06611
Posted: 28 March 2008
1958 Gottlieb Roto Pool Pop Bumpers (4) wanted
Also, 1953 Gottlieb Guys and Dolls coin receiver part wanted.
Contact:
Randy Galati
voice: 6182350179
205 St. Sabre
Swansea, Illinois 62226
Posted: 27 March 2008
1970 Bally Sea Ray backglass, must be mint.
Contact:
James Sullivan
voice: 703-447-1423
Arlington, Virginia
Posted: 27 March 2008
Looking for a backglass and rear door for a 1948 Gottlieb Round Up.
Contact:
Alan Leroy
voice: 410-404-2244
Jarrettsville, MD 21084
Posted: 27 March 2008
Sega Combat EM arcade backglass, any condition considered.
Contact:
Tony Mather
Posted: 27 March 2008
1969 Williams Seven Up, Looking for:
1. Playfield
2. Rollovers on Playfield
3. Plastics
I could use the yellow drop targets at the top as well.
Please help me bring this old thing back to life.
Contact:
Steve Campbell
Norman, Oklahoma 73072
Posted: 26 March 2008
Star Trek The Next Generation (STTNG) 'Targets Increase Spinner Value' plastic in Excellent or better condition. It's locate