Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Welcome to the largest and oldest Pinball Parts Wanted page on the
Internet. All entries are sorted in order by date of post, with most recent
listed first.
If you need hard-to-find parts fill out
this form and your entry will be added to this page. This is completely FREE!
1981 Bally Embryon NOS playfield. Please let me know if you have a NOS one for sale. Will pay well according to condition (e.g. higher price if not warped, planked, etc.)
Contact:
Jim Heck
Chelmsford, MA 01824
Posted: 5 July 2009
1981 Williams Jungle Lord Backglass in nice condition
-1969 Bally Bowl-o Backglass in nice condition
Contact:
Blaine Jenkins
voice: 540-722-4203
440 Rocky Ford Road
Clearbrook, VA USA
Posted: 5 July 2009
1987 Bally Dungeons & Dragons apron and playfield decals, topper, and side rails
Contact:
Tracy Larue
Posted: 5 July 2009
Harbor Lites backglass needed! Spelled it wrong last time. Hope someone out there has a second one to help me out with. Destroyed mine accidently!
Contact:
Robert
Posted: 5 July 2009
I recently started restoring a well used Teed off. It is missing the gopher topper, base and motor assembly. Deciding if I should put more money into the game by adding the missing topper. So does anyone have a spare? What condition is it in? What are you asking for it? Any pics? Any leads?
Contact:
Ike
Posted: 5 July 2009
Help, backglasses are flaking bad. In need of NOS or Excellent Condition w/ no wear through or/in artwork.
Needed:
1. Bally 1965 Bandwagon
2. Gottlieb Solar Ride
Contact:
Carl
Mcdonough, GA 30252
Posted: 5 July 2009
Stern Hot Hand
I need a complete power supply for this game. I'm not looking to do any soldering. I was hoping to get a working one, that I can just plug in.
Contact:
Phil
voice: 971-563-2625
Vancouver, WA 98661
Posted: 5 July 2009
I'm looking for two 7 digit displays for SORCERER by Williams
Contact:
Mark
voice: 248 380 0228
Michigan 48167
Posted: 5 July 2009
1974 Williams Dealer's Choice backglass
Contact:
Pierre Ganty
Posted: 4 July 2009
Wanted: Prototype translite for Data East Tommy. I have parts to trade or cash. Please email any leads.
Contact:
Mike
PA
Posted: 4 July 2009
1952 Williams 4 Corners, 2 playboard inserts, 2 inches round.
#1 All rollover channels 500,000 when lit.
#2 special when lit.
Looking for inserts in fairly decent condition, OK if somewhat beveled.
Contact:
Rick
voice: 609-392-7699
Lawrenceville, NJ
Posted: 3 July 2009
1995 Williams Jackbot plastics set wanted--NOS or Repro.
I'm looking for a plastics set for Jackbot. I already have the slingshots, but I'll anything else, preferably in a set. I'll take either NOS or reproduction sets, it doesn't matter to me as long as they look nice and aren't cracked or damaged.
I would also consider taking a used set as long as they aren't faded or cracked.
Contact:
Jeff
Centerville, Utah 84014
Posted: 3 July 2009
Bally Skill Roll flipper units or handles and a coin door. Will consider an entire game for purchase also.
Contact:
Scott
Dallas, Texas
Posted: 3 July 2009
Blackbelt, Tradewinds, or Karate Fight backglass; Solar City or Target Alpha (5 targets) Playfield plastic; any Williams Tradewinds Parts.
Contact:
Chuck Shade
So. Wmspt., PA 17702
Posted: 3 July 2009
Looking for a Backglass for the 1978 Bally Playboy. Call George at (772) 532-9979, or email at georgeshelton@ymail.com.
Contact:
George Shelton
voice: (772) 532-9979
131 10th Ave.
Vero Beach, Florida 32962
Posted: 3 July 2009
Looking for DE Tommy Plastics. Except for slingshots
Contact:
Jason Lefort
voice: 864-704-4830
Greenville, SC 29607
Posted: 3 July 2009
Wanted: Cyclone ramp (not the Comet ramp) for 1988 Williams Cyclone. If you have any other Cyclone parts, would be interested. Replies from the USA only!
Contact:
Gary
Elmwood Park, NJ
Posted: 3 July 2009
1969 Chicago Coin Moon Shot or Astronaut.
I'm looking for one in nice condition both in looks and play.
Contact:
David
voice: 408 455 5708
San Jose, CA 95117
Posted: 2 July 2009
I am after LH (M1330 142 5) and RH (M1330 142 7) slingshot plastics or complete set preferably in excellent condition for Ballys '1978 Power Play', complete set also preferably in excellent condition for Bally's '1979 Supersonic', and lastly the centre 4 DT plastic (13A 117 5) or even better a complete set and you guessed it also preferably in excellent condition for 'Stern's 1980 Quicksilver'.
Contact:
Richie
Victoria Australia
Posted: 2 July 2009
1989 Williams Earthshaker. Looking for the Display/Speaker panel assembly. Specifically the plastic cover for the assembly. Must be in good shape without scratches over the scoring display. Williams part # 31-1420-568 from assembly # D-12518.
Contact:
Nick Utley
voice: 408 736-7188
10521 Madera Drive
Cupertino, CA 95014
Posted: 1 July 2009
I am looking for a Comet main ramp. I acquired a machine in horrible shape and got it all back to working shape. But the machine had some major heat damage, and the main plastic ramp is warped. If anyone has an old ramp I would be interested in it. I need it for basic shape as the ramp I have is 100% but out of shape. Let me know.
Contact:
Joe
Gilbert, AZ 85297
Posted: 1 July 2009
Judge Dredd Plastics: I am looking for:
-Crane Cover
-The 'Meltdown' Plastic which covers those 3 permanently locked balls on the playfield
-Eagle Topper and/or Topper Bracket
Nos or Used is OK as long as no cracks or chips.
Contact:
Charles
Los Angeles, CA
Posted: 1 July 2009
Looking to buy a backglass for a 1969 Sega Missile backglass. Can supply US shipping address if this helps.
Contact:
Derek
Posted: 1 July 2009
Williams Crusader:
Need: Award/Score cards and manual (I have a schematic)
Need: Name S/U unit.
Contact:
Ira Wexler
Owings Mills, MD United States
Posted: 1 July 2009
Would like to buy 2 pop bumper targets for Fathom. Also the cave trap plastic and the top left and bottom left plastics that are right next to the wood.
Contact:
Steve
Windsor, Ontario Canada
Posted: 1 July 2009
Backglass for a Williams Ten Spot, must be able to send photos of both the front and back of the glass.
Contact:
Ron Webb
voice: 732-349-6572
36 Seaton Road
Toms River, NJ 08755
Posted: 30 June 2009
Harbor lights backglass needed.
Contact:
Robert
Posted: 30 June 2009
Looking for a service support bracket on a 1993 Williams Indiana Jones: The Pinball Adventure. The part # in the manual is 01-11781. It is possible that one from another machine would work. It has a hole on each end to mount on a screw and nut under the playfield. The 2 holes are around 12 3/4" apart and the tallest part of the bracket is 7 1/2".
Contact:
Greg Bitz
Posted: 30 June 2009
I'm looking for a set of flipper assemblies that could replace the two from a 1964 Bally Grand Tour. These 1964 units are original with machine (Bally Grand Tour) but the metal bushings come loose. I've had bushings made, they came loose too. I'm looking for a newer, workable replacement.
Contact:
Fred Martin
Portland, Maine
Posted: 30 June 2009
I'm looking for a working Stern I/O power driver board 520-5136-00 Rev.F or equal for a Sharkey's Shootout.
Contact:
Bob Cunningham
voice: 7729781332
699 8th Court
Vero Beach, Florida 32962
Posted: 30 June 2009
Judge Dredd Plastics Wanted
NOS or Used is ok just as long as there are no cracks or chips.
I'm looking for JD:
-Crane Cover
-Eagle Topper
-The 'Meltdown' Plastic which covers those 3 permanently locked balls on the playfield
-Slingshot plastics (NOS or used originals) would prefer them not to be repros unless repro color and detail is EXACTLY like originals.
Contact:
Charles4400
Los Angeles, CA
Posted: 30 June 2009
Looking for a really nice condition Quicksilver playfield, populated prefered but stripped ok.
Contact:
Mike Keith
Malibu, CA 90265
Posted: 30 June 2009
Looking for backglass for FIREPOWER II
Contact:
Allen
voice: 937-254-2590
OH
Posted: 30 June 2009
Wanted MPU test card for Bally TE-635-2 MPU tester. This card connects to the top connector of the -35 mpu & the tester.Any information, schematic or pics would help. I could copy the test card if I had one.
Contact:
Dave
Mission, Bc Canada
Posted: 30 June 2009
Fire! sling plastics, both sides.
Contact:
Brad Grant
Posted: 29 June 2009
Looking for CPU board system 80b for my Gottlieb Genesis. Must be fully working 100%. Must have a photo of the board.
Looking for 2 ramps as well.
I do not send Western Union so do not ask I pay all my stuff with money order or PayPal.
Contact:
Mike L
Timmins, Ontario
Posted: 29 June 2009
Looking for a pair of Demolition Man gun handles - complete assemblies with inside parts.
Also need Creature from the Black Lagoon speaker panel plastic cover with graphics.
Contact:
Jeffs
Posted: 29 June 2009
Apollo 13 - Looking for the abort handle/ball launch assembly for a Sega - Apollo 13 game. New or used, but working. Sega assembly part # - 500-6046-00-44 or the unique parts of the assembly too.
Contact:
Captkirk
3 Cook Road
Branchville, NJ 07826
Posted: 28 June 2009
I need to find instruction and score cards for a 1973 Gottlieb King Pin. If you have the instruction card only that would be great. I would love to have a copy for my newly finished game. Much appreciated.
Contact:
Randy Kluber
Posted: 28 June 2009
Looking for a signed 'Pat Lawlor' Twilight Zone apron. Ask for John or Craig.
Contact:
John Clements
voice: 919-859-2321
Posted: 28 June 2009
Looking for Parts or Machines for the following:
1982 Bally Speak Easy
1981 Bally Centaur
1979 Bally Kiss
Please email me pics and asking price.
Contact:
Steve Hubbard
Mechanicsville, VA 23111
Posted: 28 June 2009
1965 Gottlieb Buckaroo apron wanted.
Looking for a good looking apron for a Buckaroo machine. Does not need to be NOS, of course.
Contact:
Rick
Posted: 27 June 2009
Looking for a schematic for a Chicago Coin Pistol Arcade game. If anyone has one or knows where one can be found I would greatly appreciate contacting me.
Contact:
Bert Oppenheim
voice: 508 320-9725
Medway, MA 02053
Posted: 27 June 2009
I need a transformer, part# B-17921, for a Gottlieb Countdown pinball machine. I also need the yellow targets.
Contact:
Angelo Bonacci
voice: 402-345-0230
2601 Mason Street
Omaha, Nebraska 68105
Posted: 27 June 2009
Looking for a coin box for my March 1976 Gottlieb "Sure Shot" machine. The door configuration is a bit funky, in that the coin box handle should be a bit lower that the stndard early 70s Gottlieb boxes. If you think you've got a match, please send me a photo at Candr2112@aol.com [
Contact:
Chris Andrews
Michigan
Posted: 27 June 2009
Wanted Fort Lock double bitted keys. Can be blank or used cut keys any and all key numbers. I don't need the locks. If you have old Fort Lock keys laying around I could use them.
Contact:
Rick Pittman
Posted: 27 June 2009
Wanted WPC Transformer please send picture along with what you want for it. Will also take wiring from the plug to the on off switch box.
Contact:
Rudy
Port Saint Lucie, Florida
Posted: 27 June 2009
WTB: 1957 Williams DeLuxe Official Baseball need base runners and cardboard spectators. Is anyone reproducing these parts?
Contact:
Mark Hartman
9 Silver Lm
St Louis, MO 63122
Posted: 27 June 2009
1967 Bally Rocket III (pinball machine) backglass
Contact:
Timothy Benko
Po Box 216
South Plainfield, NJ 07080
Posted: 26 June 2009
1986, Gottlieb Mario Andretti, plastic ball tunnel to kicker ball solenoid.
