Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Brought to you by
Mr. Pinball Classified: Pinball Parts Wanted: All Entries
Welcome to the largest and oldest Pinball Parts Wanted page on the
Internet. All entries are sorted in order by date of post, with most recent
listed first.
If you need hard-to-find parts fill out
this form and your entry will be added to this page. This is completely FREE!
1981 Bally Embryon
Looking for IC Chips for the MPU Board. Specically U10 and Ull
Bally Part # 00620-0029
F6820P 7922 Singapore
Contact:
Jeffrey Dumont
Posted: 21 November 2009
Ball lift guide for a 1959 Williams Spot Pool wanted. This is the metal part that is nailed into the side of the cabinet to guide the ball into the shooter lane when lifted.
Contact:
Mike Rasmussen
voice: 402 4893487
9230 Foxen Circle
Lincoln, NE United States
Posted: 21 November 2009
Looking for new or used pair of ruins for Williams Indana Jones. Looking for plastic ramp for Gottlieb Monte Carlo and center drop target plastic.
Contact:
Rick
3013 Lyme St
St.charles, MO 63301
Posted: 21 November 2009
WANTED: Center plastic for Williams Suspense and plastic set for Williams Full House.
Contact:
Paul
voice: 408-621-6056
Morgan Hill, CA 95037
Posted: 21 November 2009
I need a BS dracula pinball lamp board A-16110-1. It is the seven lamp board that is under the playfield and lights the D_R_A_C_U_L_A letters. Please let me know if you have one for sale and if so how much.
Contact:
Michael
Mansfield, MA 02048
Posted: 20 November 2009
Looking for a Medieval Madness semi populated or fully populated playfield. Not looking for just a blank playfield. Name your price.
Contact:
John P. Dayhuff
voice: 269-979-3836
Battle Creek, MI
Posted: 20 November 2009
1979 Gottlieb Genie Backglass - No/Minimal Flake
1980 Bally Silverball Mania Backglass - No/Minimal Flake
1980 Bally EMBRYON Playfield - Any condition.
1980 Stern QUICKSILVER Playfield - Any Condition
1980 Stern QUICKSILVER Plastic - Upper Left - right of spinner on left side.
Contact:
Steve
voice: 248-760-7381
West Bloomfield, MI 48323
Posted: 19 November 2009
1982 Gottlieb Devil's Dare:
Looking for an excellent plastic set or only the centre one.
Contact:
Pascal
Quebec Canada
Posted: 19 November 2009
Looking for a 1964 Williams Soccer backglass in good shape, the one I have now is about a 6 out of ten.
Contact:
Paul Matheson
Barrie, Ontario
Posted: 19 November 2009
Looking for a Balls a Poppin Bally backglass. If you have one for sale, let me know.
Contact:
Steve
Englewood, CO
Posted: 19 November 2009
Looking for a metal back door and the u metal guide for a Gottlieb 1976 Surf Champ.
Contact:
David
10456 Ave Du Parc-georges
Montreal, Quebec H1h 4y3
Posted: 19 November 2009
Looking for an empty back box (head) for any Bally 2 or 4 player machine from 7/63 Cue Tease to 2/74 Twin Win. Paint condition not important. No water damage, delamination or warping please.
Looking for nice backglass for Bally Star Jet
Can pick up at Pinfest in Allentown on Nov. 20 and 21.
Contact:
Dave Metrando
voice: Cell: 845-464-3405
Highland, New York
Posted: 19 November 2009
Looking for a Seven Seas Gottlieb backglass. Let me know if you have one for sale.
Contact:
Steve
Englewood, CO
Posted: 19 November 2009
Looking for a WMS 10 switch opto board, part number A-18159. email or call if you have a tested and working one.
Contact:
John W Powell
voice: 5708788896
Posted: 19 November 2009
Looking for Mattel Las Vegas circuit board.
Contact:
Lance Foster
Bridgewater, VA
Posted: 19 November 2009
Pinbot Red Topper Lens - must be in good condition.
Contact:
Rick
Chattanooga, TN
Posted: 19 November 2009
Backglass for 1953 Bally Ice Frolics
Schematics/manuals for the above & 1957 Miss America
Contact:
Rvpruitt
3806 Rozzelles Ferry Rd
Char, NC 28216
Posted: 18 November 2009
I am looking for a mint playfield for Gottlieb's Countdown.
