Rick Pittman
Posted: 27 June 2009
WTB: 1957 Williams DeLuxe Official Baseball need base runners and cardboard spectators. Is anyone reproducing these parts?
Contact:
Mark Hartman
9 Silver Lm
St Louis, MO 63122
Posted: 27 June 2009
1967 Bally Rocket III (pinball machine) backglass
Contact:
Timothy Benko
Po Box 216
South Plainfield, NJ 07080
Posted: 26 June 2009
1991 Williams Terminator 2 Playfield
Still looking for a replacement playfield for the above game in my collection. Something NOS or gently used that would require minor touch-ups and clearcoat. Appreciate any leads or help, I really want to make this game special for my son.
Contact:
Jim Crismale
Posted: 26 June 2009
Looking for parts for 1993 Indiana Jones pinball
- biplane assembly including brackets and light boards
- fighter plane
- plastic set
Also looking for spare parts for some of my other machines
CFTBL, Getaway, Flintstones, Starship, Judge Dredd, Roadshow, STTNG, Hook, Checkpoint, F-14, TZ, you can email me with any parts you may have or call me.
Contact:
David
voice: 519-809-0650
Posted: 25 June 2009
Gottlieb '76 Royal Flush playfield, worn playfield OK.
Just looking for something reasonably flat and straight without water damage. Paint wear is OK, need not have parts on top or bottom either.
Contact:
Jody Lobert
voice: 724-494-4530
Gibsonia, PA 15044
Posted: 24 June 2009
In need of the head locking mechanism for a Big Game pinball by Stern. It's the bar that goes across the inside top of head with associated hardware.
Contact:
John Clements
voice: 919-859-2321 or 919-255-0789
Raleigh, NC 27606
Posted: 24 June 2009
I am looking for an unbroken ramp from a Space Shuttle.
Also looking for a set of glowing bones for Scared Stiff.
Contact:
Hugh McCreight
Posted: 23 June 2009
Sega EM Manuals
Looking for the following SEGA EM manuals. Would also be interested in any other paperwork (invoices, service bulletins, flyers, etc.) for the SEGA EM games (1966-1976)
Sega Dodgem Crazy manual
Sega Derby Day manual
Sega Five StarQ manual
Sega Jumbo manual
Sega Invaders manual
Sega Jockey Club manual
Sega Ascot manual
Any other other Sega EM service bulletins, old invoices, etc
Contact:
Derek
Posted: 23 June 2009
TAXI SPINOUT RAMP. New preferred, but used and in good shape OK too. Will even consider with some cracks or breaks. (Mine is very bad. need something better). Send pic or description and price.
Contact:
Bruce
Posted: 22 June 2009
Looking for a playfield for a Bally Eight Ball Deluxe. Any condition.
Contact:
Steve
Florida
Posted: 21 June 2009
I'm after a Williams 1979 Flash playfield only. Looking for just the playfield but if the field has the mechanics on it I will take it as is. Looking for a playfield which is a 7 out of 10 or higher. I am in the restoration bussiness and need a quick respone time on this part. Please call me ASAP and ask for Clayton.
Contact:
Clayton Thibert
voice: 519-981-3488
3645 St Patrick's Dr
Windsor, Ontario N9E 3H6 Canada
Posted: 20 June 2009
Looking for Demolition Man plastics set. Complete or partial.
Contact:
Alan
Posted: 20 June 2009
I am looking to purchase a 1960 Gottlieb Flipper playfield. A playfield in any condition is worth discussing, but the better the condition, the more I am willing to pay.
Contact:
Mark Niemkiewicz
Allentown, PA
Posted: 19 June 2009
Bally Paragon pinball machine 1979 NEED MPU board light corrosion repairman \OR new board
Contact:
Marion Sampson
115 Lake St
Auburn, Me 04210
Posted: 18 June 2009
Need center plastic B-16411 and kicker a-16414-L for Lucky Hand-Jacks open.
Kicker Plastics also for Vagabond.
Contact:
Al Johnson
WI.
Posted: 18 June 2009
Looking for an Eight Ball Champ playfield plastic set in decent condition (still actually, these seem difficult to come by)
Have a Williams Space Shuttle playfield in so so condition I'm parting out for trade? Let me know if youd be interested in something like this. Has all coils, wiring and apron, some plastics missing but the ones here are in relatively ok state. Ramps are good. Shuttle is there but it has some stickerdamage and looks like it spent most of its life in a nicotine heavy environment. If that doesn't work for you, please quote me a price for the plastics.
Contact:
Jorgen
625 Joann
Somerville, TN 38068
Posted: 17 June 2009
Stern Dracula, looking for a playfield in nice condition, and may be interested in other parts as well.
Contact:
James
Portland, Ont. Canada
Posted: 16 June 2009
Looking for a really nice Bally Cybernaut complete, working or not working ok, Or just a really nice playfield.
Contact:
Chuck Sanderson
voice: 314-280-9299
IL
Posted: 15 June 2009
Need a rebound board for a Williams Alpha puck bowler.
Contact:
Bob Graham
Columbia, TN 38401
Posted: 14 June 2009
I need a playfield plastic set for a 1972 Gottlieb JUNGLE. I need the complete set, but will take individual pieces.
Contact:
Larry Graese
voice: 7274187468
11610 Murray Ave
Largo, FL 33778
Posted: 13 June 2009
Looking for:
Williams, playfield apron for Tales of The Arabian Nights
Williams TERMINATOR 2 plastic set, full or partial
Contact:
Jan
voice: 207-432-1482
Posted: 13 June 2009
Desperately need 2 Merkle Korff Flexo-Action motors (they have the round gearcase). They are from the 1930-50s. Both are 25 volt and one is 4.6 rpm and the other is 20 rpm. I'll pay at least $100 each for these, so please check and se if you can help me.
Contact:
Jim Anderson
Posted: 13 June 2009
1964 Williams Heat Wave backglass looking for one of the reproductions
Contact:
Pete Cooley
Huntington Beach, CA
Posted: 12 June 2009
Game Plan cocktail pin Fan-Blower unit or any other Fan-Blower unit that will work in my Game Plan Star Trip. Also looking for a Game Plan chime unit. Let me know what you got.
Contact:
Eric Jaeger
voice: (808) 987-5247
25011 Frampton Ave. #6
Harbor City, CA 90710
Posted: 12 June 2009
Looking for a NOS or a used Stargate Playfield in excellent or better condition.
Contact:
Mark Pegram
voice: 513-759-0396
5892 Franklin Trail
Hamilton, Ohio 45011
Posted: 12 June 2009
1990 Bally Game Show Looking for an NOS or good used Bally Game Show playfield. Would also be interested in NOS plastics. Email with what you have and an asking price.
Contact:
Tim Maleck
Austin, TX
Posted: 11 June 2009
Looking for parts for my Midway Dog Fight. Sound Board Gun parts Art work.
Contact:
Dan Moore
Hunter
Ottawa, Ontario
Posted: 11 June 2009
Want to buy a nice used or NOS Apron for my whirlwind
Contact:
Jon
Posted: 11 June 2009
1993, Jurassic Park. Looking for a light box topper.
Contact:
Steve
Jacksonville, FL 32259
Posted: 10 June 2009
Looking for a plastic set for 1977 Gottlieb Solar City plastic set in good or mint condition.
Contact:
Vinny
Ohio
Posted: 9 June 2009
Parts Needed for 1995 Bally Who Dunnit Pin. Any condition considered! Parts as follows:
Who Dunnit Pinball slot machine assembly
Security chip for Bally Who Dunnit
Dot Matrix Controller Board = A-14039.1
WPC Security CPU Board = A-17651-50044
Fliptronic II Board = A-15472
Power Driver Board = A-12697-4
Tony’s Palace Plastic
Who Dunnit Translite
Ideally would like to source from NZ or Australia or possibly US, depending on shipping!
Contact:
Duncan
voice: 006421443862
Christchurch New Zealand
Posted: 9 June 2009
Wanted: Gottlieb Miss Annabelle (1959) parts, playfield & backglass animation plastics, coin door with working coin accepter mechanism.
Contact:
Pinballphreak
Posted: 9 June 2009
1985/86 Bally Motordome Sound Board
Contact:
Gary Kiehl
voice: 559 441-1111
1231 N Blackstone
Fresno, CA 93703
Posted: 8 June 2009
Looking for ONE plastic from TOTAN (Tales of the Arabian Nights).
It is large the one that sits above the lock switches, behind the lamp. I 'think' it may be known as the Harem plastic ( unsure). It is purple at the bottom, has the lady in the middle and is yellow on its upper left.
Contact:
Mark Watson
Australia
Posted: 8 June 2009
WANTED: 1988 Williams Taxi Spinout Ramp, Part R-12262. New or used in good condition (ramp with cracks or breaks will also be considered). Send picture, if possible, and price.
Contact:
Larry
Posted: 8 June 2009
After a Indiana Jones playfield with minimal wear, can organize pickup from any State in the USA, missing coils, plastics etc is okay.
Email me with a price.
Contact:
Michael Shalhoub
Sydney Australia
Posted: 3 June 2009
Complete 10,000 point relay unit for a Gottlieb Sunshine 1958.
Have just rebuilt the entire game and the complete unit has been hacked out.
Contact:
Tony Mather
Posted: 3 June 2009
Looking for:
Spook House Ramp for Williams Cyclone
Gun Handle for Williams Terminatot 2
Tombstome Assy for Data East TFTC
Please shoot me a mail if you have any of the above parts for sale.
Contact:
Hagen
Posted: 3 June 2009
1959 Williams Pinch Hitter: Looking for a coil which may have been used on several different machines. The number is M34-3100. It says it's a lock relay. any other parts for this machine considered as well.
Contact:
Mike
Austin, Texas 78745
Posted: 2 June 2009
Wanted:
Plastic set for Gottlieb Sky Jump.
Plastic set for Gottlieb 2001.
Individuals or complete. Must be unbroken.
Contact:
Jason Rufer
Cokato, MN 55321
Posted: 1 June 2009
Wanted Evel Knievel pinball head unit without back glass. Or just the power-supply, number displays and all circuit boards. I live in Tampa Florida and my contact number is 813-240-6590.
Contact:
David Collins
11209 Donneymoor
Riverview, Fla 33569
Posted: 1 June 2009
Looking for any/all parts for Who Dunnit. Any help is appreciated.
Contact:
Duncan Booth
Christchurch New Zealand
Posted: 30 May 2009
Hi all, I am located in Melbourne, Australia and am looking for any Bally solid state pinball machines or parts you have for sale. I have almost finished a Bally Rolling Stones and am looking for a new project to start, any machine and in any condition will be considered, will pay a fair price.
Contact:
Tony Tanti
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
Looking for a replacement playfield for my 1979 Bally Harlem Globetrotters, must be of clean condition with no or little ware, will pay for all costs including shipping and handling fees.
Contact:
Tony
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
I am looking for playfield plastic for my Flying Carpet pinball machine. Please email me your selling price if you have the plastic of A-13579 & A-13582.