Contact:
Tim C
Bainbridge Island, WA 98110
Posted: 26 June 2009
1991 Williams Terminator 2 Playfield
Still looking for a replacement playfield for the above game in my collection. Something NOS or gently used that would require minor touch-ups and clearcoat. Appreciate any leads or help, I really want to make this game special for my son.
Contact:
Jim Crismale
Posted: 26 June 2009
I need the small shooter rod for a Gottlieb Buckaroo. This is the smaller rod that pushes the ball up to the shooter lane.
Contact:
Nick
Posted: 26 June 2009
Late Gottlieb 1960's lockdown bar - need not be mint!
Contact:
Kipp
Posted: 26 June 2009
Looking for a working power transformer for Tales of the Arabian Nights. 5610-14515-01 xfmer-WPC wide mount
Anyone out there with a spare or parting out their machine? Let me know, $$$.
Contact:
Kevin Sciortino
voice: 954-682-6471
Posted: 26 June 2009
Coin tray to catch the quarters. I have a 1974 Top Card by Gottlieb
Contact:
Dan
Murrieta, CA
Posted: 25 June 2009
Looking for parts for 1993 Indiana Jones pinball
- biplane assembly including brackets and light boards
- fighter plane
- plastic set
Also looking for spare parts for some of my other machines
CFTBL, Getaway, Flintstones, Starship, Judge Dredd, Roadshow, STTNG, Hook, Checkpoint, F-14, TZ, you can email me with any parts you may have or call me.
Contact:
David
voice: 519-809-0650
Posted: 25 June 2009
1987 Williams F-14 Tomcat. Looking for the wiring harnesses for the machine
Contact:
Joe
Posted: 24 June 2009
Gottlieb '76 Royal Flush playfield, worn playfield OK.
Just looking for something reasonably flat and straight without water damage. Paint wear is OK, need not have parts on top or bottom either.
Contact:
Jody Lobert
voice: 724-494-4530
Gibsonia, PA 15044
Posted: 24 June 2009
In need of the head locking mechanism for a Big Game pinball by Stern. It's the bar that goes across the inside top of head with associated hardware.
Contact:
John Clements
voice: 919-859-2321 or 919-255-0789
Raleigh, NC 27606
Posted: 24 June 2009
1957 Gottlieb 'Flagship' Need upper playfield plastic
Contact:
Mike Barrett
Beavercreek, Ohio
Posted: 23 June 2009
I am looking for an unbroken ramp from a Space Shuttle.
Also looking for a set of glowing bones for Scared Stiff.
Contact:
Hugh McCreight
Posted: 23 June 2009
Looking for a nice '70 Williams coin door with the white and red
Williams Logo in the middle of the 2 coin shute. Please send pic.
Contact:
Charles Leblanc
Sherbrooke, Quebec Canada
Posted: 23 June 2009
Looking for excellent condition Harlem Globetrotters (HG) Pinball Backglass.
Contact:
Steve
Mechanicsville, VA 23111
Posted: 23 June 2009
Sega EM Manuals
Looking for the following SEGA EM manuals. Would also be interested in any other paperwork (invoices, service bulletins, flyers, etc.) for the SEGA EM games (1966-1976)
Sega Dodgem Crazy manual
Sega Derby Day manual
Sega Five StarQ manual
Sega Jumbo manual
Sega Invaders manual
Sega Jockey Club manual
Sega Ascot manual
Any other other Sega EM service bulletins, old invoices, etc
Contact:
Derek
Posted: 23 June 2009
1961 GTB Flipper Parade, I am looking for the launch assembly on the upper scoring section for my Flipper Parade. I need the bracket. Used is fine, part or the whole assemble will be fine. Private owner.
Contact:
Joe Minoski
Posted: 22 June 2009
TAXI SPINOUT RAMP. New preferred, but used and in good shape OK too. Will even consider with some cracks or breaks. (Mine is very bad. need something better). Send pic or description and price.
Contact:
Bruce
Posted: 22 June 2009
Bally Skateball (1980)
Need the playfield plastic that covers the center bank of three drop targets.
Need ball gate assembly ASE-2250-60 (gate that separates the out and return lanes at the lower left of the play field).
Contact:
John
Posted: 22 June 2009
1934 Gottlieb "FLYING TRAPEZE" need:
4 legs single bolt.
Ball lift assmbly
coin chute
Contact:
Ken Carroll
Posted: 21 June 2009
Looking for a playfield for a Bally Eight Ball Deluxe. Any condition.
Contact:
Steve
Florida
Posted: 21 June 2009
Stern Star Gazer playfield, any condition.
Stargazer pop bumper caps in decent condition.
Will pay top dollar.
Contact:
Rush
Woodridge, Illinois
Posted: 21 June 2009
1980 Williams Firepower Backglass wanted. Happy to pay all shipping costs. Will consider all conditions.
Contact:
Andrew Mathews
Posted: 20 June 2009
I'm after a Williams 1979 Flash playfield only. Looking for just the playfield but if the field has the mechanics on it I will take it as is. Looking for a playfield which is a 7 out of 10 or higher. I am in the restoration bussiness and need a quick respone time on this part. Please call me ASAP and ask for Clayton.
Contact:
Clayton Thibert
voice: 519-981-3488
3645 St Patrick's Dr
Windsor, Ontario N9E 3H6 Canada
Posted: 20 June 2009
I need a 1988 Williams Taxi topper. Also need the light board that mounts under it.
Contact:
Jeff
voice: 314-413-0513
10561 Litz Ave
St Ann, Missouri 63074
Posted: 20 June 2009
Looking for Demolition Man plastics set. Complete or partial.
Contact:
Alan
Posted: 20 June 2009
Wanted: Above average 1977 Bally Eight Ball playfield
Contact:
JP Jackson
Posted: 20 June 2009
I am looking to purchase a 1960 Gottlieb Flipper playfield. A playfield in any condition is worth discussing, but the better the condition, the more I am willing to pay.
Contact:
Mark Niemkiewicz
Allentown, PA
Posted: 19 June 2009
Bally Paragon pinball machine 1979 NEED MPU board light corrosion repairman \OR new board
Contact:
Marion Sampson
115 Lake St
Auburn, Me 04210
Posted: 18 June 2009
Looking for an NOS or excellent condition "Marilyn" translite for my Taxi.
Contact:
Mike
Posted: 18 June 2009
Need center plastic B-16411 and kicker a-16414-L for Lucky Hand-Jacks open.
Kicker Plastics also for Vagabond.
Contact:
Al Johnson
WI.
Posted: 18 June 2009
Looking for an Eight Ball Champ playfield plastic set in decent condition (still actually, these seem difficult to come by)
Have a Williams Space Shuttle playfield in so so condition I'm parting out for trade? Let me know if youd be interested in something like this. Has all coils, wiring and apron, some plastics missing but the ones here are in relatively ok state. Ramps are good. Shuttle is there but it has some stickerdamage and looks like it spent most of its life in a nicotine heavy environment. If that doesn't work for you, please quote me a price for the plastics.
Contact:
Jorgen
625 Joann
Somerville, TN 38068
Posted: 17 June 2009
Looking for the round legs that go on the Williams 'shelf-style' games. Such as, Jungle, Darts, Highways, BoBo, etc. Single legs or complete sets needed. Will take any or all...
Contact:
Glen Peters
voice: (909) 622-1637
So. CA.
Posted: 17 June 2009
I have a Cosmos 825 that is working.
However, the backglass is cracked.
Does anyone know where I can get a replacement glass & decal?
Contact:
Stanley Berman
Posted: 16 June 2009
Stern Dracula, looking for a playfield in nice condition, and may be interested in other parts as well.
Contact:
James
Portland, Ont. Canada
Posted: 16 June 2009
1978 Bally Harlem Globetrotters pinball machine backglass.
Contact:
Jackie
Posted: 15 June 2009
Looking for a really nice Bally Cybernaut complete, working or not working ok, Or just a really nice playfield.
Contact:
Chuck Sanderson
voice: 314-280-9299
IL
Posted: 15 June 2009
Need a rebound board for a Williams Alpha puck bowler.
Contact:
Bob Graham
Columbia, TN 38401
Posted: 14 June 2009
Backglass for 1972 WMS Olympic Hockey.
Contact:
Bill Gill
voice: 601.832.5619
Edwards, MS
Posted: 13 June 2009
I need a playfield plastic set for a 1972 Gottlieb JUNGLE. I need the complete set, but will take individual pieces.
Contact:
Larry Graese
voice: 7274187468
11610 Murray Ave
Largo, FL 33778
Posted: 13 June 2009
Looking for:
Williams, playfield apron for Tales of The Arabian Nights
Williams TERMINATOR 2 plastic set, full or partial
Contact:
Jan
voice: 207-432-1482
Posted: 13 June 2009
Looking for right and left flipper buttons for a Revenge From Mars.
Contact:
John Farmer
voice: 901-433-0891
4539 Winchester Suite 16
Memphis, TN 38118
Posted: 13 June 2009
Desperately need 2 Merkle Korff Flexo-Action motors (they have the round gearcase). They are from the 1930-50s. Both are 25 volt and one is 4.6 rpm and the other is 20 rpm. I'll pay at least $100 each for these, so please check and se if you can help me.
Contact:
Jim Anderson
Posted: 13 June 2009
1947 United Havana: I need a backglass.
Contact:
Bob
Posted: 12 June 2009
1950 United Shuffle Alley: need a front and some of the shorter pins for a 1953 Super Shuffle Alley or any that will fit this game.
Contact:
Bob
Posted: 12 June 2009
1964 Williams Heat Wave backglass looking for one of the reproductions
Contact:
Pete Cooley
Huntington Beach, CA
Posted: 12 June 2009
Game Plan cocktail pin Fan-Blower unit or any other Fan-Blower unit that will work in my Game Plan Star Trip. Also looking for a Game Plan chime unit. Let me know what you got.
Contact:
Eric Jaeger
voice: (808) 987-5247
25011 Frampton Ave. #6
Harbor City, CA 90710
Posted: 12 June 2009
Looking for a NOS or a used Stargate Playfield in excellent or better condition.
Contact:
Mark Pegram
voice: 513-759-0396
5892 Franklin Trail
Hamilton, Ohio 45011
Posted: 12 June 2009
Need plastics for Hollywood CC. need plastics for drop a card gtb. have plastics for OXO Wms for sale, and Kick Off Bly. Also need a hold down bar for Drop A Card gtb and Flip A Card Gtb.
Contact:
Mike Rimkus
voice: 814 673 2303
Polk, PA 16342
Posted: 12 June 2009
Need some playfield parts from older UNITED pinballs from 1948-1950 need bumper caps that say BONUS any color o.k also parts from CAROLINA, COUNTY FAIR, MADAM BUTTERFLY, SUMMERTIME, BLUE SKIES. Also a front door from any 1948-1950 game. If you can help please let me know.
Contact:
Bob
Posted: 12 June 2009
1968 Gottlieb Domino. Need a lockdown bar, as mine was missing when I bought the game. Need not be mint, but not JUNK either. Will consider a bar with endcaps, or the smooth striaght style, like on a Gottlieb Dimension. Email me with what you have, and a picture if possible. Must be able to ship to my Milwaukee, WI shipping address.
Contact:
Scott Bilot
2433 S. 61st Street
West Allis, Wisconsin 53219 United States
Posted: 11 June 2009
1990 Bally Game Show Looking for an NOS or good used Bally Game Show playfield. Would also be interested in NOS plastics. Email with what you have and an asking price.
Contact:
Tim Maleck
Austin, TX
Posted: 11 June 2009
Looking for parts for my Midway Dog Fight. Sound Board Gun parts Art work.
Contact:
Dan Moore
Hunter
Ottawa, Ontario
Posted: 11 June 2009
Wanted: Backglass / Head glass of for Big Game (1980 Stern)
Contact:
Kris Cornolo
voice: 612 816-3535
12651 Dupont Ave. So
Burnsville, MN United States
Posted: 11 June 2009
Want to buy a nice used or NOS Apron for my whirlwind
Contact:
Jon
Posted: 11 June 2009
1993, Jurassic Park. Looking for a light box topper.
Contact:
Steve
Jacksonville, FL 32259
Posted: 10 June 2009
1958 Gottlieb Brite Star schematics and plastics (only has a triangular one covering the roto target)
1958 Gottlieb Contest schematics and plastics (seven pieces)
Contact:
John Lescher
14 Fox Run
New Providence, NJ 07974
Posted: 9 June 2009
Gottlieb 1958 Picnic: Need backglass PLEASE!
Any paperwork anyone might have
Plastic's are needed as well
Please, any leads would be helpful!
Contact:
Steve Campbell
Posted: 9 June 2009
Looking for Gottlieb Genesis ramps. If you have these ramps email me how much you want for them.
Also looking for coils a-1496 for Gottlieb Premier.
Contact:
Mike Laforge
174 Pine Street North
Timmins, Ontario P4n6l1
Posted: 9 June 2009
Looking for a plastic set for 1977 Gottlieb Solar City plastic set in good or mint condition.
Contact:
Vinny
Ohio
Posted: 9 June 2009
Parts Needed for 1995 Bally Who Dunnit Pin. Any condition considered! Parts as follows:
Who Dunnit Pinball slot machine assembly
Security chip for Bally Who Dunnit
Dot Matrix Controller Board = A-14039.1
WPC Security CPU Board = A-17651-50044
Fliptronic II Board = A-15472
Power Driver Board = A-12697-4
Tony’s Palace Plastic
Who Dunnit Translite
Ideally would like to source from NZ or Australia or possibly US, depending on shipping!
Contact:
Duncan
voice: 006421443862
Christchurch New Zealand
Posted: 9 June 2009
Wanted: Gottlieb Miss Annabelle (1959) parts, playfield & backglass animation plastics, coin door with working coin accepter mechanism.
Contact:
Pinballphreak
Posted: 9 June 2009
Williams Friendship 7
Desperately need backglass and plastics, any help would be much appreciated.
Contact:
Steve Campbell
Posted: 9 June 2009
1985/86 Bally Motordome Sound Board
Contact:
Gary Kiehl
voice: 559 441-1111
1231 N Blackstone
Fresno, CA 93703
Posted: 8 June 2009
Looking for ONE plastic from TOTAN (Tales of the Arabian Nights).
It is large the one that sits above the lock switches, behind the lamp. I 'think' it may be known as the Harem plastic ( unsure). It is purple at the bottom, has the lady in the middle and is yellow on its upper left.
Contact:
Mark Watson
Australia
Posted: 8 June 2009
WANTED: 1988 Williams Taxi Spinout Ramp, Part R-12262. New or used in good condition (ramp with cracks or breaks will also be considered). Send picture, if possible, and price.
Contact:
Larry
Posted: 8 June 2009
1970 Williams 'JIVE TIME'
Looking for schematic and/or user manual. Original or not
Contact:
Stephane
Posted: 7 June 2009
1993, Jurassic Park. Need a complete, original service manual.
Contact:
Steve
Jacksonville, FL 32259
Posted: 6 June 2009
1984 Williams Space Shuttle
Want to Buy:
Space Shuttle 'toy' over ramp
Ramp assembly
Spinner
Contact:
Jim Boike
voice: 703.421.8504
Sterling, VA 20165
Posted: 5 June 2009
1989 Williams Bad Cats, I am after the wire gate at the bottom of the Tiger ramp adjacent to the drop targets.
Contact:
Paul
Sydney, N.s.w. Australia
Posted: 5 June 2009
I need a Heath Coin Shute assembly for a 1950's Gottlieb woodrail.
Contact:
Nick
Posted: 5 June 2009
Looking for 1970 Aquarius backglass. Help!
Contact:
Joe Steyskal
voice: 402-306-6231
3310 So 90th Ave
Omaha, NE 68124
Posted: 4 June 2009
1989 GTB Hot Shots ramp/chute assembly.
Looking for the ramp/chute assembly (part #26291), that goes in the upper right hand corner of a 1989 GTB Hot Shots that feeds into the spinning launch wheels. Don't need the plastic shield that goes over it, just the ramp. It's OK if it doesn't have the metal flap. Used good condition or NOS. If you've parted one out, please check and let me know.
Contact:
Alan Leroy
Jarrettsville, MD 21084
Posted: 3 June 2009
After a Indiana Jones playfield with minimal wear, can organize pickup from any State in the USA, missing coils, plastics etc is okay.
Email me with a price.
Contact:
Michael Shalhoub
Sydney Australia
Posted: 3 June 2009
Complete 10,000 point relay unit for a Gottlieb Sunshine 1958.
Have just rebuilt the entire game and the complete unit has been hacked out.
Contact:
Tony Mather
Posted: 3 June 2009
Looking for:
Spook House Ramp for Williams Cyclone
Gun Handle for Williams Terminatot 2
Tombstome Assy for Data East TFTC
Please shoot me a mail if you have any of the above parts for sale.
Contact:
Hagen
Posted: 3 June 2009
1959 Williams Pinch Hitter: Looking for a coil which may have been used on several different machines. The number is M34-3100. It says it's a lock relay. any other parts for this machine considered as well.
Contact:
Mike
Austin, Texas 78745
Posted: 2 June 2009
Looking for instruction cards for my Williams Short Stop baseball game and my Williams Zig Zag pinball machine. A copy is fine or originals would be graet.
Contact:
Sam
Posted: 2 June 2009
Wanted:
Alien Star backglass.
Contact:
Jason Rufer
Cokato, MN 55321
Posted: 1 June 2009
Wanted:
Plastic set for Gottlieb Sky Jump.
Plastic set for Gottlieb 2001.
Individuals or complete. Must be unbroken.
Contact:
Jason Rufer
Cokato, MN 55321
Posted: 1 June 2009
Wanted Evel Knievel pinball head unit without back glass. Or just the power-supply, number displays and all circuit boards. I live in Tampa Florida and my contact number is 813-240-6590.
Contact:
David Collins
11209 Donneymoor
Riverview, Fla 33569
Posted: 1 June 2009
Centaur: Need the small plastic standing over the right flipper.
Contact:
Claude Leblanc
voice: 418-204-2050
167 Ave Jacques Cartier
Donnacona, Quebec G3m 2b2
Posted: 30 May 2009
Looking for any/all parts for Who Dunnit. Any help is appreciated.
Contact:
Duncan Booth
Christchurch New Zealand
Posted: 30 May 2009
I am after a Bally Playboy playfield overlay for my slightly worn playfield, I have a second playfield which has been stripped and prepped and wanting a facelift, can someone help?
Contact:
Tont Tanti
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
Hi all, I am located in Melbourne, Australia and am looking for any Bally solid state pinball machines or parts you have for sale. I have almost finished a Bally Rolling Stones and am looking for a new project to start, any machine and in any condition will be considered, will pay a fair price.
Contact:
Tony Tanti
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
Looking for a replacement playfield for my 1979 Bally Harlem Globetrotters, must be of clean condition with no or little ware, will pay for all costs including shipping and handling fees.
Contact:
Tony
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
I am looking for playfield plastic for my Flying Carpet pinball machine. Please email me your selling price if you have the plastic of A-13579 & A-13582.
Contact:
Eddy
1427 Marigold
Upland, CA 91784
Posted: 29 May 2009
WANT TO BUY:
I am looking for a set of cone shaped metal legs for a french pinball machine made by Rally
Games that used these legs are:
Bowling Flipper, Sunday On Ice, Karting, Twist, Toro, Happy Papeete, Hockey Girl
Contact:
David Bauer
Posted: 28 May 2009
1981 Williams Jungle Lord - Looking for backglass in good condition (mine is flaking badly, like most I've seen) and also looking for some playfield plastics to replace some of mine that are cracked. Especially looking for the plastic covers the mini-playfield bagatelle.
Contact:
Bill
Downingtown, PA
Posted: 27 May 2009
Looking for Silverball Mania parts (plastics and playfield), Super Sonic Parts (playfield). Williams Bad Cats playfield and wishbone ramp, Mr and Mrs Pacman Bumper Caps. Let me know what you have available for these machines.
Contact:
Steve Orringer
voice: (919)965-8370
487 Herring Road
Princeton, NC 27569
Posted: 25 May 2009
Looking for lane and lane hardware for a 1971 United Seville Shuffle Alley. Must be in great condition with hardware a wires 100% intact.
Contact:
Kevin Richardson
voice: 310-357-7092
41 Cresta Verde Dr
Palos Verdes Peninsula, CA 90274
Posted: 25 May 2009
Would like to purchase a Williams Firepower / Fire Power back glass/ backglass.
If you have one in 'great shape' (a nick or two is O.K.). please contact Tom at 404-966-2051 to discuss pricing and terms for shipping to Marietta, GA (Atlanta), zip 30067.
Contact:
Tom Grizzard
voice: 404-966-2051
470 Timberlea Lake Dr SE
Marietta, GA 30067
Posted: 25 May 2009
I am looking for an unbroken left slingshot plastic for a Gottlieb Raven. I would also buy a good used set pf playfield plastics or a new old stock set of plastics for it.
I am looking for a nice playfield apron (yellow) for a Gottlieb Totem.
Contact:
Richard Strunks
Fort Smith, Arkansas
Posted: 24 May 2009
WANTED: I am looking for a United Hawaii bingo backglass.
Contact:
Alan
Posted: 24 May 2009
1994 Freddy: A Nightmare on Elm St. I need the plastic boiler that's in the upper right side of the playfield. Could also use a hand / claw due to broken blades.
Contact:
Mark
MI 49417
Posted: 23 May 2009
Bally parts catalog for the Centaur / Centaur II era.
Looking for a part numbers for Centaur II (1983) - coil sleeves, springs etc. Game manual does not list them.
Cheers
Graeme
Contact:
Graeme
Perth, Western Australia
Posted: 23 May 2009
I need (6) Williams displays for a Firepower and a Blackout. I also need (1) ball in play/credit display for either game above. I'm also in need of the same display for a Williams Sorcerer. Please call right away if you have these parts. I'm trying to get these 3 games finished and sold right away.
Contact:
Phil
voice: 971-563-2625
Vancouver, Washington
Posted: 23 May 2009
1988 Data East 'Time Machine'
Looking for:
Starwarp ramp assembly
slingshot plastics
lane guide plastics.
Contact:
Elliott Segelbaum
Posted: 22 May 2009
Can someone please help me with documentation to Gottlieb ICE-Revue.I need maintenence manual, and schematics. If some of you own a Ice-Revue I would very much like to get in contact with you.
Contact:
Tore Eilertsen
Posted: 22 May 2009
Looking for 2 Bally 6 digit diplays for my Kiss Pinball. Must be clean with no burns of course. Preferably something reasonably priced.
Contact:
Shawn Yuzik
Lloydminster, Ab Canada
Posted: 22 May 2009
Looking for a backglass (in very good condition or better) for a Williams Friendship 7 pinball machine. One of the Shay Group's reproduction Friendship 7 backglasses would be great as well.
Contact:
Mark
Rochester, NY
Posted: 22 May 2009
Looking for a Stellar Wars playfield to replace one in a working machine that is badly worn.
Contact:
Bill
Philly Suburbs, PA
Posted: 22 May 2009
Looking for playfield plastics for Volley, Space Mission, and Expressway.
Contact:
Ray Weaver
Wyomissing, PA
Posted: 22 May 2009
Looking for project machine. Paying Cash. Would like Williams. Any condition! Also looking for Williams Beat Time.
Contact:
Robert
Hazleton, PA 18201
Posted: 22 May 2009
Stern MPU100 era Pinball Apron.
Stingray, Lecronamo etc.
Contact:
Jeff
Posted: 22 May 2009
Wanted. A backglass for a 1960s Chicago Coin 'Criss Cross Pop Up'.
Contact:
Bob
voice: 570-506-3141
Williamsport, PA. 17701
Posted: 22 May 2009
We need the bell that sits on top of the 1987 Williams Fire pinball machine
Contact:
John
Nova Scotia Canada
Posted: 22 May 2009
Looking for 1968 Gottlieb Funland BACKGLASS in excellent/mint condition.