Contact:
Eddy
1427 Marigold
Upland, CA 91784
Posted: 29 May 2009
Looking for Silverball Mania parts (plastics and playfield), Super Sonic Parts (playfield). Williams Bad Cats playfield and wishbone ramp, Mr and Mrs Pacman Bumper Caps. Let me know what you have available for these machines.
Contact:
Steve Orringer
voice: (919)965-8370
487 Herring Road
Princeton, NC 27569
Posted: 25 May 2009
Would like to purchase a Williams Firepower / Fire Power back glass/ backglass.
If you have one in 'great shape' (a nick or two is O.K.). please contact Tom at 404-966-2051 to discuss pricing and terms for shipping to Marietta, GA (Atlanta), zip 30067.
Contact:
Tom Grizzard
voice: 404-966-2051
470 Timberlea Lake Dr SE
Marietta, GA 30067
Posted: 25 May 2009
I am looking for an unbroken left slingshot plastic for a Gottlieb Raven. I would also buy a good used set pf playfield plastics or a new old stock set of plastics for it.
I am looking for a nice playfield apron (yellow) for a Gottlieb Totem.
Contact:
Richard Strunks
Fort Smith, Arkansas
Posted: 24 May 2009
WANTED: I am looking for a United Hawaii bingo backglass.
Contact:
Alan
Posted: 24 May 2009
1994 Freddy: A Nightmare on Elm St. I need the plastic boiler that's in the upper right side of the playfield. Could also use a hand / claw due to broken blades.
Contact:
Mark
MI 49417
Posted: 23 May 2009
1988 Data East 'Time Machine'
Looking for:
Starwarp ramp assembly
slingshot plastics
lane guide plastics.
Contact:
Elliott Segelbaum
Posted: 22 May 2009
Looking for 2 Bally 6 digit diplays for my Kiss Pinball. Must be clean with no burns of course. Preferably something reasonably priced.
Contact:
Shawn Yuzik
Lloydminster, Ab Canada
Posted: 22 May 2009
Looking for a backglass (in very good condition or better) for a Williams Friendship 7 pinball machine. One of the Shay Group's reproduction Friendship 7 backglasses would be great as well.
Contact:
Mark
Rochester, NY
Posted: 22 May 2009
Looking for a Stellar Wars playfield to replace one in a working machine that is badly worn.
Contact:
Bill
Philly Suburbs, PA
Posted: 22 May 2009
Looking for playfield plastics for Volley, Space Mission, and Expressway.
Contact:
Ray Weaver
Wyomissing, PA
Posted: 22 May 2009
Looking for project machine. Paying Cash. Would like Williams. Any condition! Also looking for Williams Beat Time.
Contact:
Robert
Hazleton, PA 18201
Posted: 22 May 2009
Wanted. A backglass for a 1960s Chicago Coin 'Criss Cross Pop Up'.
Contact:
Bob
voice: 570-506-3141
Williamsport, PA. 17701
Posted: 22 May 2009
Looking for 1968 Gottlieb Funland BACKGLASS in excellent/mint condition.
Contact:
Greg Theis
Davenport, IA
Posted: 21 May 2009
Looking for nice condition 'Champion' backglass. This is a basketball pin made in 1949 by Chicago Coin. Hope someone has it.
Contact:
Gary
voice: 8609511869
Posted: 21 May 2009
Eight Ball Deluxe MPU board and Sound Board.
Contact:
Rick
Atlanta, GA 30319
Posted: 20 May 2009
Looking for 1979 Williams Stellar Wars play field (new old stock) or used in good shape.
Contact:
Duane
voice: 440 346 0477
Cleveland, Ohio 44146
Posted: 20 May 2009
1947 Chicago Coin Sea-Isle backglass. I like this game, playfield is really nice but it looks silly without the backglass. I hate to sell it off.
Contact:
Dan Burfield
Posted: 18 May 2009
Williams Space Odyssey backglass
Bally Zip-A-Doo lower right slingshot plastic. Will take entire set if necessary.
Backdoors for 1970s Williams 4-player games, 25-1/4"W by 27-3/4"H. I need two.
Contact:
Daina Pettit
voice: 801-277-6296
Salt Lake City, Utah 84117
Posted: 18 May 2009
1972 Bally Time Zone backglass. I've completely restored this machine, all except the backglass. I've exhausted my connections and I think Pacak doesn't have one either. If anyone has one or a lead on Bally backglasses, let me know.
Contact:
Dan Burfield
Posted: 18 May 2009
1980 Gottlieb "Time Line" Backglass, I have an ugly one and need a nice one. doesnt have to be perfect just nice.
Contact:
Paul
Otisville, NY
Posted: 18 May 2009
Cirqus Voltaire playfield, any condition.
Contact:
Brian
Walled Lake, MI 48390
Posted: 18 May 2009
I am looking for the following three Star Wars Data East parts. Anyone know where I can order them?
Left Sling (storm trooper)
Lower Death Star Entry Right (Bobba Fett)
Jabba Bount
Contact:
Kelley O'brien
NC
Posted: 17 May 2009
Wanted Complete Ball Loader and Balls for a Williams Hyperball
Contact:
Nick
935 Wales Ridge Road
Wales, Michigan 48027 USA
Posted: 17 May 2009
I am trying to repair a STERN Power Driver Board and I need the following two parts 22NE10L STP transistor and U-1 which is a 74HCT273 Can anyone help me find these?
Contact:
Max Phillips`
El Reno, OK
Posted: 16 May 2009
I need High Speed II: The Getaway parts.
Looking for the Accelerator board (Controls the supercharger magnets and is found under the playfield) and the optic board for the supercharger.
Contact:
Andrew
Logan, UT 84321
Posted: 16 May 2009
1992 Data East Star Wars translite.
Want an ORIGINAL translite for a DE SW. Must be factory original and NOT a reproduction. Preferrably NOS or excellent condition.
Would also be willing to do an exchange for a Repro translite + $ .If you're an operator who has a SW on site with a excellent translite this may be of interest to you.
Please send details and clear pics of BOTH sides of translite if interested.
Contact:
Scott
Nsw Australia
Posted: 15 May 2009
I need Parts for Old Coney Island (Platine MPU - 2)
Contact:
Herrnstein Thomas
voice: 0043/650/2307434
Eulenweg 3
Feldkirchen In Kärnten, Austria 9560
Posted: 15 May 2009
WTB: backglass for '76 Gottlieb Surfer. Looking for 8/10 or better.
Contact:
Lee Wilk
voice: 410-461-6866
79 Bryans Mill Way
Catonsville, MD 21228
Posted: 15 May 2009
Indiana jones pinball part lower playfield idol assembly with optos. Don't need gold idol.
Contact:
Robert
Fla
Posted: 14 May 2009
1993 Bally Judge Dredd 'Pursuit' plastic light shield
Contact:
Keene Silfer
Posted: 12 May 2009
Looking for a used CPU board for a Paragon Bally machine as-2518-35. Dont really wanna spend the money on a new board (didnt pay too much more for the machine years ago) as I am not 100% sure this will fix it.
Contact:
Steve Bearden
806 Gordon St.
Longview, Texas
Posted: 12 May 2009
Gottlieb Jungle King backglass, must be 9.5/10 or better.
Contact:
Joe
Posted: 11 May 2009
Need the 2 cars for the spinner on the MARIO ANDRETTI pinball game, if you have one or both PLEASE contact me.
Contact:
S Hull
Ohio
Posted: 11 May 2009
Looking for lower cabinet, playfield, and relay board (complete bottom section) for a 1964 Gottlieb North Star. Playfield should be good to very good condition and complete. Ok if cabinet is less than good.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 11 May 2009
Looking for playfield for 1975 Gottlieb Pin-Up. Looking for very good to excellent condition (no paint loss). Missing parts is okay, but should not have badly hacked wiring.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 11 May 2009
Looking for the Gottlieb Asteroid Annie playfield which was at the Allentown show inside the hall entrance on Sunday. If you picked this playfield up, and would like to sell it, please contact me.
Otherwise, I'm looking for an Asteroid Annie playfield. Prefer one in nice usable condition. Playfield can be stripped, semi-populated, or fully populated.
Contact:
Jim P.
voice: 717-564-1032
Near Harrisburg, PA
Posted: 11 May 2009
Williams reverse wedgehead cabinet, excellent original shape only. Parts games are OK, or just the cabinet. Let me know.
Contact:
Joe
Posted: 11 May 2009
Ballt Time Zone. Looking for a Nice Backglass, little or no flaking and no fade.
Contact:
Rick
WI
Posted: 10 May 2009
I'm looking for a Terminator 2 plastics set. Preferably NOS or a quality reproduction. Will consider a used set if its in near-mint condition (minor warping, absolutely no cracks).
Contact:
Bill Deleo
CT
Posted: 10 May 2009
Looking for a Williams OXO backglass in decent shape. Repro welcome.
Contact:
Kaspar Obeli
voice: +41765264276
Thun Switzerland
Posted: 10 May 2009
Looking for the small center plastic on Aztec playfield.
Contact:
Rick
WI
Posted: 10 May 2009
WANTED - Bally Expressway paperwork - schematics, S/I Cards, etc. Also looking for clean - 25c coin door plastic inserts.
Contact:
Don Owen
Baltimore, MD 21737
Posted: 10 May 2009
1995 Bally Attack from Mars backbox lighting behind translite
I know this is a long shot, but I need the white plastic part that holds the lights behind the translite. It's about 3'x 2' and is about 2 inches deep. Need the wiring harness that goes with it too. If you have a trashed AFM you're parting out, let me know.
Contact:
Ron Kral
voice: 703 478-0077
Reston, VA 20194
Posted: 9 May 2009
Williams pinball parts wanted for Travel Time or early 1970s games. Also looking for williams project machine.
Contact:
Robert
Walnut
Hazleton, PA 18201
Posted: 9 May 2009
1963 Gottlieb Slick Chick- looking for a lock down bar and upper and lower aprons in nice shape. Email with price.
Contact:
Tom Drum
Port Matilda, PA 16870
Posted: 8 May 2009
I am looking for parts for my Williams Rollergames pin. Looking to rebuild it, so anything you have may work. Please let me know.
Contact:
Travis Bruehl
Deltona, FL 32738
Posted: 7 May 2009
I am looking for side art for a Terminator 2 pinball machine. I could make due with just the left side but certainly will take an entire set if it is available
Contact:
Gil Helms
Posted: 4 May 2009
Gottlieb score and instruction cards for FOTO FINISH and HAPPY CLOWN
Contact:
Tony Mather
Posted: 3 May 2009
I am looking for some plastics for Alien Poker. Specifically the top right arch plastic and any other you might have in great shape. I would buy a complete set for the right condition.
Contact:
Bill
Posted: 3 May 2009
I am parting out a 1948 Chicago Coin Football machine. Art glass is gone, all other parts available. If interested please contact me by email for details.
Contact:
Tim Kryzer
voice: 651 737 4269
4365 Little Bluestem Trail North
Lake Elmo, MN 55042
Posted: 3 May 2009
Looking for the dust cover that fit on all play lights on Bally XENON game. Thay are color tubes yellowish red reddish pink. Need all of them can you help?.