Contact:
Greg Theis
Davenport, IA
Posted: 21 May 2009
Looking for a backglass for a 1957 United Team Bowling Alley ball bowler.
Will consider buying it in any condition. TOP DOLLAR for one in mint condition!
I would only consider picking this up in person because of it's size. So with that said it will need to be within 500 miles of Quincy, IL.
Please send your price, condition, location along with a picture of front and back when replying to this ad.
Contact:
Dennis
Quincy, IL
Posted: 21 May 2009
Looking for a backglass for a Gottlieb Flying Carpet Pinball Machine.
Will consider buying it in any condition. TOP DOLLAR for one in mint condition!
I would only consider picking this up in person to avoid breakage during shipping. So with that said it will need to be within 300 miles of Quincy, IL.
Please send your price, condition, location along with a picture of front and back when replying to this ad.
Contact:
Dennis
Quincy, IL
Posted: 21 May 2009
Looking for a Black Knight 2000 plastic topper/marquee that goes on the top of the game. Let me know what you have and how much or perhaps we can work out a trade for some parts your looking for.
Contact:
John P. Dayhuff
voice: 269-979-3836
Battle Creek, MI
Posted: 21 May 2009
Looking for a KISS 1978 Bally backglass. I recently restored my pinball machine and now I am looking for a original or reproduction glass to upgrade the one that I have already.
My current glass is a solid 8.5 out of 10 so I am looking for better then that if possible. I know that Illinois Pinball has NOS stock but I thought that I would try here first in case someone is looking to sell their KISS backglass in excellent shape or better.
If you have this back glass or any leads that can help me in my search that would be apprecated too.
Contact:
Craig Van Buren
3909 Witmer Road
Niagara Falls, New York United States
Posted: 21 May 2009
Looking for nice condition 'Champion' backglass. This is a basketball pin made in 1949 by Chicago Coin. Hope someone has it.
Contact:
Gary
voice: 8609511869
Posted: 21 May 2009
Eight Ball Deluxe MPU board and Sound Board.
Contact:
Rick
Atlanta, GA 30319
Posted: 20 May 2009
Looking for 1979 Williams Stellar Wars play field (new old stock) or used in good shape.
Contact:
Duane
voice: 440 346 0477
Cleveland, Ohio 44146
Posted: 20 May 2009
1947 Chicago Coin Sea-Isle backglass. I like this game, playfield is really nice but it looks silly without the backglass. I hate to sell it off.
Contact:
Dan Burfield
Posted: 18 May 2009
Williams Space Odyssey backglass
Bally Zip-A-Doo lower right slingshot plastic. Will take entire set if necessary.
Backdoors for 1970s Williams 4-player games, 25-1/4"W by 27-3/4"H. I need two.
Contact:
Daina Pettit
voice: 801-277-6296
Salt Lake City, Utah 84117
Posted: 18 May 2009
1972 Bally Time Zone backglass. I've completely restored this machine, all except the backglass. I've exhausted my connections and I think Pacak doesn't have one either. If anyone has one or a lead on Bally backglasses, let me know.
Contact:
Dan Burfield
Posted: 18 May 2009
1980 Gottlieb "Time Line" Backglass, I have an ugly one and need a nice one. doesnt have to be perfect just nice.
Contact:
Paul
Otisville, NY
Posted: 18 May 2009
1998 WILLIAMS Swords of Fury pinball Playfield plastic wanted. will drive for local pickup or exchange for the ones I have. I'm looking to purchase a complete set or whatever is available, the most import part wanted is beneath the 2wire ramps on the right hand side.
Contact:
John
NJ 07054
Posted: 18 May 2009
Cirqus Voltaire playfield, any condition.
Contact:
Brian
Walled Lake, MI 48390
Posted: 18 May 2009
Original back door for a 1967 Gottlieb Wedgehead (King of Diamonds) Must be free of rust, dents and scratches. (Lock and key not needed)
Contact:
Bob Rentzer
voice: 818 521-5000
5011 Casa Drive
Tarzana, CA 91356
Posted: 18 May 2009
I am looking for the following three Star Wars Data East parts. Anyone know where I can order them?
Left Sling (storm trooper)
Lower Death Star Entry Right (Bobba Fett)
Jabba Bount
Contact:
Kelley O'brien
NC
Posted: 17 May 2009
Looking for a 1977 "Solar City" bottom cabinet with relay board and playfield. Within driving distance in NJ, PA, NY, MD. Somthing in restorable condition...I have a SC head ...need bottom cab.
Contact:
John
PA 18067
Posted: 17 May 2009
Wanted Complete Ball Loader and Balls for a Williams Hyperball
Contact:
Nick
935 Wales Ridge Road
Wales, Michigan 48027 USA
Posted: 17 May 2009
I am trying to repair a STERN Power Driver Board and I need the following two parts 22NE10L STP transistor and U-1 which is a 74HCT273 Can anyone help me find these?
Contact:
Max Phillips`
El Reno, OK
Posted: 16 May 2009
I need High Speed II: The Getaway parts.
Looking for the Accelerator board (Controls the supercharger magnets and is found under the playfield) and the optic board for the supercharger.
Contact:
Andrew
Logan, UT 84321
Posted: 16 May 2009
Need some playfield parts for some older United pinballs from 1947-1951 if you have a old parts game let me know what you have. Also need a front door for any and a backglass for 1947 Havana pinball.
Contact:
Bob
Posted: 16 May 2009
1992 Data East Star Wars translite.
Want an ORIGINAL translite for a DE SW. Must be factory original and NOT a reproduction. Preferrably NOS or excellent condition.
Would also be willing to do an exchange for a Repro translite + $ .If you're an operator who has a SW on site with a excellent translite this may be of interest to you.
Please send details and clear pics of BOTH sides of translite if interested.
Contact:
Scott
Nsw Australia
Posted: 15 May 2009
I need Parts for Old Coney Island (Platine MPU - 2)
Contact:
Herrnstein Thomas
voice: 0043/650/2307434
Eulenweg 3
Feldkirchen In Kärnten, Austria 9560
Posted: 15 May 2009
Looking for a nice Bally 1974-1975 Lower Apron with the dancing lady in the center and the yellow vertical stripe pattern. I need to replace one that is in poor condition.
The apron was used on the following games: Air Aces, Amigo, Bon Voyage, Boomerang, Delta Queen, Flicker, Knockout, Rogo, Sky Kings.
Contact:
Kory Hankin
Rockville, MD
Posted: 15 May 2009
WTB: backglass for '76 Gottlieb Surfer. Looking for 8/10 or better.
Contact:
Lee Wilk
voice: 410-461-6866
79 Bryans Mill Way
Catonsville, MD 21228
Posted: 15 May 2009
Indiana jones pinball part lower playfield idol assembly with optos. Don't need gold idol.
Contact:
Robert
Fla
Posted: 14 May 2009
Looking for new or used Black Hole upper playfield plastics, the big piece on the left side and the small triangular piece on left near the gravity tunnel entrance.
Contact:
David
Massachusetts
Posted: 14 May 2009
1966 Gottleib Dancing Lady backglass, fair to good condition.
Contact:
Len Pekor
3303 Hermar Court
Murrysville, PA 15668
Posted: 13 May 2009
1993 Bally Judge Dredd 'Pursuit' plastic light shield
Contact:
Keene Silfer
Posted: 12 May 2009
Looking for a Checkpoint playfield in good shape. Stripped prefered.
Contact:
Mike
2131 North Sheridan Dr.
Quincy, Illinois 62305
Posted: 12 May 2009
Looking for a used CPU board for a Paragon Bally machine as-2518-35. Dont really wanna spend the money on a new board (didnt pay too much more for the machine years ago) as I am not 100% sure this will fix it.
Contact:
Steve Bearden
806 Gordon St.
Longview, Texas
Posted: 12 May 2009
Gottlieb Jungle King backglass, must be 9.5/10 or better.
Contact:
Joe
Posted: 11 May 2009
Need the 2 cars for the spinner on the MARIO ANDRETTI pinball game, if you have one or both PLEASE contact me.
Contact:
S Hull
Ohio
Posted: 11 May 2009
Looking for lower cabinet, playfield, and relay board (complete bottom section) for a 1964 Gottlieb North Star. Playfield should be good to very good condition and complete. Ok if cabinet is less than good.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 11 May 2009
Looking for playfield for 1975 Gottlieb Pin-Up. Looking for very good to excellent condition (no paint loss). Missing parts is okay, but should not have badly hacked wiring.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 11 May 2009
Looking for some Bad Cats plastics.The left slingshot, shooter lane an the top plastic beside the right flipper with the writing on it.
Contact:
Tommy Harrison
Posted: 11 May 2009
Looking for the Gottlieb Asteroid Annie playfield which was at the Allentown show inside the hall entrance on Sunday. If you picked this playfield up, and would like to sell it, please contact me.
Otherwise, I'm looking for an Asteroid Annie playfield. Prefer one in nice usable condition. Playfield can be stripped, semi-populated, or fully populated.
Contact:
Jim P.
voice: 717-564-1032
Near Harrisburg, PA
Posted: 11 May 2009
Williams reverse wedgehead cabinet, excellent original shape only. Parts games are OK, or just the cabinet. Let me know.
Contact:
Joe
Posted: 11 May 2009
Ballt Time Zone. Looking for a Nice Backglass, little or no flaking and no fade.
Contact:
Rick
WI
Posted: 10 May 2009
I'm looking for a Terminator 2 plastics set. Preferably NOS or a quality reproduction. Will consider a used set if its in near-mint condition (minor warping, absolutely no cracks).
Contact:
Bill Deleo
CT
Posted: 10 May 2009
I need a flipper controller board for an Addams Family, this is the large board, not the opto board.
Contact:
Jay Olsen
voice: 316-214-7964
Wichita, KS
Posted: 10 May 2009
Looking for a Williams EXPO backglass (EM machine from 1969) in decent shape. Repro welcome.
Contact:
Kaspar Oberli
voice: +41765264276
Thun Switzerland
Posted: 10 May 2009
Looking for a Williams OXO backglass in decent shape. Repro welcome.
Contact:
Kaspar Obeli
voice: +41765264276
Thun Switzerland
Posted: 10 May 2009
Looking for the small center plastic on Aztec playfield.
Contact:
Rick
WI
Posted: 10 May 2009
WANTED - Bally Expressway paperwork - schematics, S/I Cards, etc. Also looking for clean - 25c coin door plastic inserts.
Contact:
Don Owen
Baltimore, MD 21737
Posted: 10 May 2009
1980 Zaccaria Star God (gen. 1)
- Looking for the following interconnect harness cables:
ribbon cable from CPU board to sound board and displays, ribbon cable that connects CPU to Driver, power harness from power supply to CPU
Contact:
Jim Nalaschi
Pittston, PA 18640
Posted: 9 May 2009
1995 Bally Attack from Mars backbox lighting behind translite
I know this is a long shot, but I need the white plastic part that holds the lights behind the translite. It's about 3'x 2' and is about 2 inches deep. Need the wiring harness that goes with it too. If you have a trashed AFM you're parting out, let me know.
Contact:
Ron Kral
voice: 703 478-0077
Reston, VA 20194
Posted: 9 May 2009
Williams pinball parts wanted for Travel Time or early 1970s games. Also looking for williams project machine.
Contact:
Robert
Walnut
Hazleton, PA 18201
Posted: 9 May 2009
1963 Gottlieb Slick Chick- looking for a lock down bar and upper and lower aprons in nice shape. Email with price.
Contact:
Tom Drum
Port Matilda, PA 16870
Posted: 8 May 2009
Looking for the instruction and/or score card(s) for a 1975 Gottlieb Super Soccer.
Contact:
Sam Jacobson
Posted: 8 May 2009
I'm looking for a Haunted House backbox with the light board and all the hardware. I don't need or want the circuit boards or backglass. I really need a decent physical and cosmetic specimen of the backbox to complete my partial HH, and will pay for crating, shipping, etc. up to my $300.00 limit. If you're interested, please send me some photos of what you have.
Contact:
Greg
California
Posted: 8 May 2009
I am after a Cosmic Cottage for a Party Zone. Drop me an email if you have one for sale.
Contact:
Ian
Victoria Australia
Posted: 7 May 2009
I am looking for parts for my Williams Rollergames pin. Looking to rebuild it, so anything you have may work. Please let me know.
Contact:
Travis Bruehl
Deltona, FL 32738
Posted: 7 May 2009
Looking for a non-faded, non-rusted lower apron (card tray) for a Bally Old Chicago. Also, looking for the right slingshot plastic for a Gottlieb Raven. NOS or used, as long as it's not cracked, chipped, or broken.
Contact:
Jim P.
voice: 717-564-1032
Near Harrisburg, PA
Posted: 7 May 2009
Desperatly seeking 'Suzann won't do', but a strobe assembly # AS-2518-62 for a Flash Gordon will.
Contact:
Claude Leblanc
voice: 418-204-2050
167 Ave Jacques Cartier
Donnacona, Quebec G3m 2b2
Posted: 5 May 2009
Looking for the Red, White, and Blue Domes for the top of a Williams F-14 Tomcat as well as the motor assembly.
Also need the speaker panel assembly as well.
Contact:
Joe Voyt
Scranton, PA 18505
Posted: 5 May 2009
1969 Gottlieb Airport Plastic set. Actually only the left side vari-target cover.
Contact:
Brian Boos
32 West Pittsfield St
Pennsville, NJ 08070
Posted: 4 May 2009
I am having trouble locating leaf switches for the score drums of my 1964 Bally Grand Tour. I've had recent ads here in the past about these particular score drums.
These are Bally drums, with the yellow reels. However they are 4" diameter reels which seems to make them unusual.
The components of the score unit are the same as the 3" yellow unit - except that the leaf switches are longer, and a little lighter weight. The arm that actuates the leaf switches is the same metal part as the 3" reel, except that it has a fibre extension on it, about a 1/2" long. And finally, the plastic plunger is the same as the 3" unit, except that it has a metal extension on it.
I have searched all over for the leaf switch blades, and can't find them. I've tried a couple of the major online parts suppliers, they don't have them either.
I made detailed drawings of my leaf switch blades, with dimensions, and I'll be glad to email it to anyone that asks, in the form of a PDF file. Then you can see exactly what I need.
If you know of a supplier, or if you have these switch stacks, please let me know.
Contact:
Fred Martin
Posted: 4 May 2009
I am looking for side art for a Terminator 2 pinball machine. I could make due with just the left side but certainly will take an entire set if it is available
Contact:
Gil Helms
Posted: 4 May 2009
Gottlieb score and instruction cards for FOTO FINISH and HAPPY CLOWN
Contact:
Tony Mather
Posted: 3 May 2009
I've been looking for an populated playfield for a 76 Gottlieb Solar City, in good decent condition.
Contact:
Tim
Northern, VA.
Woodbridge, Dumfries, Fredericksburg, Stafford
Posted: 3 May 2009
I am looking for some plastics for Alien Poker. Specifically the top right arch plastic and any other you might have in great shape. I would buy a complete set for the right condition.
Contact:
Bill
Posted: 3 May 2009
I am parting out a 1948 Chicago Coin Football machine. Art glass is gone, all other parts available. If interested please contact me by email for details.
Contact:
Tim Kryzer
voice: 651 737 4269
4365 Little Bluestem Trail North
Lake Elmo, MN 55042
Posted: 3 May 2009
Looking for the dust cover that fit on all play lights on Bally XENON game. Thay are color tubes yellowish red reddish pink. Need all of them can you help?.
Contact:
Joe Fuller
voice: none, fax: none
Meadow Glen Dr
Elkhart, IN 46516
Posted: 3 May 2009
Looking for a mint or near mint Gottlieb 'full' apron and the smaller apron that covers the 'shooting plunger' for my 1977 Sure Shot. Excuse my terminology. I'm a novice in world of pinballs.
Contact:
Bill Rabara
voice: 419-349-1035, fax: 734-847-4560
7443 Bridgeway Dr.
Temperance, MI 48182
Posted: 2 May 2009
Need Bally speaker panel. 1995 thru 1999. The plain black with Bally logo. (ex. AFM, Scared Stiff, NBA, Champion Pub) US REPLIES ONLY.
Contact:
Ron Douglas
voice: (636) 798-2215
11 Wilderness
Defiance, MO 63341
Posted: 2 May 2009
1974 Gottlieb Sky Jump NOS or nice used playfield. Email with price and condition. Will pick up in Allentown or ship.
Contact:
Tom Drum
Port Matilda, PA 16870
Posted: 1 May 2009
1979 Bally Space Invaders I need decent plastics for a Space Invaders. The right slingshot is broken in half, and the rest have major bowing even after being heated and flattened. Email with what you have and an asking price.
Contact:
Tim Maleck
TX
Posted: 1 May 2009
Looking for a metal cashbox for Bally Strikes and Spares (actually, it fits many machines) Also would like plastic slider tray that fits inside box.
Contact:
Mark Edwards
voice: (805) 570-7518
922 Laguna St.
Santa Barbara, CA 93101
Posted: 1 May 2009
Wanted: head unit of a Flash game (head cabinet, wiring, displays and boards; no BG needed).
Contact:
Steve Price
Grand Rapids, Michigan USA
Posted: 1 May 2009
Does anyone have a Ted's head from Road Show, if so please contact me.
Contact:
Annette Kennedy
voice: 02 98341919
8 Utah Place
Erskine Park, NSW Australia 2759
Posted: 1 May 2009
Looking for a Gottlieb PANTHERA backglass as close to mint condition as possible.
Contact:
Ken Orr
voice: 503 788 4213
Portland, Oregon 97266
Posted: 30 April 2009
1965 Gottleib Flipper Pool backglass wanted.
Contact:
Chris
Posted: 29 April 2009
Looking for a nice playfield for a 1975 Gottlieb Fast Draw or Quick Draw. Doesn't have to be perfect, just decent condition. Prefer populated, at least underneath, but will consider anything. Price depends on condition and shipping costs.
Contact:
Dale
Aldergrove, Bc
Posted: 29 April 2009
1996 Gottlieb Mario Andretti red plastic ramp that is the ball shooter lane.
Contact:
Nick Fusillo
voice: 330-904-4319
Canton, OH
Posted: 28 April 2009
1947 Chicago Coin 'Pistol' gun game Backglass
Looking for an original or reproduction.
Please let me know if you know where I could have them made.
Contact:
Rich
voice: 209-648-8403
Sonora, Calif. 95370
Posted: 27 April 2009
Looking for a nice Data East Jurassic park playfield cabinet.
Looking for a nice Sega X-Files playfield cabinet or side art.
Contact:
Mike McCormick
voice: 901-381-4364
6139 Gailyn Cv
Bartlett, TN 38135
Posted: 27 April 2009
I am looking to buy these gun games. 1963 Chicago Coin RIOT GUN, 1969 Chicago Coin SUPER CIRCUS with 8 track & audio, 1976 Chicago Coin CONEY ISLAND, 1969 Williams SPOOKS, 1970 Williams BONANZA, 1974 Midway GANGBUSTERS, 1974 Kasco UNTOUCHABLE
Contact:
Chris Cragg
voice: 805-938-0799
Posted: 27 April 2009
1965 Williams Big Chief. Looking for the selector disc plastic. It is at the upper left top of the playfield.
Contact:
Jimmy Hefner
voice: 405-659-0563
3150 NW 24th St
Okc, OK 73107
Posted: 26 April 2009
Looking for a bottom cabinet complete with playfield and motorboard for Gottlieb EXTRA INNING.
Need a mid-60s Gottlieb add a ball machine score card tray. This tray was used on several games from this time period. It has the red and blue dots around the outside.
Looking for a head with original paint for Williams PALOOKA. No guts or backglass needed.
Want the following sheet metal back doors to heads:
1. Approx. 27 1/2" wide x 24 5/8" early 70s Gtb 2 or 4 player door.
2. Approx. 21" wide x 26 1/4" high late 50s Gtb single player door.
Looking for an empty decent original bottom cabinet and head for Gottlieb SNOW DERBY, SNOW QUEEN, or BRISTOL HILLS.
Need the following playfields either very nice or NOS:
Gottlieb ROTO POOL
Gottlieb CRISS CROSS
Can pick up at Allentown May 1st-3rd.
Contact:
Dave Metrando
voice: 845-691-6205
Highland, New York
Posted: 26 April 2009
1976 Playmatic Fandango backglass: It does not need to be in mint condition. Good or better would be fine.
Contact:
Robert Mem
Oakland, CA
Posted: 25 April 2009
I need a part for my Johnny Mnemonic pinball. Someone told me the part I need is called the Ramp Protector. I have a link to the picture. It's over the left ramp for the Johnny Mnemonic pinball. I also need the decals or stickers for that piece.
Contact:
Steve
CA 91301
Posted: 25 April 2009
I need a backglass for a 1947 UNITED HAVANA pinball need to be near St. Louis.
Contact:
Bob
Posted: 24 April 2009
Wanted:
Frontiersman plastics, and other parts
Jungle Lord backglass
Rockmakers backglass
Contact:
Steve Price
Grand Rapids, MI
Posted: 24 April 2009
looking for bram stoker dracula main ramp. mine has a bubble on it from a light bulb.
Contact:
Johnny Wright
Posted: 23 April 2009
Looking for Gottlieb Crescendo Backglass in 8+ condition.
Looking for Chicago Coin Casino Backglass in 8+ condition.
Contact:
T.bouwkamp
Niles, MI 49120
Posted: 23 April 2009
1985 Gottlieb Bounty Hunter Sound Board with daughter board
Williams High Speed backglass
williams Big Deal (EM) backglass
Contact:
Wayne's World Of Home Amusements
voice: 386-748-4946
163 North Frederick Street
Pierson, Florida 32180-2380
Posted: 21 April 2009
Wanting Freds Choice Plastic 'A' off a Flintstones.
Contact:
Peter
William
Melbourne, Vic 3147
Posted: 21 April 2009
1969 Williams Miss-O: Looking for a backglass in decent condition. Can pick up at Allentown show.
Contact:
Terry
Posted: 20 April 2009
WANTING: head box decales for a Flintstones.
Contact:
Peter
William
Melbourne, Victoria 3147
Posted: 20 April 2009
For a 1959 Gottliebs Queen Of Diamonds. Still looking for the Mechanics board, located on the very bottom of the main cabinet. It contains the Score Motor, Transformer, as well as a variety of Relays and Contacts. The unit that controls the action of the Spinning unit behind the back glass is missing. I thought I had one located. It turned out to be an offer from some jerk in the west indies. I asked him if the wood on this unit was painted Red. He said he had a red one for sale. Any help will be greatly appreciated. They are out there, you have to be careful.
Contact:
Bill
voice: 203-734-1076
CT
Posted: 19 April 2009
1991 Bally Party Zone, in need of a working Captain B.Zarr head motor, part no 14-796 12V. This rotates the captain's head. Does anyone carry them new? Also in need a cosmic cottage assembly (top of shooting lane) and rocket ship assembly (lower left ramp) in good condition Compleat.
Contact:
Paul L
Sydney, N.s.w. Australia
Posted: 18 April 2009
1978 Bobby Orr Power Play - Right slingshot plastic (American Flag)
Contact:
Barry Harper
Canada
Posted: 17 April 2009
For pick up at Allentown:
Gottlieb Surfer cabinet/parts game
CCM Funland rifle (or any mid 70s CCM rifle);
United Bowling Alley (1956 ball bowler) backglass;
GTB Top Score/300 playfield;
WMS Olympic Hockey plastic (top left);
GTB Scuba plastic (with the octopus on it);
WMS Touchdown Cabinet (with original art);
BLY Expressway (or similar) head (just the backbox, no guts);
WMS ANY 1960 cabinet bottom(funky 'front shelf' style);
Backbox 1968 2 player Bally;
Cabinet for Wms Lady Luck (with original art);
GTB Grand Slam Cabinet (with original art);
GTB Big Hit motorboard.