Contact:
Joe Fuller
voice: none, fax: none
Meadow Glen Dr
Elkhart, IN 46516
Posted: 3 May 2009
Looking for a mint or near mint Gottlieb 'full' apron and the smaller apron that covers the 'shooting plunger' for my 1977 Sure Shot. Excuse my terminology. I'm a novice in world of pinballs.
Contact:
Bill Rabara
voice: 419-349-1035, fax: 734-847-4560
7443 Bridgeway Dr.
Temperance, MI 48182
Posted: 2 May 2009
1974 Gottlieb Sky Jump NOS or nice used playfield. Email with price and condition. Will pick up in Allentown or ship.
Contact:
Tom Drum
Port Matilda, PA 16870
Posted: 1 May 2009
1979 Bally Space Invaders I need decent plastics for a Space Invaders. The right slingshot is broken in half, and the rest have major bowing even after being heated and flattened. Email with what you have and an asking price.
Contact:
Tim Maleck
TX
Posted: 1 May 2009
Wanted: head unit of a Flash game (head cabinet, wiring, displays and boards; no BG needed).
Contact:
Steve Price
Grand Rapids, Michigan USA
Posted: 1 May 2009
Does anyone have a Ted's head from Road Show, if so please contact me.
Contact:
Annette Kennedy
voice: 02 98341919
8 Utah Place
Erskine Park, NSW Australia 2759
Posted: 1 May 2009
Looking for a Gottlieb PANTHERA backglass as close to mint condition as possible.
Contact:
Ken Orr
voice: 503 788 4213
Portland, Oregon 97266
Posted: 30 April 2009
1947 Chicago Coin 'Pistol' gun game Backglass
Looking for an original or reproduction.
Please let me know if you know where I could have them made.
Contact:
Rich
voice: 209-648-8403
Sonora, Calif. 95370
Posted: 27 April 2009
I am looking to buy these gun games. 1963 Chicago Coin RIOT GUN, 1969 Chicago Coin SUPER CIRCUS with 8 track & audio, 1976 Chicago Coin CONEY ISLAND, 1969 Williams SPOOKS, 1970 Williams BONANZA, 1974 Midway GANGBUSTERS, 1974 Kasco UNTOUCHABLE
Contact:
Chris Cragg
voice: 805-938-0799
Posted: 27 April 2009
1965 Williams Big Chief. Looking for the selector disc plastic. It is at the upper left top of the playfield.
Contact:
Jimmy Hefner
voice: 405-659-0563
3150 NW 24th St
Okc, OK 73107
Posted: 26 April 2009
1976 Playmatic Fandango backglass: It does not need to be in mint condition. Good or better would be fine.
Contact:
Robert Mem
Oakland, CA
Posted: 25 April 2009
I need a part for my Johnny Mnemonic pinball. Someone told me the part I need is called the Ramp Protector. I have a link to the picture. It's over the left ramp for the Johnny Mnemonic pinball. I also need the decals or stickers for that piece.
Contact:
Steve
CA 91301
Posted: 25 April 2009
Wanted:
Frontiersman plastics, and other parts
Jungle Lord backglass
Rockmakers backglass
Contact:
Steve Price
Grand Rapids, MI
Posted: 24 April 2009
Looking for Gottlieb Crescendo Backglass in 8+ condition.
Looking for Chicago Coin Casino Backglass in 8+ condition.
Contact:
T.bouwkamp
Niles, MI 49120
Posted: 23 April 2009
1985 Gottlieb Bounty Hunter Sound Board with daughter board
Williams High Speed backglass
williams Big Deal (EM) backglass
Contact:
Wayne's World Of Home Amusements
voice: 386-748-4946
163 North Frederick Street
Pierson, Florida 32180-2380
Posted: 21 April 2009
Wanting Freds Choice Plastic 'A' off a Flintstones.
Contact:
Peter
William
Melbourne, Vic 3147
Posted: 21 April 2009
1969 Williams Miss-O: Looking for a backglass in decent condition. Can pick up at Allentown show.
Contact:
Terry
Posted: 20 April 2009
WANTING: head box decales for a Flintstones.
Contact:
Peter
William
Melbourne, Victoria 3147
Posted: 20 April 2009
For a 1959 Gottliebs Queen Of Diamonds. Still looking for the Mechanics board, located on the very bottom of the main cabinet. It contains the Score Motor, Transformer, as well as a variety of Relays and Contacts. The unit that controls the action of the Spinning unit behind the back glass is missing. I thought I had one located. It turned out to be an offer from some jerk in the west indies. I asked him if the wood on this unit was painted Red. He said he had a red one for sale. Any help will be greatly appreciated. They are out there, you have to be careful.
Contact:
Bill
voice: 203-734-1076
CT
Posted: 19 April 2009
1978 Bobby Orr Power Play - Right slingshot plastic (American Flag)
Contact:
Barry Harper
Canada
Posted: 17 April 2009
For pick up at Allentown:
Gottlieb Surfer cabinet/parts game
CCM Funland rifle (or any mid 70s CCM rifle);
United Bowling Alley (1956 ball bowler) backglass;
GTB Top Score/300 playfield;
WMS Olympic Hockey plastic (top left);
GTB Scuba plastic (with the octopus on it);
WMS Touchdown Cabinet (with original art);
BLY Expressway (or similar) head (just the backbox, no guts);
WMS ANY 1960 cabinet bottom(funky 'front shelf' style);
Backbox 1968 2 player Bally;
Cabinet for Wms Lady Luck (with original art);
GTB Grand Slam Cabinet (with original art);
GTB Big Hit motorboard.
GTB 1962 Cabinet bottom
GTB Soccer cabinet with original artwork
Contact:
Mark C. Roller
voice: (863) 206 5402
Posted: 17 April 2009
I need a set of nos Terminator 2 pinball decals or a reproduction set
Contact:
Alex Brown
New York
Posted: 17 April 2009
I need a Willaims palisades wiring diagram in good condition or new/reproduction
Contact:
Alex Brown
New York
Posted: 17 April 2009
Zaccaria Magic Castle backglass
Contact:
Massimo
Milano - Italy
Posted: 17 April 2009
Looking for a NOS Data East Star Trek 25th Anniversary ramp.
Also Looking for a NOS Williams Star Trek TNG klingon ship.
Contact:
Marco
Australia
Posted: 16 April 2009
Weird request here, but does anyone have measurements/specs of late 70's Bally Cabinets? Need to reproduce one and any help would be appreciated for some good measurements, specs, etc.
Contact:
David
Posted: 16 April 2009
Alca Target UFO Electo-mechaical arcade schematics and manual wanted
Contact:
Jack Gordean
Acton, CA 93510
Posted: 15 April 2009
I'm looking for a 1985 Williams Sorcerer backglass.
Contact:
Dave Baumann
Posted: 15 April 2009
Looking for parts for 1950 Dale/Exhibit Supply Six Shooter gun game
1) Backglass in good condition mine has crack in corner, but still presentable.
2) Back Door
3) Front Coin door
4) Score & Instruction cards
Contact:
Moe
Posted: 15 April 2009
1952 Gottlieb Queen of Hearts coin box
Contact:
Ronald Swatski
Posted: 14 April 2009
Looking for a wiring harness for a Bally Eight Ball Deluxe pinball. Need the playfield to circuit boards wiring harness.
Contact:
Steve
Florida
Posted: 11 April 2009
Looking for a backglass for a Williams Pit Stop. Any condition considered. Please let me know price and condition.
Contact:
Brian Williams
voice: 920 565-3021
N9358 Franklin Rd
Elkhart Lake, WI 53020
Posted: 10 April 2009
Williams/Sonic gate: Looking for the solenoid operated gate (the gate, not the solenoid) for Sonic Faces. It is Williams part A-4817-L-Modified.
Contact:
Bell Springs Pinball
Posted: 10 April 2009
Looking for a backglass for a 1976 Space Odyssey pinball machine.
Contact:
Blake Ausbrooks
voice: 580-772-6559
1533 Saber Lane
Weatherford, OK
Posted: 8 April 2009
SAM II, Stern Service Assistance Module II. I've run across one of these factory test fixtures. Is anyone familiar with these units? Does anyone have an operating manual? Any relavent information would be greatly appreciated.
Contact:
Steve
Jacksonville, FL
Posted: 7 April 2009
1969 Bally Space Flight 'Front to Rear' Trolley Motor and/or Parts Machine Needed ASAP! The motor runs but the gearbox is not operating. Parts machine also seriously considered if motors are working. Will pay! Will pay!
Contact:
Fred Bobrow
voice: 917-887-3554
Posted: 6 April 2009
1978 Bally Star Trek bottom cabinet needed. In the Texas and surrounding states area.
Contact:
Marc
Texas
Posted: 6 April 2009
Looking for a decent lower apron for a Gottlieb Add A Ball game, any one will do from the 70's.
Contact:
Joe Grenuk
Posted: 6 April 2009
PLAYFIELD PLASTICS NEEDED:
Williams Jokerz: left slingshot
Data East Star Trek: The girls that go over each slingshot plastic
Williams Firepower: The plastic that goes over the right-center target bank, over targets 4,5,6.
Used but uncracked is fine. Repros are fine.
Contact:
Mike
Posted: 6 April 2009
1973 Gotlieb Hot Shot playfield plastics, nice condition but not broken
A-14604-R
A-14604-L
C-14606
C-14605
Center piece under the bumper (don't have number)
Contact:
Robert Tepper
voice: 352-382-1841
FL 34446
Posted: 5 April 2009
1999 Bally Revenge from Mars 'kit'
Looking for the complete conversion package to be able to convert my Star Wars Episode I. Allentown delivery ok if not local.
Contact:
Jim
Bergen County, NJ
Posted: 4 April 2009
1988 Williams Cyclone Ferris Wheel Ramp-useable condition.
Contact:
Chris Dixon
Bc Canada
Posted: 3 April 2009
I am looking for any information on the Bally add a ball kits. I have a MiniZag 1968 Bally that has an option to add the cable and kit for add a ball. Do you have a print with it on there? Any information will be helpful.
Contact:
Bob Graham
Columbia, TN 38401
Posted: 3 April 2009
Looking for a Qberts Quest backglass. Prefer an 8 or better out of ten. Will consider others.
Contact:
Brian
Posted: 3 April 2009
Wanted spare parts for Atari's Hercules. Let me know what you have.
Contact:
Brian
Posted: 3 April 2009
Parts wanted for DE Robocop: plastic set for lower playfield or at least plastics for slingshot bumpers, laserkick, and center guard directly underneath middle popbumper.Also need the blue plexiglass piece in top right corner of backbox where it says 'in digital stereo'. Plastics must be in very good condition at reasonable price.
Contact:
Mike Myers
Posted: 2 April 2009
Williams Pharaoh: Looking for Chamber plastic
Contact:
Todd Svec
Sparks, NV 89436
Posted: 2 April 2009
Looking for glass and coin door for Big Daddy Williams pinball machine.
Contact:
William Trulock
Posted: 2 April 2009
1965 Bally Deluxe Fun Cruise or Gay Cruise backglass or entire machine in excellent condition.
Contact:
Randy
Long Beach, CA
Posted: 1 April 2009
Apron or card tray for 70's Gottlieb Add a Ball. Also, need arch cover (the part at the top of the playfield that has the serial number attached to it)
Contact:
Jack
Atlanta, GA
Posted: 1 April 2009
Looking for Kings of steel parts. I need the plastic center target, and the plastic piece that goes over the center target from post to post.
Contact:
Kevin
Spring Grove, IL
Posted: 1 April 2009
Williams Black Knight 2000 Short habitrail 'tube' which drops the ball from below the flipper on the upper playfield onto the lower playfield
Contact:
David Dutton
20 Station Road
Marsden, West Yorks Hd7 6dg
Posted: 1 April 2009
Gottlieb score and instruction cards for HAPPY CLOWN and THORO-BRED.
Contact:
Tony Mather
Posted: 31 March 2009
Looking to buy an EM arcade game. I would rather it be non-working, but will consider working ones as well. Please email or give me a call.
Contact:
Randy
voice: 757-868-4304
Poquoson, VA 23662
Posted: 30 March 2009
1962 Williams Tradewinds Trade Winds Pinball backglass wanted. Any condition. Also advise if any other parts available. Also looking for a complete Tradewinds machine in good condition.
1963 Gottlieb Swing Along backglass wanted.
Don't want to sell? I also have other backglasses for trade - Baseball pitch and bats Official Baseball and Pinch Hitter, GTB Kings and Queens, and WMS Heat Wave.
Contact:
Don Klein
San Juan Capistrano, CA 92675
Posted: 28 March 2009
Bally Carnival 1957 2 Player. Looking for machine in restorable to excellent condition. Please email pics and/or call.
Contact:
Pinball Revival Company
voice: 415 883 4180
372 Bel Marin Keys Blvd
Novato, CA 94949
Posted: 28 March 2009
1981 Bally Fireball II playfield plastic set, either nice used or NOS. Email with price please.
Contact:
Tom Drum
voice: 814-692-7117
Port Matilda, PA 16870
Posted: 27 March 2009
Bad Cats Williams NOS cabinet decals game is 1999 bright orange.
Contact:
Ken White
voice: 650 400 0207
833 N Idaho St
San Mateo, CA 94401 USA
Posted: 27 March 2009
Need backglass to a Gottlieb 1970 Aquarius as well as top right playfield plastic.
Contact:
Ken Head
Southlake, Texas
Posted: 27 March 2009
I have an unused Alan Meyer repro backglass for Black Knight 2000 for sale. $350 or best offer. This is the glass with the bright red colors. Looks great.
Still in original box. Pics available on request. Shipping is available at cost. Insurance required
Contact:
Steve Hess
24 Ilinka
Irvington, NY 10533
Posted: 26 March 2009
Midway Duck Hunt. Looking for parts/photo cells/etc.
Contact:
Joe
Buffalo, NY 14220
Posted: 26 March 2009
1965 Williams Big Chief Plastic Set- mainly the upper left spinning wheel.
Contact:
Ernest Solis
voice: 830-708-2107
427 Aaron Ln
New Braunfels, TX 78130
Posted: 25 March 2009
Need 1961 Gottlieb Oklahoma backglass in good condition.
Contact:
Wayne
Posted: 25 March 2009
Want to buy Original Pinball flyers in good condition, any make, any style. Willing to pay fair price for any quantity. Email your list and price.
Contact:
Tony
Brisbane, Australia
Posted: 25 March 2009
1961 Williams Kismet Lockdown bar -- not specific to this machine. Not worried about cosmetic condition as long as it's complete. This is the lockdown bar with the removable end pieces. Believe this is identified in the 1966 catalog as D-5835 with 21B-6597(RH)+ 21B-6596(LH)
1961 Williams Kismet Swinging target assembly -- in the 1962 parts catalog this is shown as B-5839. ('66 catalog shows B-6045 and '74/'75 catalog shows B-6045R)
Contact:
Alfred Forbrich
voice: (403) 769-2113
Calgary, Alberta T2z3g9/canada
Posted: 23 March 2009
Wanted: Backglass For a 1948 United Rondavoo Any Comdition Wanted. I just Need One Shippers Broke Mine. Also I need a backglass for Data East Monday Night Football. Also need a 7 or better backglass for a 1963 Williams San Fransico.
Contact:
Gary Eggers
voice: 5074403552
2559 490th St.
Stacyville, IA. 50476
Posted: 23 March 2009
Bobby Orr Power Play and Spiderman, The Amazing (1980) playfields, with all plastics. Any condition. Drop Targets, assemblies and coils on back side are not important.
Contact:
Michael Maxwell
voice: 434-944-3691
Bedford, VA USA
Posted: 22 March 2009
Data east Monday Night Football Back Glass In Fair Useable Shape. Doesnt Have to Be perfect. Name Price with Shipping. Scammer beware. Tracker is Here.
Contact:
Gary Eggers
voice: 5074403552
2559 490th St.
Stacyville, Iowa 50476
Posted: 21 March 2009
Data East Rocky and Bullwinkle Nell Log Gear/Pulley Assembly.
Contact:
William Longo
Posted: 21 March 2009
Many items wanted: plastics for Twister pinball machine, and pinball lift/jack for easy moving/transferring of pinball machines.
Contact:
Virginia Owen
voice: 419-646-3475
15409 Old State Route 12
Columbus Grove, Ohio 45830
Posted: 21 March 2009
Wanted Adams Family Cabinet or one that I can put the game in. Can pick up at Allentown Show (on Saturday) or can drive to your location, if it's not too far away.
Contact:
Elm City Neon
voice: ( 203 ) 230 - 8300, fax: same
374 Treadwell Street
Hamden, CT. 06514
Posted: 21 March 2009
1989 Williams Whirlwind.
I am looking for the upper right Ball Guide Assembly (Williams PN A-13360). Please let me know if you have this metal piece for sale.
Contact:
Brian Wahlen
Briwn Deer, Wisconsin 53223
Posted: 20 March 2009
Looking for plastics (esp the time expander) for a Doctor Who.
Contact:
Brent Stiles
Cincinnati, OH
Posted: 20 March 2009
Looking for Friendship 7 1962 Williams Backglass, also front lockdown bar for the game.
Contact:
Bart
Oklahoma
Posted: 19 March 2009
1948 Bally Heavy Hitter original wood stand. Any condition. Please call Bert if you have one for sale.
Contact:
Bert Oppenheim
voice: 508.320.9725
Medway, MA 02053
Posted: 18 March 2009
1975 Gottlieb Spin Out plastic wanted.
1974 Gottlieb Magnotron center plastic wanted.
Contact:
Don
voice: 510-714-5589
38838 Jonquil Dr
Newark, CA 94560
Posted: 18 March 2009
1981 Williams Barracora backglass - NOS/9+ condition desired and willing to pay your price. Also have other NOS/rare parts if trades are preferred.
Contact:
Dave K.
Posted: 18 March 2009
I need electric diagram of the Far Out pinball.
Contact:
Celso Ricci
Rua Cecilia M. Gaboardi,116
Itatiba, São Paulo Brasil
Posted: 17 March 2009
Looking for a backglass for Chicago Coin Riviera, also Bally Champ 4 player backglass. Please let me know.
Contact:
Joseph Pfeifer
voice: 631 748-1279
55 Franklin Street
Amityville, N.Y. 11701
Posted: 17 March 2009
I'm looking for a Rudy lampshade for a Funhouse machine. Mine is completely missing. I need the whole lampshade assembly including the standoff piece and the plugin to plug the lamp underneath the playfield. Can anybody help?
Contact:
David Lougy
voice: (619)248-9365
2801 Capps St.
San Diego, CA 92104
Posted: 17 March 2009
Bally EM Coin door and Frame, Looking to purchase a Bally coin door and frame suitable for a 1971 Bally Odds and Even. Email me with condition and a price.
Contact:
Barry Harper
Ontario Canada
Posted: 15 March 2009
Looking for a 1979 rolling stones playfield in great shape. Also a kiss play field in great shape.
Contact:
Dino
Posted: 15 March 2009
Looking for a decent Solar Fire backglass. Will pay for a nice example. Also would be interested in Solar Fire upper and lower playfields if they were upgrades to what I have now.
Contact:
Mark
voice: 248-921-3981
Commerce Twp., Michigan
Posted: 15 March 2009
Looking for someone who restores playfields. Also looking for someone who restores pinball machines, the outside and all over.
Contact:
Dino
Posted: 15 March 2009
Need Headglass for 1947 Esco Fast Ball Pinball.Must be in very good cond.Tough item to find -if you know of a silksceen co that can handle a copy let me know please
Contact:
Robert Feeney
voice: 5169246448
Islip, NY 11752
Posted: 15 March 2009
Wanted to trade. Gottlieb legs, I have a perfectly good 31" set of 4 on my game, but my game is supposed to have 27" legs. Trade anybody?
Contact:
Greg
Posted: 15 March 2009
1984 Bally/Midway Spy Hunter pinball - backglass, playfield plastics, spinner, bumper cover, side art.
Contact:
Brad Stith
Posted: 14 March 2009
Wanted, Gottlieb Counterforce in good working condition. Will consider something that needs work. Also wanted Williams Solar Fire in good working condition. Please contact Art Johnston.
Contact:
Art Johnston
voice: 845 742 1264
Monroe, NY
Posted: 14 March 2009
1977 Bally Power Play (Bobby Orr) Right slingshot plastic (American flag) Good used condition to mint.
Contact:
Barry Harper
Ontario Canada
Posted: 13 March 2009
Hot Shots (Gottlieb 1989) NOS translite. Have lots of cool stuff to trade or can buy outright.
Contact:
-danno-
Posted: 13 March 2009
Looking for an original 1960 United Sure Fire shuffle alley schematic. Also looking for 2 triangular inserts 2 13/16 for puck or ball bowler and maybe pinball too.
Contact:
Pascal
Quebec Canada
Posted: 13 March 2009
1961 Gottlieb Big Casino - looking for a nice set of playfield plastics (there are only 2 near the flippers)
Contact:
Tony Mather
Posted: 12 March 2009
1965 Gottlieb Thoro-Bred - looking for a nice set of playfield plastics and instruction card for this game.
Contact:
Tony Mather
Posted: 12 March 2009
Looking for a 1979 Bally Rolling Stones playfield. In great shape.
Contact:
Dino
Venetia, PA USA
Posted: 12 March 2009
WTB: Williams High Speed backbox red beacon topper insides 'the flasher unit and mounting.'
Contact:
Bob Kugler
Posted: 12 March 2009
1987 Gottlieb Monte Carlo. Looking for a translite for this machine, in good or better conditions.
Contact:
Sylvain
Ottawa, Ontario Canada
Posted: 11 March 2009
1979 Game Plan Star Trip. M-120 Coctail Table Pinball Game.
I need the ribbon cable that connects the MPU-1 to the two display boards. Anyone having parts for this game can contact me, I would like a few parts.