GTB 1962 Cabinet bottom
GTB Soccer cabinet with original artwork
Contact:
Mark C. Roller
voice: (863) 206 5402
Posted: 17 April 2009
I need a set of nos Terminator 2 pinball decals or a reproduction set
Contact:
Alex Brown
New York
Posted: 17 April 2009
I need a Willaims palisades wiring diagram in good condition or new/reproduction
Contact:
Alex Brown
New York
Posted: 17 April 2009
Zaccaria Magic Castle backglass
Contact:
Massimo
Milano - Italy
Posted: 17 April 2009
1948 UNITED metal post at bottom of lower kick out holes. these have a place for 3 rubbers to keep ball from jumping over playfield. these are on caribbean, carolina, county fair, paradise, summertime, I need 6 also if you have any older united parts let me know I also need 6 white bumper caps that say bonus in blue lettering they were red on summertime these will work also. and need a good front door. Let me know.
Contact:
Bob
Posted: 16 April 2009
1982 Bally Baby Pac-man Plastics: large upper Playfield plastic in particular or set - no breaks - Last item need to complete game.
Contact:
Steve
voice: 248-760-7381
MI 48323
Posted: 16 April 2009
I'm looking for a couple of 4 digit leds from a 1987 Williams Gold Mine. P/N 5670-09439-00 player score display. I only need 1 but thought better get 2 in case. If you can help me please call. I'm always looking for unique bingo pinball games. Will buy or trade for 1800 guns.
Contact:
Brett
voice: 252 453 6124
Coinjock
Barco, NC 27917
Posted: 16 April 2009
Looking for a NOS Data East Star Trek 25th Anniversary ramp.
Also Looking for a NOS Williams Star Trek TNG klingon ship.
Contact:
Marco
Australia
Posted: 16 April 2009
Weird request here, but does anyone have measurements/specs of late 70's Bally Cabinets? Need to reproduce one and any help would be appreciated for some good measurements, specs, etc.
Contact:
David
Posted: 16 April 2009
Alca Target UFO Electo-mechaical arcade schematics and manual wanted
Contact:
Jack Gordean
Acton, CA 93510
Posted: 15 April 2009
I'm looking for a 1985 Williams Sorcerer backglass.
Contact:
Dave Baumann
Posted: 15 April 2009
Looking for parts for 1950 Dale/Exhibit Supply Six Shooter gun game
1) Backglass in good condition mine has crack in corner, but still presentable.
2) Back Door
3) Front Coin door
4) Score & Instruction cards
Contact:
Moe
Posted: 15 April 2009
Looking for the following items. Can buy outright or have lots to trade:
- Judge Dredd- looking for plastic eagle topper that mounts on top of backbox. Any decent condition considered.
Backglasses Wanted:
A-Go-Go, 1966 Williams. Good to excellent condition wanted.
Blackout, 1980 Williams. Excellent or better.
Firepower, 1980 Williams. Looking for NOS original mint condition. Not interested in any of the repros that are out there.
Playfields Wanted- can buy outright or have others to trade:
1977 Bally Strikes and Spares, NOS only
1980 Williams Blackout, NOS only
Contact:
Ray
voice: 801-272-0221
Salt Lake City, UT
Posted: 15 April 2009
1952 Gottlieb Queen of Hearts coin box
Contact:
Ronald Swatski
Posted: 14 April 2009
I am looking for all of the plastic ramps for Bally MOUSIN' AROUND
Contact:
Patrick Vancott
voice: 602-859-0737
2310 W. Augusta
Phoenix, AZ 85021
Posted: 14 April 2009
I need the image or picture in high resolution of backglass of Williams PHARAOH
If you have this please contact me. I moved and mine broke.
If can you help me, I'll be verry happy.
Contact:
Elias
voice: 11
Av Rudge
Sao Paulo, Sao Paulo Brazil
Posted: 12 April 2009
I am looking for an upper mini playfield for a JOKERZ pinball machine. Must be in decent shape. I also need a display board for it as well.
Contact:
Rick
St.charles, MO 63301
Posted: 11 April 2009
Looking for a wiring harness for a Bally Eight Ball Deluxe pinball. Need the playfield to circuit boards wiring harness.
Contact:
Steve
Florida
Posted: 11 April 2009
Looking for a backglass for a Williams Phoenix Pinball.
Contact:
Don Jugert
Denver/littleton, Colorado
Posted: 10 April 2009
Looking for a backglass for a Williams Pit Stop. Any condition considered. Please let me know price and condition.
Contact:
Brian Williams
voice: 920 565-3021
N9358 Franklin Rd
Elkhart Lake, WI 53020
Posted: 10 April 2009
Looking for a pair of sling shot plastics for a 1974 Gottlieb Duotron/Magnotron pinball. Plastics do not have to be prefect.
Contact:
Jamie
Saskatoon, Sask Canada
Posted: 10 April 2009
Williams/Sonic gate: Looking for the solenoid operated gate (the gate, not the solenoid) for Sonic Faces. It is Williams part A-4817-L-Modified.
Contact:
Bell Springs Pinball
Posted: 10 April 2009
Happy Clown - looking for a nice unpopulated playfield.
Contact:
Tony Mather
Posted: 8 April 2009
I am looking for 2 backglasses in good condition:
Bally Hang Glider
Williams Honey
Please contact me if you have either of these pinball glasses.
Contact:
Kevin Earsley
Illinois
Posted: 8 April 2009
I'm just looking for a Haunted House backbox with the light board and all hardware. I don't need or want the circuit boards or backglass. I need a decent physical and cosmetic specimen of the backbox, and will pay for crating, shipping, etc. up to my $300.00 limit. I will also pay up to $100.00 finder's fee to the person who leads me to a successfull purchase.
Contact:
Greg
California
Posted: 8 April 2009
Looking for a backglass for a 1976 Space Odyssey pinball machine.
Contact:
Blake Ausbrooks
voice: 580-772-6559
1533 Saber Lane
Weatherford, OK
Posted: 8 April 2009
SAM II, Stern Service Assistance Module II. I've run across one of these factory test fixtures. Is anyone familiar with these units? Does anyone have an operating manual? Any relavent information would be greatly appreciated.
Contact:
Steve
Jacksonville, FL
Posted: 7 April 2009
1969 Bally Space Flight 'Front to Rear' Trolley Motor and/or Parts Machine Needed ASAP! The motor runs but the gearbox is not operating. Parts machine also seriously considered if motors are working. Will pay! Will pay!
Contact:
Fred Bobrow
voice: 917-887-3554
Posted: 6 April 2009
1978 Bally Star Trek bottom cabinet needed. In the Texas and surrounding states area.
Contact:
Marc
Texas
Posted: 6 April 2009
Looking for a decent lower apron for a Gottlieb Add A Ball game, any one will do from the 70's.
Contact:
Joe Grenuk
Posted: 6 April 2009
Looking for the complete strobe unit on a Bally Flash Gordon.
Contact:
Ken
Racine, Wisconsin 53402
Posted: 6 April 2009
Looking to buy :
Plastics set for Bally Speakeasy
Plastics set for Gottlieb Countdown
Backglass for a Bally Medusa
Plastics set for a Stern Split Second
Playfield for a Bally Lost World (can be in poor condition) preferably populated
Bonus Unit for a Bally Kick-Off. Specifically the white gear/cog.
Contact:
Ken
Racine, Wisconsin 53402
Posted: 6 April 2009
PLAYFIELD PLASTICS NEEDED:
Williams Jokerz: left slingshot
Data East Star Trek: The girls that go over each slingshot plastic
Williams Firepower: The plastic that goes over the right-center target bank, over targets 4,5,6.
Used but uncracked is fine. Repros are fine.
Contact:
Mike
Posted: 6 April 2009
1973 Gotlieb Hot Shot playfield plastics, nice condition but not broken
A-14604-R
A-14604-L
C-14606
C-14605
Center piece under the bumper (don't have number)
Contact:
Robert Tepper
voice: 352-382-1841
FL 34446
Posted: 5 April 2009
I need a close flipper coil for a 1966 Bally Capersville pinball machine, it's a 50 volt 60 hrtz coil, I can sent pic's, if you think you may have one. It's all I need to make this machine like new.
Contact:
Mick Brown
89sutton Dr.
Ringgold, GA 30736
Posted: 5 April 2009
1999 Bally Revenge from Mars 'kit'
Looking for the complete conversion package to be able to convert my Star Wars Episode I. Allentown delivery ok if not local.
Contact:
Jim
Bergen County, NJ
Posted: 4 April 2009
Need playfield plastics for:
Gottlieb Flying High (2/1953) - good originals or repros
Gottlieb Straight Shooter (1/1959) - good originals or repros
Need Backglass for:
Gottlieb Chinatown (9/1952) - Looking for repro
Gottlieb Auto Race (9/1956) - Looking for repro
Need instruction / score cards for:
Gottlieb Diamond Lill (12/1954) - repro, original or scan
Contact:
Jim Southwell
voice: 864 593 8321
Mauldin, SC 29662
Posted: 4 April 2009
Sweethearts Gottlieb 1963 - after a nice set of playfield plastics.
Contact:
Tony Mather
Posted: 4 April 2009
1988 Williams Cyclone Ferris Wheel Ramp-useable condition.
Contact:
Chris Dixon
Bc Canada
Posted: 3 April 2009
Flipper Fair backglass wanted, email w/price and condition.
Would love to pick up at Allentown.
Contact:
Ed
Maine
Posted: 3 April 2009
I am looking for any information on the Bally add a ball kits. I have a MiniZag 1968 Bally that has an option to add the cable and kit for add a ball. Do you have a print with it on there? Any information will be helpful.
Contact:
Bob Graham
Columbia, TN 38401
Posted: 3 April 2009
Looking for 1965 Bally Band Wagon back glass in very good condition to replace one that's fairly flakey, or may consider selling game.
Contact:
Keel Heisler
1791 Trotters Lane
Stone Mountain, GA 30087
Posted: 3 April 2009
Looking for a Qberts Quest backglass. Prefer an 8 or better out of ten. Will consider others.
Contact:
Brian
Posted: 3 April 2009
Looking for ball launch assembly for 1989 gottlieb hot shots game. I have the motor which appears to work but I'm missing the playfield parts that actually launch the ball.
Contact:
Rick Hipes
3013 Lyme St
St.charles, MO 63301
Posted: 3 April 2009
Wanted spare parts for Atari's Hercules. Let me know what you have.
Contact:
Brian
Posted: 3 April 2009
Parts wanted for DE Robocop: plastic set for lower playfield or at least plastics for slingshot bumpers, laserkick, and center guard directly underneath middle popbumper.Also need the blue plexiglass piece in top right corner of backbox where it says 'in digital stereo'. Plastics must be in very good condition at reasonable price.
Contact:
Mike Myers
Posted: 2 April 2009
Williams Pharaoh: Looking for Chamber plastic
Contact:
Todd Svec
Sparks, NV 89436
Posted: 2 April 2009
Looking for glass and coin door for Big Daddy Williams pinball machine.
Contact:
William Trulock
Posted: 2 April 2009
1965 Bally Deluxe Fun Cruise or Gay Cruise backglass or entire machine in excellent condition.
Contact:
Randy
Long Beach, CA
Posted: 1 April 2009
Apron or card tray for 70's Gottlieb Add a Ball. Also, need arch cover (the part at the top of the playfield that has the serial number attached to it)
Contact:
Jack
Atlanta, GA
Posted: 1 April 2009
Looking for Kings of steel parts. I need the plastic center target, and the plastic piece that goes over the center target from post to post.
Contact:
Kevin
Spring Grove, IL
Posted: 1 April 2009
Williams Black Knight 2000 Short habitrail 'tube' which drops the ball from below the flipper on the upper playfield onto the lower playfield
Contact:
David Dutton
20 Station Road
Marsden, West Yorks Hd7 6dg
Posted: 1 April 2009
1) Whitewater topper and used boulder caps in good condition
2) 1991 Williams Terminator 2- need plastics
3) Original Stern Stargazer/Nine ball/Catacomb/Galaxy manual
4) Looking for used T2 and Star Gazer playfield, any condition considered.
5) NOS Theatre of Magic translite
6) Stern Catacomb backglass
7) Flyer- Gottlieb Haunted House
8) T2 Skull assembly
9) Fish Tales center plastic on Boat Ramp
10) Haunted House- big Spider web plastic that goes over lower playfield.