Contact:
Lawrence Martin
voice: 408-569-2875
70 Topeka Ave.
San Jose, California Vferc
Posted: 10 March 2009
Full house or Top Hand--center plastic that covers card area
Contact:
John
Posted: 9 March 2009
Need a Backglass for a Bally Harlem Globetrotters on Tour Pinball Machine. Need a good looking one for a near completed restoration.
Contact:
Eric Shearin
982 White Level Rd
Louisburg, NC
Posted: 9 March 2009
I am looking for extra wireform ramps from 1990 - 1999 Bally/Williams DMD pinballs. Mostly looking for ramps from Indiana Jones, Medieval Madness, Theatre Of Magic, Shadow, Champion Pub, Addams Family, Tales Of The Arabian Nights. Anybody have these from parted out games, or ones that they replaced? I would also consider ramps from other games, so if you have something, check with me. I am also looking for some extras of the wire apron guards. I need some widebody ones from either a Twilight Zone, or Indiana Jones, and I also need some of the standard size ones which are very common and come on games like Shadow, Addams Family, CFTBL, Theatre of Magic, and so on. Please contact me if you have any of these pieces, and would like to sell them.
Contact:
Michael Chestnut
voice: 615 - 824 - 6116
129 Grassland Drive
Gallatin, TN 37066
Posted: 8 March 2009
Wanted:
Bally NOS playfield for Mystic
Bally NOS playfield for Supersonic
Bally NOS playfield for Hang Glider
Bally Hang Glider backglass
Contact:
John
NJ
Posted: 8 March 2009
WANTED: Judge Dredd Crane Cover Plastic (NOS or Used and uncracked)
Contact:
Fred Collins
CO
Posted: 8 March 2009
Looking for playfield plastics for the following Gottlieb games:
Hurdy Gurdy
Central Park
Flipper Fair
300
Looking for playfield plastics for Williams San Francisco.
Contact:
Mike
Carmichael, CA
Posted: 7 March 2009
1961 Williams Batting Champ, reproduction or mint backglass.
Contact:
Stuart Green
1 Edgecomb Road
Binghamton, NY 13905
Posted: 5 March 2009
Jackbot plastic one in particular in front of spiral ramp on right.
X-Files under-ramp decals old(attached or not)-new-repro or help on making some.
Let me know of any and all game specific parts for either of these games you may have available.
Contact:
Jimmy P
Posted: 5 March 2009
Looking for a copy of Stern Stars and Strikes Ball Bowler. Any help?
Contact:
Robert
voice: 740 385 0240
Ohio 43138
Posted: 5 March 2009
I'm chasing the plunger/launcher (its should be in the shape of a rod) for my Fishtales game.
Contact:
Mick
Belmont, Victoria Australia 3216
Posted: 5 March 2009
Looking for a Gottlieb Volley backglass. Your help would be much appreciated.
Contact:
Dean Pierce
Eagan, MN
Posted: 3 March 2009
WTB: Super Score/Hi Score playfield, Gottlieb.
Contact:
Joseph Colizoli
Po Box 295
Bellevue, Ohio 44811
Posted: 3 March 2009
I've been looking for an populated PF for a 1976 Gottlieb Solar City for a few years now. Can anyone help me?
Contact:
Tim
Triangle, Woodbridge, Fredericksburg, VA
Posted: 3 March 2009
Wanted, Repairible and / or parts circuit boards. I am looking for Williams Level 3, 4, 6, and 7 solenoid driver boards, early Bally Lamp and solenoid driver boards, Gottlieb system one and system 80 solenoid driver boards. MPU/CPU Boards? You must price them for what they are. The more the better to save on shipping. Let me know what you have and want. No photos nessesary. My intent is to rebuild and re-sell as a service to the preservation of pinball.
Contact:
Nabours Novelty Inc.
voice: 3209635953
320 Highway 55 West
Maple Lake, MN 55358
Posted: 2 March 2009
1977 Gottlieb Vulcan / Fire Queen complete plastics set - looking for mint.
Contact:
William Gates Iii
Wilmington, Delaware
Posted: 1 March 2009
1986 - Juegos Populares - America 1492
Unidad Central De Procesos (295-001)
Unidad Drivers (295-115)
Unidad Del Sintetizador (295-216)
Need this three PCB for an America 1492 by Juegos Populares (Spain).
Note: Some others pinballs from Juegos Populares have the same PCB.
Contact:
Jorge Fernandes
voice: 966369206
Rua Dos Moinhos N.º 104 1.º Traseiras
São Mamede DE Infesta, Matosinhos 4465-689 São Mamede DE Infesta
Posted: 1 March 2009
last action hero data east. I am looking for a last action hero playfield complete or mostly complete. Would also consider a cabinet and playfield, no boards, let me know if you got anything.
Contact:
Mike
Posted: 28 February 2009
Terminator 2: I am in need if a headbox to a Terminator 2 pinball. Decals would also work. Any help would be appreciated.
Contact:
Mike
Posted: 28 February 2009
Need a Flash Motor Unit or the wiper fingers (5) for a Bally Space Time machine
Contact:
Dan Allison
Posted: 27 February 2009
United Star Slugger: Looking for a head for a United Star Slugger or Super Star Slugger. Can trade or buy outright.
Contact:
Jack Gordean
Acton, CA 93510
Posted: 26 February 2009
1991 Data East Star Wars 520-5003-03 CPU does not need to be complete. None hacked though.
Contact:
Bruce
Posted: 25 February 2009
Looking for a 520-5003-03 Data East CPU. board itself needs to be in good condition, however if its not complete for a decent price I will be interested. No hacked up or bad acid damage.
Contact:
Bruce
Posted: 25 February 2009
1978 Bally Star Trek backglass needed. If any one has any other parts contact me.
Contact:
Frank
Waco, TX United States
Posted: 24 February 2009
I have a late 1970s Pompeii bowling game that has a broken piece to the #2 pin, it's a plastic arm that retracts the pin upward, almost a half moon shape with a spring on it with an arm that has a curved piece on the other end.
Contact:
Christopher Hoffman
voice: 716-863-8554(cell)
234 Pleasantview Dr.
Lancaster, NY 14086
Posted: 24 February 2009
1975: Bally: Blue Chip: Need the lockbar for a 1975 Bally Blue Chip 6 card bingo pinball machine. Preferablly in good shape, though Mint condition is not necessary. This is for the Blue Chip made in 1975 by Bally, not the Blue Chip produced in 76 by Williams.
Contact:
Bryan Whipple
voice: 813-679-4968
112 Lena Ann Drive
Saint Cloud, Florida 34771
Posted: 23 February 2009
Wanted: Data East CPU/MPU board version 2 or newer.
Contact:
Joy
Posted: 23 February 2009
Atari Superman lock down bar and side rails that hold glass.
Contact:
Brian Faranda
Posted: 22 February 2009
Bally Blackwater 100 any plafield ramps. Must be unbroken. Email me.
Contact:
Brian C. Faranda
Posted: 22 February 2009
I am after 1 x full set of cannes plastIcs
Contact:
Matt
Australia
Posted: 22 February 2009
Need Roto Target wheel for 1968 Gottlieb Domino.
Left sling plastic for Gottlieb Bank a Ball 1965
Contact:
John
NJ
Posted: 22 February 2009
Looking for a Gottlieb lower apron. It would come from one of the following games: World Fair, Tropic Isle, Rack A Ball, Gigi, Slick Chick, Sweet Hearts, Cover Girl, or Olympics. I believe all these games have the same apron. If you have one of these machines to part out, I just need the lower apron in good condition. Willing to pay above market value for a nice one.
Contact:
Dave
voice: 618-833-4012
IL
Posted: 21 February 2009
1994 Data East Tommy Flipper Blinders and servo motor, wanted. Also need plastic for the Union Jack area.
Contact:
Scott Henderson
Posted: 20 February 2009
1991 Williams Terminator 2 looking for NOS or near mint speaker panel. Only need the plexi glass insert.
Contact:
Paul
Burlington, N.J
Posted: 19 February 2009
I am looking for a 1980 Stern Quicksilver playfield in nice shape.
Contact:
Gary Edwards
989 Center Rd.
Clinton, OH 44216
Posted: 19 February 2009
1951 United County Fair wooden coin door wanted.
Will pay your price if you got an original one. I am also considering other coin doors from same era that would fit this game. External dimensions are approx. 11" 1/4 by 7" 1/4.
Contact:
Rick
Posted: 18 February 2009
1986 Williams Pinbot -- looking for the green rectangular visor target--must be new or like new. Could also use the light blue plastic that covers the ramp hinge and the Plastic that goes near the shooter lane that has the people in it-- nice used O.K.
Contact:
Wes Dolen
voice: 239-643-1100
2066 50th Ter. SW.
Naples, FL. 34116
Posted: 18 February 2009
Looking for a Solar Ride EM playfield for my pinball. I will come in Allentown the 1, 2 and 3 May.
Contact:
Fabrice Mourgues
2 Place Bellon
Chabeuil, France Drome 26120
Posted: 18 February 2009
Looking for a nice black knight 2000 apron, one without small cracks in the paint.
Contact:
D.carr
Milford, MI
Posted: 18 February 2009
1995 Bally Theatre of Magic Translite wanted. Would prefer NOS, but excellent condition used is fine. Please advise cost and location.
Contact:
John Hoge
2051 Sawyer CT.
Holland, OH 43528
Posted: 17 February 2009
Jurassic Park Plastic
Plastic behind 'control room' scoop
Condition can vary, needs to be intact.
Contact:
Brian
Chantilly, VA 20152
Posted: 17 February 2009
1991 Data East Star Trek I am looking for the Under the playfield ramp called "Under Chute Assy." part # 500-5400-00
Contact:
Mark Willobee
voice: 248-505-1123
Rochester Hills, MI 48309
Posted: 16 February 2009
WTB: Theatre of Magic Translight
Contact:
John Hoge
2051 Sawyer CT.
Holland, OH 43528
Posted: 16 February 2009
1977 Williams Big Deal plastics. Good repo OK. Also interested in scanned file of the plastics.
Contact:
Jay Nogle
Posted: 15 February 2009
'54 Williams Colors 100 Step Unit (D-4798)
I need the 100 Step scoring unit for this game. Any Williams woodrail with lightbox scoring would have used the same unit.
My Lock Arm Assembly (A-5524) is missing the tab that keeps the unit from restting while advancing. A close-up picture of this piece might allow me to repair what I have but it would be simpler if I can find a complete unit.
Contact:
Steve Yates
voice: 216-554-1175
Middleburg Hts., Ohio 44130
Posted: 14 February 2009
I am looking for the backglass in normal (good shape)for Pinball Machine 'SUNSET' produced by Gottlieb in 1962.
Contact:
Uwe Kröger
Stieglitzweg 2b
27607 Langen, Germany
Posted: 14 February 2009
Looking for a 5 cent coin acceptor/rejector that will fit a 1959 Gottliebs Queen of Diamonds. It is a little shorter than the standard 5 cent coin accepter/Rejector.
Contact:
Bill
voice: 203-734-1076
Connecticut
Posted: 14 February 2009
Looking for a nice set of King Kool/Rock plastics.