Contact:
Rob
Ashburn, VA 20147
Posted: 31 March 2009
Gottlieb score and instruction cards for HAPPY CLOWN and THORO-BRED.
Contact:
Tony Mather
Posted: 31 March 2009
Looking for unbroken bumper cap(s) for 1984 Bally Kings of Steel.
Contact:
Scott
Waukegan, IL 60085
Posted: 31 March 2009
I'm looking for a Mibs Backglass. It doesn't need to be in new condition.
Contact:
Mike Stipic
voice: 510-303-9906
Castro Valley, CA. 94546
Posted: 30 March 2009
Looking for master score display for my 1978 Williams Phoenix Game. This is williams system 4 or any display that will work on this game.
Contact:
Rick Hipes
voice: 636-262-5334
3013 Lyme St
St.charles, MO 63301
Posted: 30 March 2009
Looking to buy an EM arcade game. I would rather it be non-working, but will consider working ones as well. Please email or give me a call.
Contact:
Randy
voice: 757-868-4304
Poquoson, VA 23662
Posted: 30 March 2009
1962 Williams Tradewinds Trade Winds Pinball backglass wanted. Any condition. Also advise if any other parts available. Also looking for a complete Tradewinds machine in good condition.
1963 Gottlieb Swing Along backglass wanted.
Don't want to sell? I also have other backglasses for trade - Baseball pitch and bats Official Baseball and Pinch Hitter, GTB Kings and Queens, and WMS Heat Wave.
Contact:
Don Klein
San Juan Capistrano, CA 92675
Posted: 28 March 2009
Bally Carnival 1957 2 Player. Looking for machine in restorable to excellent condition. Please email pics and/or call.
Contact:
Pinball Revival Company
voice: 415 883 4180
372 Bel Marin Keys Blvd
Novato, CA 94949
Posted: 28 March 2009
MAVERICK (1994 - Data East/Sega)
-- looking for TOPPER, POKER CHIP BALL SHOOTER, OPTOS (515-5102/5103)
Parts needed:
working set of OPTICAL SWITCHES for Laureen Belle Lock Ball Trough
(part # 515-5102 (2) and # 515-5103 (2)
Parts would like:
Poker chip ball shooter assembly (prefered yellow one)
topper (plastic playing cards assembly)
Willing to pay fair prices based on condition.
Contact:
Kenny
voice: 703-209-3234
Vienna, Virginia 22181
Posted: 28 March 2009
1981 Bally Fireball II playfield plastic set, either nice used or NOS. Email with price please.
Contact:
Tom Drum
voice: 814-692-7117
Port Matilda, PA 16870
Posted: 27 March 2009
Bad Cats Williams NOS cabinet decals game is 1999 bright orange.
Contact:
Ken White
voice: 650 400 0207
833 N Idaho St
San Mateo, CA 94401 USA
Posted: 27 March 2009
Looking for backglass for Wagon Train by Gottlib 1960 in good or great shape. Please email photos and details.
Contact:
Sarah Bullard
13375 S Hwy Dd
Ashland, Missouri 65010
Posted: 27 March 2009
Looking for complete head/backbox for following games
Eight Ball Deluxe
Future Spa
Contact:
Billy Koelewyn
Richmond, VA United States
Posted: 27 March 2009
Need backglass to a Gottlieb 1970 Aquarius as well as top right playfield plastic.
Contact:
Ken Head
Southlake, Texas
Posted: 27 March 2009
I have an unused Alan Meyer repro backglass for Black Knight 2000 for sale. $350 or best offer. This is the glass with the bright red colors. Looks great.
Still in original box. Pics available on request. Shipping is available at cost. Insurance required
Contact:
Steve Hess
24 Ilinka
Irvington, NY 10533
Posted: 26 March 2009
Midway Duck Hunt. Looking for parts/photo cells/etc.
Contact:
Joe
Buffalo, NY 14220
Posted: 26 March 2009
1965 Williams Big Chief Plastic Set- mainly the upper left spinning wheel.
Contact:
Ernest Solis
voice: 830-708-2107
427 Aaron Ln
New Braunfels, TX 78130
Posted: 25 March 2009
1980 Williams BLACKOUT Plastics needed. Don't have part numbers, so email with what you got.
Contact:
Jeff
Fort Wayne, In
Posted: 25 March 2009
Need 1961 Gottlieb Oklahoma backglass in good condition.
Contact:
Wayne
Posted: 25 March 2009
Want to buy Original Pinball flyers in good condition, any make, any style. Willing to pay fair price for any quantity. Email your list and price.
Contact:
Tony
Brisbane, Australia
Posted: 25 March 2009
1957 Gottlieb Continental Cafe backglass, any condition considered, also need a set of legs for the same machine.
Contact:
James Sullivan
Arlington, Virginia
Posted: 23 March 2009
1961 Williams Kismet Lockdown bar -- not specific to this machine. Not worried about cosmetic condition as long as it's complete. This is the lockdown bar with the removable end pieces. Believe this is identified in the 1966 catalog as D-5835 with 21B-6597(RH)+ 21B-6596(LH)
1961 Williams Kismet Swinging target assembly -- in the 1962 parts catalog this is shown as B-5839. ('66 catalog shows B-6045 and '74/'75 catalog shows B-6045R)
Contact:
Alfred Forbrich
voice: (403) 769-2113
Calgary, Alberta T2z3g9/canada
Posted: 23 March 2009
Wanted: Backglasses for Bally Trio and Mini Zag, Atari Middle Earth.
Contact:
Wesley Goodin
voice: 972-268-2252
Posted: 23 March 2009
Wanted: Backglass For a 1948 United Rondavoo Any Comdition Wanted. I just Need One Shippers Broke Mine. Also I need a backglass for Data East Monday Night Football. Also need a 7 or better backglass for a 1963 Williams San Fransico.
Contact:
Gary Eggers
voice: 5074403552
2559 490th St.
Stacyville, IA. 50476
Posted: 23 March 2009
Wanted: Plastics or scans of plastics for 1957 Gottlieb Royal Flush.
Contact:
Wesley Goodin
voice: 972-268-2252
Posted: 23 March 2009
Bobby Orr Power Play and Spiderman, The Amazing (1980) playfields, with all plastics. Any condition. Drop Targets, assemblies and coils on back side are not important.
Contact:
Michael Maxwell
voice: 434-944-3691
Bedford, VA USA
Posted: 22 March 2009
Data east Monday Night Football Back Glass In Fair Useable Shape. Doesnt Have to Be perfect. Name Price with Shipping. Scammer beware. Tracker is Here.
Contact:
Gary Eggers
voice: 5074403552
2559 490th St.
Stacyville, Iowa 50476
Posted: 21 March 2009
Data East Rocky and Bullwinkle Nell Log Gear/Pulley Assembly.
Contact:
William Longo
Posted: 21 March 2009
Many items wanted: plastics for Twister pinball machine, and pinball lift/jack for easy moving/transferring of pinball machines.
Contact:
Virginia Owen
voice: 419-646-3475
15409 Old State Route 12
Columbus Grove, Ohio 45830
Posted: 21 March 2009
Wanted Adams Family Cabinet or one that I can put the game in. Can pick up at Allentown Show (on Saturday) or can drive to your location, if it's not too far away.
Contact:
Elm City Neon
voice: ( 203 ) 230 - 8300, fax: same
374 Treadwell Street
Hamden, CT. 06514
Posted: 21 March 2009
1989 Williams Whirlwind.
I am looking for the upper right Ball Guide Assembly (Williams PN A-13360). Please let me know if you have this metal piece for sale.
Contact:
Brian Wahlen
Briwn Deer, Wisconsin 53223
Posted: 20 March 2009
Looking for a Stern "Magic" backglass and plastics.
Contact:
Dean
AB Canada
Posted: 20 March 2009
Looking to buy a Gottlieb "Free Fall" playfield in good condition.
Complete or stripped OK, but don't want any major wear or cracking in paint. Also need lightbox cabinet (head) for "Free Fall" or "Sky Jump". Don't need any internal components, just the empty shell in good condition with the original paint. I can pick these up at the Allentown show coming up in May.
Also want to buy playfield lightshield set (plastics) for a Gottlieb "Target Alpha", and metal S/I card frames for Williams "Reno" or "Jig Saw" woodrails.
Contact:
Joe
Posted: 20 March 2009
1961 Williams Batting Champ backglass wanted. Hopefully better than mine. NOS or repro.
1968 Williams Student Prince backglass wanted.
1971 Williams Gold Rush backglass wanted.
Contact:
Wesley
voice: 972-268-2252
Midlothian, TX
Posted: 20 March 2009
Looking for plastics (esp the time expander) for a Doctor Who.
Contact:
Brent Stiles
Cincinnati, OH
Posted: 20 March 2009
Looking for Friendship 7 1962 Williams Backglass, also front lockdown bar for the game.
Contact:
Bart
Oklahoma
Posted: 19 March 2009
1948 Bally Heavy Hitter original wood stand. Any condition. Please call Bert if you have one for sale.
Contact:
Bert Oppenheim
voice: 508.320.9725
Medway, MA 02053
Posted: 18 March 2009
1975 Gottlieb Spin Out plastic wanted.
1974 Gottlieb Magnotron center plastic wanted.
Contact:
Don
voice: 510-714-5589
38838 Jonquil Dr
Newark, CA 94560
Posted: 18 March 2009
1981 Williams Barracora backglass - NOS/9+ condition desired and willing to pay your price. Also have other NOS/rare parts if trades are preferred.
Contact:
Dave K.
Posted: 18 March 2009
I need electric diagram of the Far Out pinball.
Contact:
Celso Ricci
Rua Cecilia M. Gaboardi,116
Itatiba, São Paulo Brasil
Posted: 17 March 2009
Looking for a backglass for Chicago Coin Riviera, also Bally Champ 4 player backglass. Please let me know.
Contact:
Joseph Pfeifer
voice: 631 748-1279
55 Franklin Street
Amityville, N.Y. 11701
Posted: 17 March 2009
I'm looking for a Rudy lampshade for a Funhouse machine. Mine is completely missing. I need the whole lampshade assembly including the standoff piece and the plugin to plug the lamp underneath the playfield. Can anybody help?
Contact:
David Lougy
voice: (619)248-9365
2801 Capps St.
San Diego, CA 92104
Posted: 17 March 2009
Bally EM Coin door and Frame, Looking to purchase a Bally coin door and frame suitable for a 1971 Bally Odds and Even. Email me with condition and a price.
Contact:
Barry Harper
Ontario Canada
Posted: 15 March 2009
Looking for a 1979 rolling stones playfield in great shape. Also a kiss play field in great shape.
Contact:
Dino
Posted: 15 March 2009
Looking for a decent Solar Fire backglass. Will pay for a nice example. Also would be interested in Solar Fire upper and lower playfields if they were upgrades to what I have now.
Contact:
Mark
voice: 248-921-3981
Commerce Twp., Michigan
Posted: 15 March 2009
Looking for someone who restores playfields. Also looking for someone who restores pinball machines, the outside and all over.
Contact:
Dino
Posted: 15 March 2009
Need Headglass for 1947 Esco Fast Ball Pinball.Must be in very good cond.Tough item to find -if you know of a silksceen co that can handle a copy let me know please
Contact:
Robert Feeney
voice: 5169246448
Islip, NY 11752
Posted: 15 March 2009
Wanted to trade. Gottlieb legs, I have a perfectly good 31" set of 4 on my game, but my game is supposed to have 27" legs. Trade anybody?
Contact:
Greg
Posted: 15 March 2009
1981 Bally Medusa Apron -- Looking for a Medusa Apron, must be mint or near mint. Email with what you have.
Contact:
Jim Heck
122 Robin Hill Rd
Chelmsford, MA 01824
Posted: 14 March 2009
1984 Bally/Midway Spy Hunter pinball - backglass, playfield plastics, spinner, bumper cover, side art.
Contact:
Brad Stith
Posted: 14 March 2009
I am in need of a backglass for a Bally Mini Zag.