Contact:
Joe
voice: 610-585-4168
Palmerton, PA
Posted: 13 February 2009
Looking for rolling stones, playboy, and kiss backglasses or playfields. Any shape.
Contact:
Chris Keene
Chattanooga, TN
Posted: 13 February 2009
Still looking for a Gottlieb Spirit of 76 backglass and a Williams Triple Strike backlgass. Some fading is okay, but I prefer there to be little to no flaking. Please let me know what you have so I can restore these machines as they both are missing the glasses completely.
Contact:
Darryl Anderosn
Brooklyn Park, Minnesota
Posted: 13 February 2009
I am looking for Space Odyssey or Space Mission pop bumper caps. Blue or yellow. Looking for one or two caps.
Contact:
Nick
Clarkston, MI
Posted: 12 February 2009
1979 Bally Mystic Backglass Wanted.
Contact:
Charles
voice: -, fax: -
-
-, MI -
Posted: 10 February 2009
I'm looking for a Earth Shaker Back Glass. I'll buy or trade. I've got lots of old pin parts.
Contact:
Steve M
voice: 360.701.7881
Olympia, WA
Posted: 8 February 2009
1971 Gottlieb Pop-A-Card playfield. Will consider any condition.
Contact:
Rick Swanson
Morristown, Tennessee
Posted: 7 February 2009
1972 Williams Winner Backglass -- good to mint.
Contact:
Fred Bobrow
412 Main Street
Beacon, NY 12508
Posted: 7 February 2009
Looking for Gottlieb 'Jacks Open' Orignal Score & Insrtuction Cards.
Contact:
Moe Mizrachi
Posted: 7 February 2009
Wanted, original flyers for a Bally KISS and a Gottlieb Panthera. Please let me know condition and price.
Contact:
Ken
voice: 503-788-4213
Portland, Oregon 97266 USA
Posted: 7 February 2009
Looking for a TWEETY ramp from Bugs Bunny Birthday Bash - used is OK. Please send a picture and the price you are asking for this item including shipping by post to Canada. The email IS valid.
Contact:
John Robertson
voice: 604-872-5757
2343 Main St.
Vancouver, Bc V5t 3c9, Canada
Posted: 6 February 2009
Looking for center plastic (card area) for 1966 williams Top Hand or maybe even a scan so I could recreate it.
Contact:
John
Posted: 6 February 2009
Data East Sound Board Wanted
#520-5050-02: used on Star Wars, Rocky & Bullwinkle, and Jurassic Park.
Let me know pricing!
Contact:
Buck Stine
voice: 321-284-6315
Kissimmee, FL 34769
Posted: 4 February 2009
Looking for a Champion Pub backglass. Email with details
Contact:
Steve Hess
Irvington, NY 105533
Posted: 3 February 2009
Bowler backglass wanted for Bally ABC small ball bowler and C Coin STARLITE shuffle bowler upper and C Coin GOLD MEDAL and FLEETWOOD ball bowler belly glass.
Contact:
Steve
voice: 1815-726-6164
821 Kelly Ave
Joliet, IL 60435
Posted: 2 February 2009
1964 Midway Space Gun - need complete target assembly unit or complete game.
Contact:
Moe Mizrachi
Posted: 1 February 2009
1992 The Addams Family (TAF) arch wanted. Any condition. Cheaper the better.
Contact:
Martin
Berlin, Germany
Posted: 1 February 2009
Early 60s era Williams Lockbar Wanted. I'm after an early 60s Williams lockbar, in particular, a lockbar for a 1961 Williams Reserve. I believe that a Kismet lockbar is the same as well.
Contact:
Steve Corley
Colorado 80111 United States
Posted: 1 February 2009
Looking for pinball kicker coil #A61400047 from an evel knievel home model pinball machine.
Contact:
Mike D
229 Willis Ave.
Hawthorne, NY 10532
Posted: 1 February 2009
1965 Gottlieb Cowpoke - Populated playfield or parts from the playfield.
Contact:
David Hoover
Trivoli, Illinois 61569
Posted: 31 January 2009
1967 Gottlieb Melody backglass. In search of a very nice example.
Contact:
Mike Kapeller
6017 Rainbow Circle
Lincoln, NE USA
Posted: 31 January 2009
Alive Pinball by Brunswick. Need schematics for PC board. Plays for 30-60 minutes and then malfunction, but plays properly after cool down. Or make offer to buy game.
Contact:
Perry
St. Louis, MO 63114
Posted: 31 January 2009
Looking for:
65 Gottlieb Bank a Ball 8 Ball backglass animation ball. Any will do.
Gottlieb Top Card playfield in nice condition.
Gottlieb Quick Draw/Fast Draw playfield in nice condition.
Bally Frontier playfield. NOS or nice condition.
Contact:
John
NJ
Posted: 31 January 2009
1975 Top Score (2 player): I've received this last week and need a lot off spares. PLease let me know what you have and at what price.
I need Top Glass, right rail/glass hold
Rubbers
The playfield is in a very bad state. I'll need another one or a fullsize template
Contact:
Pw
Posted: 30 January 2009
Looking for a Eight Ball Deluxe backbox (with backbox light board) or at least wiring harness for it.
Contact:
Michael Chomiczewski
345 S. Fairfield
Lombard, IL 60148
Posted: 30 January 2009
I have a clean working Gorgar CPU and Driver I would like to trade for a working CPU for a CPU board for a Judge Dredd.
Contact:
Rick
Portage, In.
Posted: 28 January 2009
1947 United Mexico Flipperless Pinball Machine. It was my grand fathers and it needs some serious help to allow his great grandsons to have some fun with it. I found a guy willing to work on it but he's needs a wiring type diagram/manual. Please let me know if you'll sell me one or copy yours for a fee.
Contact:
Don Telaak
voice: 704-907-7817
Posted: 27 January 2009
Wanted for Gottliebs 1959 Queen Of Diamonds. The complete Board containing all the Relays as well as the Score Motor found in the bottom of the Main Cabinet. Must be complete.
Contact:
Bill Harkins
voice: 203-734-1076
Ansonia, CT
Posted: 27 January 2009
I am looking for a set of 82 Gottlieb Rocky plastics.
Contact:
Steve
Posted: 26 January 2009
1958 Williams Gusher backglass wanted - any condition considered - email photos and price.
Contact:
Barry
Posted: 25 January 2009
Looking for Gottlieb 'North Star' Cabinet/playfield/backglass can be in any condition but game must be electromechanically complete (or very close).
Contact:
The Pinball Revival Company
voice: 415 883 4180
372 Bel Marin Keys Blvd Ste D2
Novato, CA 94949
Posted: 25 January 2009
Looking for parts for the following:
Gottlieb:
Raven Translite
Williams:
Firepower II Speaker Panel
Firepower II Playfield overlay or NOS Playfield
Data East:
Left side plastics for Lethal Weapon 3
Speaker Panel for Lethal Weapon 3
Contact:
Shawn Stevens
PA
Posted: 25 January 2009
Parts wanted:
Back doors for Williams 1974 Super Flite, Bally 1973 Odds & Evens, and Gottlieb 1973 Duotron
Gottlieb 1969 Aquarius EM coin door
Gottlieb 1957 Ace High coin door hardware
Gottlieb 1975 Spirit of '76 plastics: A-15870 and A-15869-L only
Can pickup back doors or coin door if located in southern New England.
Contact:
Paul Patti
8 Valiant Ln.
Nashua, NH 03064
Posted: 24 January 2009
Looking for several parts (backglass, plastics, etc.) for a 1971 Gottlieb Play Ball
Contact:
Darren Berg
Posted: 24 January 2009
1940 Exhibit Supply Company Flagship ball lifter knob or from other machine made from that company during that time. Also looking for manuals, schematics, & pics of playfield. I have a 90% complete machine I want to restore it. Any info would be greatly appreciated.
Contact:
Paul Wheeler
voice: 928-925-0740
Po Box 12704
Prescott, AZ 86304-2704
Posted: 23 January 2009
1961 Midway Deluxe Shooting Gallery legs and coin door needed. Pats from similar gun games like Midway Shooting Gallery, Bally Sharpshooter, Bally Marksman should also work.
Contact:
Ron Ohlman
Posted: 23 January 2009
Sega Motochamp Parts
Searching for the following parts for a 1973 Sega Motochamp EM arcade game.
Small amplifier board on the original 8 track player.
Part Number (GN-4604) Also fits Sega Grand National.
Complete Drum/Projector unit which projects road lines onto the playfield. Part Number(MT-1100)
Also interested in any sound/amplifer cards from other Sega EM games.
Contact:
Derek
Posted: 23 January 2009
Looking for standup targets (square not round) and any switchs for Gottlieb's Street Fighter 2
Contact:
Rob
4124-135 Ave.
Edmonton, Ab Canada
Posted: 22 January 2009
Wanted Gottlieb MA-1722 Aux. Driver Board. This is the very small (approx. 2 1/2" x 3 1/2") in size. Usually located on the back of the lamp board in the head of the machine.
Contact:
Rick Pittman
Willow Hill, PA 17271
Posted: 22 January 2009
Bally Silverball Mania playfield or a overlay.
Contact:
Frank
Burlington, NC 27217
Posted: 21 January 2009
I need a gun sight with or without the allen screw for a Chicago Coin Big Top Twin rifle game from 1972.
Contact:
Scott
Rochester Hills, MI
Posted: 21 January 2009
1961 Williams Highways machine legs - the tapered sort. Please contact with price etc.
Contact:
John Baylis
UK
Posted: 20 January 2009
I am looking for 1994 Data East orginal pistol shooter (ball shooter) in new to excellant condition. I am also looking for the original cabinet topper for the game. If you have one or both items avalible for sale please email pictures along with prices.
Regarding payment: I can only consider seller that I can pay using a paypal account. They provide buyer protection and seller receives his money immediatly.
Contact:
Beth Ann Otoole
Warrington, PA 18976
Posted: 19 January 2009
1970 Gottlieb Scuba plastics or just the upper right one. I'm looking to restore this game I bought from Tom Taylor about 15 years ago. Any leads would help.
Contact:
Pete Cooley
fax: (714) 326-8405
Orange County, CA.
Posted: 18 January 2009
1975 Playmatic Speakeasy, Need the 2 flat plastic pieces at the top of the machine (one on the left and one on the right, they meet in the middle) that include holes for the mounting screws for the ball channel flapper that stops the ball from rolling back down the delivery shute and on the left side includes the screw holes for the round rubber cushion that absorbs the initial force of the ball when it first comes out of the shute. The existing plastics deformed from the lamp bulb heat. If you have any sugestions for what material I can use if I make my own, I would appreciate the help. I am afraid regular plastic may melt.
Contact:
Jack
voice: 440-328-6971
Parma, Ohio
Posted: 18 January 2009
Demolition Man Right Ramp
Demolition Man Translite
Contact:
Patrick
Mckinney, TX 75071
Posted: 18 January 2009
Looking for a Gorgar backglass I live in New Jersey would prefer to pick up.
Contact:
James Crawford
voice: 856 4640040, fax: 856 4640040
1 Lavenham CT.
Mantua, NJ United States
Posted: 18 January 2009
WTB: Funhouse Diamond Plate playfield
(FH DP PF)
Must be excellent condition used or NOS. At this point I'm not looking for clearcoated or IPBs. If you can box it, I can have it picked up by FedEx. Please email me with details.
Contact:
Luther
Chicago, IL
Posted: 17 January 2009
1970 Bally Bowl-O backglass, new or excellent condition wanted. I have a backglass if you are a restoration service. Please email with what you have and a price.
Contact:
John Zynda
5906 Channel CT
Greensboro, NC 27410
Posted: 16 January 2009
1940's-1950's Scientific Baseball Game Player Figurines. I remember getting an email about 5 years ago of someone who finally molded replacement/reproduction 3-D baseball players for these classic Pitch-N-Bat games.
Contact:
"Dr. Scott" Sheridan
voice: 419-897-4263
1374 Conant St.
Maumee, OH 43537
Posted: 15 January 2009
1992 Gottlieb Cue Ball Wizard - Looking for a light dome cover for the left side of the upper playfield (mounts on ramp). These are the small pool balls labeled 1-7. Must be in good condition with no damage to the balls. Please let me know if you might be able to help complete my game.
Contact:
Gregg Bizier
Posted: 15 January 2009
Champion Pub NOS backglass. $200.
Contact:
B Mccullough
Cincinnati, OH
Posted: 15 January 2009
Looking for a 1975 Williams Toledo Bonus Unit Mechanism as well as a backglass for reasonable. Please email a pic.
Contact:
Gary Bokamp
Posted: 15 January 2009
Wanted: Good to mint backglass for 1976 Gotllieb Surfer, the 2 player not Surf Champ.
Contact:
Corey
Picayune, MS 39466
Posted: 15 January 2009
Looking for a 1975 Williams Toledo Bonus Unit Mechanism. Please email a pic.
Contact:
Gary Bokamp
voice: 815-962-0935
4703 Jade Parkway
Rockford, IL 61102
Posted: 15 January 2009
Wanted - 1960 Gottlieb "Light a Card" 2 player backglass-very good condition.
Contact:
Jim Oswald
voice: 801 556-8197
252 N 400 E
Centerville, Utah 84014
Posted: 14 January 2009
I am after a Bally Rolling Stone playfield, it could be bare or fully populated, I am after a replacement for the worn one I allready have, I am after a playfield with minimal or no ware at all, willing to pay well.
Contact:
Tony Tanti
High Street
Melbourne, Victoria 3076
Posted: 13 January 2009
I am looking for partial or full plastic sets for a Data East Jurassic Park. Also looking for other various parts if you are parting one out. Please let me know what you have.
Contact:
Bryan
Posted: 13 January 2009
Need schematic for Bally Eight Ball machine.
Contact:
James Smith
voice: 928 376 0969
1228 S. 40th Dr.
Yuma, AZ 85364
Posted: 13 January 2009
1950 United Skee Alley Backglass.
Contact:
Alex Fuchs
Edgerton, WI 53534
Posted: 12 January 2009
Have the following machines im parting out. Space Invaders, Sharpshooter, Solids N Stripes, Gulfstream, Freedom (EM), Supersonic, Vector, Lazerball, Hot Doggin, and Bow n Arrow. Just ask for what ever parts you need and we can deal on price.
Contact:
Joe
voice: 940-867-0875
TX
Posted: 11 January 2009
1960 Bally Space Flight EM arcade - looking for a new motor, part number is E-119-398B, my motor is toast and blows the fuse. Will pay your price for the original part in working condition. This motor is the one used to move the module left and right.
Contact:
Rick
Posted: 10 January 2009
I am in need of some parts for a 1990 Williams Diner, as follows:
1) Cash register assy
2) Left clear ramp (long one that dumps ball back into left inlane)
3) Wireform right ramp (one that dumps ball back into right inlane)
I have a decent, restorable game that is missing these parts, used or NOS acceptable. Please let me know what you have.
Contact:
Chris Munson
Richardson, TX
Posted: 10 January 2009
Wanted Backglasses: 1967 Bally Surfer's, 1969 Williams Paddock, 1972 Williams Honey, 1970 Bally 4 Queens, and 1973 Bally Rogo, I'am looking for nice backglasses, near mint, but will consider nice, with a little flaking, plz email me with good pictures. Will not buy backglasses from overseas, just America.
Contact:
Eric Spangler
1004 Royer Road
New Bloomfield, PA 17068-usa
Posted: 10 January 2009
Looking for a Williams Blackout Backglass in decent shape.
Contact:
Gary
voice: 865-856-5066
Knoxville, TN
Posted: 9 January 2009
williams jokerz upper playfield mine has cracked and yellowed looking for clear one to match ramps.
Contact:
David Wolper
voice: 631 223 6325
2 Kara Court
Centereach, New York 11720
Posted: 9 January 2009
1973 Gottlieb Pro Pool Backglass wanted, excellent to mint.
Contact:
Mike Boerschinger
Waukesha,, WI
Posted: 8 January 2009
Backglass wanted for 1964 Williams Soccer. Mine is OK but would like one better. Also, need some playfield plastics for same game. I'm an old time pin collector and am not getting any younger.
Contact:
David Metsch
voice: 303 660 1981, fax: 720 733 2084
387 Suffolk Ln.
Castle Rock, CO 80108
Posted: 8 January 2009
I am looking for a good looking backglass for a 1977 Stern Pinball.
Contact:
Joseph
Marietta, GA 30062
Posted: 8 January 2009
Wanted all years. Empty cabinets and back boxes Trashed or Thrashed any condition. If you are going to throw it out let me know. I need it! I will be making reproduction Cabinets Under license from Gottlieb (Still working on license agreement) I need old beatup trashed cabinets for dimentional reasons and research and development. Please let me know if you have a system that is hard to find or you are willing to allow me to take some pictures/scans of to start building our graphic stencil inventory.
Contact:
Keith Jenkins
Boca Raton, Florida 33428
Posted: 7 January 2009
1957 Genco Showboat Schematics wanted
Contact:
Adam Smereczniak
Posted: 6 January 2009
I'm looking for parts for a 1979 Williams GORGAR pinball machine.
The Backglass and playfield specificly but if you have other parts I'd definately like to hear what you have.
Contact:
Eric Bousquet
388 Elm St.
East Longmeadow, MA 01028
Posted: 6 January 2009
Wanted: Miss world backglass any condition considered. Will pay $50-$350 depending on condition.
Contact:
Neo
voice: 414-303-4704
Burlington, WI
Posted: 6 January 2009
Looking for a Centaur II Backglass.
Contact:
Doug Tipple
voice: 480-226-6497
11221 South 51st Street # 3026
Phoenix, AZ 85044
Posted: 5 January 2009
Searching for Mary Shelley's Frankenstein full playfield plastics set.
Contact:
Craig
Posted: 5 January 2009
WTB: 1980 Stern ALI backglass. >Need a really nice one.
Contact:
Dan
NC
Posted: 4 January 2009
I'm searching for a System 11c CPU board for my Dr. Dude.
Contact:
Enzo Pasciuti
Posted: 3 January 2009
Wanted: Strikes and Spares Playfield, preferrably NOS.
Contact:
Michael Thomas
voice: 2703002394
Vine Grove, KY 40175
Posted: 2 January 2009
1980 Williams Scorpion backglass.
Contact:
Joel Faermark
voice: 847-401-1381
454 W Touhy Ave #499
Des Plaines, IL 60018
Posted: 1 January 2009
Looking for a Williams Toledo back glass in decent shape.
Contact:
Gary Bokamp
4703 Jade Parkway
Rockford, Ilinois 61102
Posted: 31 December 2008
I need 2 Gottlieb System 3 driver boards MA-1358 & a Gottlieb System 3 CPU board MA-1934. Boards can be in any condition, so non-working or unknown condition ok.
Contact:
Rick Pittman
Posted: 30 December 2008
Looking for a 1969 Gottlieb Target Pool backglass. Prefer a Ron & Nancy Webb repro glass. If you have a used glass available or know of someone who may have one available, please let me know. I have several friends in the USA, whom you could ship to if you don't want to deal with international shipping.
Contact:
Stuart Caines
Australia
Posted: 30 December 2008
Looking for a NOS or real nice 1969 Gottlieb Target Pool playfield. If you have a playfield available or know of someone who may have one available, please let me know. I have several friends in the USA, whom you could ship to if you don't want to deal with international shipping.
Contact:
Stuart Caines
Australia
Posted: 30 December 2008
I need the animation unit plastic on a Gottlieb Miss Annabelle. Mine is there but it is pretty faded and warped. Could also use a better animation fan disc for the same game if the price is right.
Does anybody know if these parts were reproduced?
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 29 December 2008
Gottlieb multi player woodrail - just need one timber rail. Has to be a multi player rail as they are wider than the single player.
Contact:
Tony Mather
Posted: 28 December 2008
Parts for 1978 Williams Pompeii Shuffle Bolwing game. All boards/parts.
The games starts up but shows both LEDs, so there is some problem with the CPU and Driver Boards.
Contact:
Scott Hotham
Doylestown, PA 18901
Posted: 26 December 2008
1990 Bally The Game Show. Need a populated playfield, no ramps or plastics needed. 7+ or better.
Contact:
J.mason
Ohio
Posted: 25 December 2008
I am looking for a backglass or scan of the backglass for a Phantom Of the Opera. If you have one for sale please contact me with condition and price.
Contact:
Brian
VA
Posted: 25 December 2008
I'm looking for the plastic cover for the score and credit displays on a Gottlieb Monte Carlos. I could also use a new ternslight as mine is sun faded.
Contact:
Mark Hooks
voice: 850-894-8103
2357 Hampshire Way
Tallahassee, FL 32309
Posted: 25 December 2008
Wanted topper for Whitewater, not worried about the dome but all other parts
Contact:
Benny Benstead
Posted: 25 December 2008
1959 D. Gottlieb & Co. Head of the game or just the plastic spinning disk that says lightning ball with the toy solders on it. I will buy the entire head if necessary just to get the plastic disk. Trying to complete a restoration project.
Contact:
David F. Silverman
voice: (240) 372-3333, fax: (301) 384-2779
614 Cannon Road
Silver Spring, Maryland 20904
Posted: 24 December 2008
Ultrapin: Preferably with the most recent updates from Global VR.
Contact:
Joe
Royal Oak, Michigan
Posted: 24 December 2008
1957 Williams Star Colors Schematic, Backglass Photos
I have a Colors schematic, but it does not show the match numbers or star lights and I am wondering if there may have been 2 different versions of this game with different schematics. I noticed that the 1960 Parts Catalog referred to the game as Star Colors rather than Colors, though my backglass just says Colors, unlike the other Star games.
I could also use some photos of the backglass, especially the back of the glass. The section with the stars is completely flaked off on mine and I would like to know what they look like so I can recreate them.
Contact:
Steve Yates
voice: 216-554-1175
Cleveland, OH 44130
Posted: 22 December 2008
Medieval Madness speaker panel wanted, must be in mint condition.