Contact:
Thomas A. Gray
Durham, NC USA
Posted: 14 March 2009
Wanted, Gottlieb Counterforce in good working condition. Will consider something that needs work. Also wanted Williams Solar Fire in good working condition. Please contact Art Johnston.
Contact:
Art Johnston
voice: 845 742 1264
Monroe, NY
Posted: 14 March 2009
1977 Bally Power Play (Bobby Orr) Right slingshot plastic (American flag) Good used condition to mint.
Contact:
Barry Harper
Ontario Canada
Posted: 13 March 2009
Hot Shots (Gottlieb 1989) NOS translite. Have lots of cool stuff to trade or can buy outright.
Contact:
-danno-
Posted: 13 March 2009
Looking for an original 1960 United Sure Fire shuffle alley schematic. Also looking for 2 triangular inserts 2 13/16 for puck or ball bowler and maybe pinball too.
Contact:
Pascal
Quebec Canada
Posted: 13 March 2009
Need the repair manual for Hollycrane.
Contact:
Rick Force
voice: 906-923-3199
3901 San Lorenzo River Road
Ontario, Cal. 91761
Posted: 13 March 2009
1961 Gottlieb Big Casino - looking for a nice set of playfield plastics (there are only 2 near the flippers)
Contact:
Tony Mather
Posted: 12 March 2009
1965 Gottlieb Thoro-Bred - looking for a nice set of playfield plastics and instruction card for this game.
Contact:
Tony Mather
Posted: 12 March 2009
Brunswick Aspen power supply and circuit board
Contact:
Danny Gipson
Century Drive
North Richland Hills, Texas
Posted: 12 March 2009
Looking for a 1979 Bally Rolling Stones playfield. In great shape.
Contact:
Dino
Venetia, PA USA
Posted: 12 March 2009
WTB: Williams High Speed backbox red beacon topper insides 'the flasher unit and mounting.'
Contact:
Bob Kugler
Posted: 12 March 2009
1987 Gottlieb Monte Carlo. Looking for a translite for this machine, in good or better conditions.
Contact:
Sylvain
Ottawa, Ontario Canada
Posted: 11 March 2009
Wanted dead or alive: WMS 1962 Friendship '7' playfield. Only looking for supreme example with minimumal or no molestation, preferably unpopulated. Faded out, moldy, badly worn, poorly touched up, improperly clear coated, termite damaged, warped - thanks, but no thanks. Have many obsolete parts available for trade or will purchase outright - always.
Contact:
Michael Scott
voice: (702)378-4678
Las Vegas, NV
Posted: 11 March 2009
Wanted: GTB 1958 Roto Pool pop bumper 16 point daisy caps. 2 red, 2 blue w/crisscross pool sticks. No holey, faded, cracked, chipped out junk please. Improperly touched up or missing ink is acceptable. Will need close up top and bottom pics. Parts to trade or will purchase outright.
Contact:
Michael Scott
voice: (702)378-4678
Las Vegas, NV
Posted: 11 March 2009
1979 Game Plan Star Trip. M-120 Coctail Table Pinball Game.
I need the ribbon cable that connects the MPU-1 to the two display boards. Anyone having parts for this game can contact me, I would like a few parts.
Contact:
Lawrence Martin
voice: 408-569-2875
70 Topeka Ave.
San Jose, California Vferc
Posted: 10 March 2009
Wanted: Cirqus Voltaire centre ramp A-21806, new or used but not damaged.
Contact:
Jose Civera
Valencia, Valencia Spain
Posted: 10 March 2009
Full house or Top Hand--center plastic that covers card area
Contact:
John
Posted: 9 March 2009
Need a Backglass for a Bally Harlem Globetrotters on Tour Pinball Machine. Need a good looking one for a near completed restoration.
Contact:
Eric Shearin
982 White Level Rd
Louisburg, NC
Posted: 9 March 2009
I am looking for extra wireform ramps from 1990 - 1999 Bally/Williams DMD pinballs. Mostly looking for ramps from Indiana Jones, Medieval Madness, Theatre Of Magic, Shadow, Champion Pub, Addams Family, Tales Of The Arabian Nights. Anybody have these from parted out games, or ones that they replaced? I would also consider ramps from other games, so if you have something, check with me. I am also looking for some extras of the wire apron guards. I need some widebody ones from either a Twilight Zone, or Indiana Jones, and I also need some of the standard size ones which are very common and come on games like Shadow, Addams Family, CFTBL, Theatre of Magic, and so on. Please contact me if you have any of these pieces, and would like to sell them.
Contact:
Michael Chestnut
voice: 615 - 824 - 6116
129 Grassland Drive
Gallatin, TN 37066
Posted: 8 March 2009
Wanted:
Bally NOS playfield for Mystic
Bally NOS playfield for Supersonic
Bally NOS playfield for Hang Glider
Bally Hang Glider backglass
Contact:
John
NJ
Posted: 8 March 2009
WANTED: Judge Dredd Crane Cover Plastic (NOS or Used and uncracked)
Contact:
Fred Collins
CO
Posted: 8 March 2009
1961 Gottlieb Show Boat Backglass-in one piece.
Contact:
Ed Miller
MI 49103
Posted: 7 March 2009
Looking for playfield plastics for the following Gottlieb games:
Hurdy Gurdy
Central Park
Flipper Fair
300
Looking for playfield plastics for Williams San Francisco.
Contact:
Mike
Carmichael, CA
Posted: 7 March 2009
Looking for Coleco 'Welcome Back Kotter' home pinball game from 1976.
Pictures, flyer, game itself (any condition considered).
Contact:
John Robertson
voice: 604-872-5757
2343 Main St.
Vancouver, Bc V5t 3c9, Canada
Posted: 6 March 2009
1961 Williams Batting Champ, reproduction or mint backglass.
Contact:
Stuart Green
1 Edgecomb Road
Binghamton, NY 13905
Posted: 5 March 2009
Jackbot plastic one in particular in front of spiral ramp on right.
X-Files under-ramp decals old(attached or not)-new-repro or help on making some.
Let me know of any and all game specific parts for either of these games you may have available.
Contact:
Jimmy P
Posted: 5 March 2009
Looking for a copy of Stern Stars and Strikes Ball Bowler. Any help?
Contact:
Robert
voice: 740 385 0240
Ohio 43138
Posted: 5 March 2009
I'm chasing the plunger/launcher (its should be in the shape of a rod) for my Fishtales game.
Contact:
Mick
Belmont, Victoria Australia 3216
Posted: 5 March 2009
Looking for a Gottlieb Volley backglass. Your help would be much appreciated.
Contact:
Dean Pierce
Eagan, MN
Posted: 3 March 2009
WTB: Super Score/Hi Score playfield, Gottlieb.
Contact:
Joseph Colizoli
Po Box 295
Bellevue, Ohio 44811
Posted: 3 March 2009
I've been looking for an populated PF for a 1976 Gottlieb Solar City for a few years now. Can anyone help me?
Contact:
Tim
Triangle, Woodbridge, Fredericksburg, VA
Posted: 3 March 2009
Playfield plastics for Gottlieb Games:
1975 Abra Ca Dabra
1976 Target Alpha
1976 Royal Flush/Card Whiz
1973 Hot Shot/Big Shot/Pro Pool
1973 Jack in the Box/Jumping Jack, especially the center C-14477
1966 Masquerade
1978 Bally, Playboy bumper caps and drop targets
1991 Bally/Midway Bugs Bunny Birthday Ball, plastics, flippers, parts.
Contact:
Gary
Posted: 2 March 2009
Wanted, Repairible and / or parts circuit boards. I am looking for Williams Level 3, 4, 6, and 7 solenoid driver boards, early Bally Lamp and solenoid driver boards, Gottlieb system one and system 80 solenoid driver boards. MPU/CPU Boards? You must price them for what they are. The more the better to save on shipping. Let me know what you have and want. No photos nessesary. My intent is to rebuild and re-sell as a service to the preservation of pinball.
Contact:
Nabours Novelty Inc.
voice: 3209635953
320 Highway 55 West
Maple Lake, MN 55358
Posted: 2 March 2009
1977 Gottlieb Vulcan / Fire Queen complete plastics set - looking for mint.
Contact:
William Gates Iii
Wilmington, Delaware
Posted: 1 March 2009
1986 - Juegos Populares - America 1492
Unidad Central De Procesos (295-001)
Unidad Drivers (295-115)
Unidad Del Sintetizador (295-216)
Need this three PCB for an America 1492 by Juegos Populares (Spain).
Note: Some others pinballs from Juegos Populares have the same PCB.
Contact:
Jorge Fernandes
voice: 966369206
Rua Dos Moinhos N.º 104 1.º Traseiras
São Mamede DE Infesta, Matosinhos 4465-689 São Mamede DE Infesta
Posted: 1 March 2009
Williams Algar, Looking for original manual and operations booklet.
Contact:
Doug Huse
voice: 860-488-0169
New Milford, CT
Posted: 1 March 2009
WTD: LAST ACTION HERO Cabinet TOPPER
ROLLING POLICE LIGHT BAR
has to be working.. condition may vary based on cost (dont want to pay allot for a brand new mint one) willing to have a working one that may have flaws (my machine is not mint so I dont care) BUT IT MUST WORK FINE.
thanks for any help with this or any leads
Contact:
Kenny
voice: 703-209-3234
Vienna, Virginia 22181
Posted: 1 March 2009
last action hero data east. I am looking for a last action hero playfield complete or mostly complete. Would also consider a cabinet and playfield, no boards, let me know if you got anything.
Contact:
Mike
Posted: 28 February 2009
Terminator 2: I am in need if a headbox to a Terminator 2 pinball. Decals would also work. Any help would be appreciated.
Contact:
Mike
Posted: 28 February 2009
Need a Flash Motor Unit or the wiper fingers (5) for a Bally Space Time machine
Contact:
Dan Allison
Posted: 27 February 2009
United Star Slugger: Looking for a head for a United Star Slugger or Super Star Slugger. Can trade or buy outright.
Contact:
Jack Gordean
Acton, CA 93510
Posted: 26 February 2009
1991 Data East Star Wars 520-5003-03 CPU does not need to be complete. None hacked though.
Contact:
Bruce
Posted: 25 February 2009
Looking for a 520-5003-03 Data East CPU. board itself needs to be in good condition, however if its not complete for a decent price I will be interested. No hacked up or bad acid damage.
Contact:
Bruce
Posted: 25 February 2009
Looking for complete playfields for a Williams Grand Lizard and a Stern Flight 2000. Mine have a bit of wear on them.
Contact:
Bob
Royal Palm Bch, Florida 33411
Posted: 25 February 2009
Looking to buy score card sets for any of the following games. Let me know what you have and what you want for them.
Gottlieb EM's:
Bowling Queen
Sing Along
Slick Chick
Sweet Hearts
Sky Line
North Star
Royal Guard
Cross Town
Flip-a-Card
Ice Revue
Sky Jump
Central Park
Flying Carpet
Jacks Open
Top Card
4 Square
Gigi
Kings & Queens
Buckaroo
Williams EM's:
Heat Wave
Big Deal (1963)
Trade Winds
Zig Zag
River Boat
Space Ship
Teachers Pet
Soccer
Big Daddy
King Pin
4 Roses
Contact:
Glen Peters
voice: (714) 745-1783
So. CA.
Posted: 25 February 2009
1978 Bally Star Trek backglass needed. If any one has any other parts contact me.
Contact:
Frank
Waco, TX United States
Posted: 24 February 2009
Need the two metal S/I card holders for a Williams woodrail with wooden lower arch. There is a small one that goes on the right side of the arch, and a larger one that goes on the left side. They are mounted to the arch with wood screws. Specifically, I need them for a Williams 'Reno' which is from 1957. There are several other models that will apply. I can pick them up at the Allentown show in May. No scammers. You're not fooling anybody.
Contact:
Joe
Posted: 24 February 2009
I have a late 1970s Pompeii bowling game that has a broken piece to the #2 pin, it's a plastic arm that retracts the pin upward, almost a half moon shape with a spring on it with an arm that has a curved piece on the other end.
Contact:
Christopher Hoffman
voice: 716-863-8554(cell)
234 Pleasantview Dr.
Lancaster, NY 14086
Posted: 24 February 2009