Contact:
Tony Stark
voice: 61 403 26 33 06, fax: 617 3219 9965
Brisbane, Qld Australia
Posted: 22 December 2008
United Handicap shuffle alley backglass wanted. Believe it is a 1956.
Contact:
Mike Cwalina
voice: 724-942-1492
405 Timberlake Dr
Venetia, PA 15367
Posted: 22 December 2008
Looking for a nice backglass for a 1975 Williams triple Strike.
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 21 December 2008
Looking for Rockola Pinball Legs for Jigsaw and I need a sound stage score reel (complete assembly).
Contact:
Alex
New York
Posted: 21 December 2008
Wanted: Working SB-100 Stern sound board.
Contact:
Ken
voice: 260-490-7673
Fort Wayne, In
Posted: 21 December 2008
Looking for old backglasses. Doesn't need to be in perfect shape.
Contact:
Chris Keene
Chattanooga, TN
Posted: 20 December 2008
Wanted: 1992 Getaway High Speed 2, Complete Supercharger Entry Ramp Sign, bracket, lights, wiring, etc. I will ONLY buy from UNITED STATES sellers. If out of COUNTRY, DO NOT BOTHER ME.
Contact:
Kirk Drotar
P.O. Box 2002
Arvada, CO 80001
Posted: 20 December 2008
We need the bell that sits on top of the 1987 Williams Fire pinball machine.
Contact:
Kathy
Posted: 20 December 2008
In need of flipper solenoids for a Williams 1980 Firepower. Primarily in search of new or used if need be. Please email if you have a lead, will only give out address in case of shipping arrangements.
Contact:
Brian Thomas
Vancouver WA
Posted: 20 December 2008
Need a Tweety's Slide Ramp from Bugs Bunny Birthday Bash. Used and imperfect condition is OK (within reason). Picture appreciated - trying to restore my ramp or make a replacement as no new ones available at this time.
I have lots of NOS or used parts - perhaps a trade?
John :-#)#
John's Jukes Ltd.
Contact:
John Robertson
voice: 604-872-5757
2343 Main St.
Vancouver, Bc V5t 3c9, Canada
Posted: 19 December 2008
Wanted:
Seawitch Apron
I cleaned mine so well that I took the graphics and text right off. I could really use a new one. Please e-mail me if you have one!
Contact:
Bryon Triplett
Posted: 19 December 2008
Looking for parts for a 1954 Gottlieb Jockey Club Machine
Mine partially works but not properly.
Contact:
Mark Ireland
Rr 1
Wilsonville, Ontario N0e 1z0
Posted: 18 December 2008
Looking for the following parts:
Any Flight 2000 playfield plastics
Gottlieb Sunshine backglass and parts.
Contact:
Stewart Virgona
Sydney, NSW Australia
Posted: 18 December 2008
I'm looking for a Gottlieb motor board transformer for a 1969 Spin A Card
Contact:
Mike
Posted: 17 December 2008
Looking for any Stern Flight 2000 playfield plastics. Any help appreciated.
Contact:
Stewart Virgona
Posted: 17 December 2008
Looking for any and all parts for Joust cocktail pinball by Williams (1983, but specifically PF plastics and aprons.)
Looking for any and all parts for Defender pinball by Williams (1982, but specifically the PF, PF plastics, single drop targets and 2 metal PF support hoops.)
Also looking for a Bad Cats PF, backglass and plastics.
Also looking for the main ramp for Doctor Who.
Contact:
Kris Bliznick
Tucson, Arizona
Posted: 16 December 2008
Looking for Overlays for both Bally Playboy and Silverball Mania would also consider original playfields with minimal wear.
Contact:
Cory
Posted: 16 December 2008
Wanted: Old non working/ working playfields. The cooler the better. Any condition. Elvis, Evel Knievel, band themes, sport themes, superheros, all a plus.
Contact:
Chris Keene
Chattannooga, TN USA
Posted: 16 December 2008
1964 - 1966 Gottlieb upper arch. Also, need apron for 1965 Gottlieb Cowpoke. 1964 Gottlieb Majorettes apron would work also.
Contact:
David Hoover
Trivoli, Illinois
Posted: 13 December 2008
High Speed. I'm looking for a new or nice used ramp ans jet bumper caps. If you have any other High Speed parts, I may be interested in those as well.
Contact:
Paul Olson
Reno, NV 89506
Posted: 13 December 2008
Want Odd Ball plastic bumper caps for woodrail pinballs.
Contact:
Jack
Loveland, Ohio 45140
Posted: 13 December 2008
1984 Bally Spy Hunter playfield plastics - must be in good condition. Specifically want the left top corner piece.
Contact:
Jeff Winters
voice: 507-536-0241
1330 19th Ave SW
Rochester, MN 55905
Posted: 12 December 2008
Universe by Zaccaria - 'Coin Unit' stepper.
I recently acquired this pin and am in the process of restoring it. I noticed the wiper fingers are missing from the 'Coin Unit' stepper. I am hoping to replace the whole unit, or just the fingers, or even a photo of the unit in the rest position so I can make my own wiper fingers. If anyone is parting this machine out, please contact me.
Contact:
Aaron McCall
voice: 519-808-6815
134 Queen Street
Komoka, Ontario N0L 1R0 Canada
Posted: 12 December 2008
Parts for Bally Galaxy Ranger 1978 ( Boards )
Contact:
Robert
Posted: 11 December 2008
Williams playfield score reels or reel decals (Wagons, Lanterns, Pans etc.) NOS or used if good quality.
Contact:
Mitch Paulsen
voice: (516) 270-2867
Posted: 11 December 2008
Looking for decent but inexpensive Gottlieb Joker Poker backglass as well as drop targets for the machine.
Contact:
Kerry Hudson
Posted: 10 December 2008
Looking for the flipper cover for a Williams EM Little Chief.
Contact:
Jim Kruger
Sleepy Hollow, IL USA
Posted: 10 December 2008
Wanted: 5 stack switch for anti cheat for a 6 Card Bally Bingo.
Contact:
Robert Honchark
voice: 860-2256537
Hartford Conn.
Posted: 10 December 2008
All parts for a Williams Joust pinball.
Contact:
Paul Brown
voice: 314-406-2000
17608 Gardenview Manor Circle
Glencoe, M0 63038
Posted: 9 December 2008
Looking for an apron for Strange Science Pin. In good condition
Contact:
Joe Hankins
Posted: 9 December 2008
1981 Bally Embryon: Looking for a playfield in nice shape.
Contact:
Pinballfan81
Posted: 8 December 2008
Wanted:1969 Bally: COSMOS, Backglass in nice condition, if any exist.
I will ONLY buy from UNITED STATES sellers!!, Out of Country, DO NOT BOTHER ME.
Contact:
Kirk Drotar
P.o. Box 2002
Arvada, CO. 80001
Posted: 7 December 2008
I am looking for a backglass for a Nugent pinball or an old Nugent machine that can be parted out.
Contact:
Jerry
Asheville, NC 28806
Posted: 6 December 2008
1958 Bally All Star Deluxe Bowler cycle motor assembly wanted!!
This is part E-119-142, the unit that moves the ball shooter back and forth. Mine burned out badly due to a stuck mechanism and is unusable.
Will pay good money for a working one. Please email me if you have it.
Contact:
Rick
Posted: 5 December 2008
Gottlieb, Cleopatra
Need SS backglass for machine.
Looking for a nice one.
Contact:
Scott Pullen
fax: 207 283-0224
Saco, Me United States
Posted: 5 December 2008
KISS plastics wanted, also, coin box for same machine
Contact:
Kerry Hudson
Posted: 5 December 2008
Looking for a Data East Star Trek playfield in good condition. No parts needed but won't mind if has.
Need to send to Spain.
Contact:
Angel
Spain
Posted: 5 December 2008
Wanted: Big Indian / Big Brave Playfield, very good condition
Contact:
Scott
Las Vegas, NV
Posted: 5 December 2008
Looking for a 1967 Gottlieb Hi Score Backglass. I am also looking for a 1977 Gottlieb Bronco Head with out Backglass.
I also have backglass for sale or trade for other backglass.
Contact:
Rick
voice: 951-203-7307
2679 Quail Knoll
Lake Elsinore, CA 92530
Posted: 4 December 2008
Wanted: 1948 Gottlieb Buccaneer Backglass in decent shape, can be repro.
Contact:
Andrew Sneed
Posted: 4 December 2008
1964 Texas Ranger Gatling Gun: 2 plastics that are inside showing targets. Mine have deteriorated. Also need any Mutoscope (American) Parts Including Case, Doors, Stands Etc. I left 3 of them at the powdercoaters 10 yrs ago and never reclaimed them.( Pretty stupid Huh? I have all the insides and Trim.
Contact:
Jim Marin C/o Viva Hollywood
voice: 702-383-8482, fax: 702-383=0627
1126 S Main Street
Las Vegas, NV 89104
Posted: 2 December 2008
1979-1980 Bally Rolling Stones playfield
VG to NOS, reasonable price please
I am restoring a game in my spare time
Contact:
Steve
Morton Grove, IL 60053
Posted: 2 December 2008
I am looking for the inner backglass for a Gottlieb Mars God Of war.
Contact:
Dan Cavalieri
voice: 402-706-1164
2201 South 57th Street
Omaha, NE 68106 USA
Posted: 1 December 2008
1968 Williams Ballpark Looking for backglass and upper playfield homerun box.
1969 Williams Paddock Looking for backglass
1970 Williams Hit and Run Looking for backglass
1947 Exhibit Crossfire Looking for backglass
1937 Stoner Richocet Looking for playfield
1949 United Shuffle Alley Set of light-up pins and metal bar with ends that sits 1/2 way down the alley.
1954 Bally Jett Bowler Backglass and metal bar with ends that sits
1/2 way down the alley
Contact:
David Baldwin
Po Box 36
Newbury, Ohio 44065
Posted: 30 November 2008
1982 Bally Centaur II backglass needed. Does not need to be perfect.
Contact:
Basil
Colorado 80537
Posted: 27 November 2008
I am looking to buy the following backglass for these machines.....1969 Williams Paddock, 1972 Williams Honey, 1980 Williams Black Knight Limited Edition, 1972 Bally Bon Voyage, 1974 Bally Sky Kings. 1953 Bally Beach Club (Bingo) Prefered in Presentable Condition Minor Flaking Expected
Contact:
Richard Davis
voice: 209 392 8720
1042 Dos Palos Avenue
Dos Palos, California 93620
Posted: 27 November 2008
Whitewater boulder that goes under the shooter ramp. Repro or original ok. Send picture of what you have.
Contact:
Robert
Posted: 24 November 2008
Gottlieb Flying Circus score and instruction cards. Originals, scans, whatever you have is appreciated.
Contact:
Joe
Posted: 23 November 2008
Looking for parts for these machines.
Captain Fantastic-Bally
The Six Million Dollar Man-Bally
Blackout-Williams
Please let me know what you have with a price included.
Contact:
Justice Colwell
139 Fralicks Beach Road
Port Perry, Ontario Canada
Posted: 23 November 2008
This information is current as of November 22, 2009 2:52:04 MST
© Copyright Mr. Pinball 2009. All Rights Reserved.