Contact:
Jean
Posted: 18 November 2009
I'm Looking for the spinner targets from Stern Star Gazer the yellow with blue "S" style. Also looking for plastic posts 'blue' and playfield plastics.
Contact:
John Fulton
voice: 250-860-1075
901 Purcell Drive
Kelowna, BC V1V 1N6 Canada
Posted: 18 November 2009
1985 Bally Escape From The Lost World (plastic mountain cover)
Playfield Item #15 Arch Assy AH05-00058-0000
or Item #52 Bottom Arch OH05-00923-0000
(Plastic cover [mountains] below play field)
Contact:
Chuck Westek
808 Milan Ave
So Pas, CA 91030
Posted: 17 November 2009
I am looking for Williams Joust Pinball parts (I know, I know)
Plastics, a Marquee, and an apron
Any, all, some, point me towards someone you know who has them... any help would be appreciated. Will do cash or trade, just mail me with what you have and a price you want.
Contact:
Andy
NH 03830
Posted: 17 November 2009
Looking for replacement backglass for 1949 Williams TUCSON and DALLAS.
Frank
Contact:
Frank
Posted: 17 November 2009
Need original scorecards for Gottlieb Dragon SS.
Contact:
Ben Artherholt
Posted: 17 November 2009
1987 Data East Laser War. Bought this machine not knowing that one of the playfield plastics was missing. Looking for the second tier on the right side (Guy in blue overalls with machine gun and helmet on). If anyone is parting out their Laser War machine I would be interested in a few parts, most importantly the ramp!
Contact:
Jason Wright
14634 S Kaw Dr.
Olathe, KS 66062
Posted: 16 November 2009
1993 Judge Dredd planet gearbox with or without motor. Missing one of the gears when I got it. Take the whole unit if you don't want to split it up. Let me know $.
Contact:
Steve
Lothian, MD 20711
Posted: 16 November 2009
I need stencil for body of Gottlieb DROP A CARD. Should be triangular shapes, for red and blue.
Contact:
Larry
voice: 732 881 3444
Posted: 16 November 2009
Looking for a plastic backbox aprox. 4"x22". This piece has the hole a bit larger than the steel ball for a Super Home Run. This is for a Williams 1962 World Series (pitch & bat). I would consider a reproduction if I can't find a original.
Contact:
Fred Dixon
voice: 336 889-2064
802 Fairidge Dr
Jamestown, NC
Posted: 16 November 2009
Looking to buy decent backglass for Gottlieb Jumping Jack and Williams Solids and Stripes
Contact:
Mark Banning
Posted: 16 November 2009
Bally Skateball
Looking for the playfield plastic that goes over the center bank of three drop targets.
Contact:
John
WI
Posted: 16 November 2009
1950-54 Gottlieb Woodrail parts including cabinet to restore a fire damaged game.
1959 Bally De Luxe Club Bowler Backglass
Club Bowler backglass will also work.
Contact:
Jim Divoky
Dandridge, TN
Posted: 15 November 2009
1964 Williams Wing Ding or Zig Zag playfield plastics. Any condition but prefer a nice set. I specifically need the two center plastics by the kickout hole.
1964 Williams Wing Ding backglass - Must be real nice.
Contact:
Randy Kluber
9126 Raodrunner St.
Highlands Ranch, CO 80129
Posted: 15 November 2009
1994 Williams/Bally WPC Audio/Sound Board (A-12738)
Looking for a sound board for WPC games - specifically, Twilight Zone.
Important lesson for anyone interested - do NOT accidently reverse plug J502 on the audio board (+5VDC) with J901 on the Fliptronic Board (50VAC). (Yes. They are keyed identically.) Very bad things happen.
After a long time I was able to get all my other boards fixed and back in operating condition - except for this one.
Any leads would be appreciated.
Contact:
Mike Morrey
Po Box 129
Boyds, MD 20841
Posted: 15 November 2009
Looking for Cirqus Voltaire slingshot plastics (both of them), must not be cracked or spidered at holes.
Contact:
Keith
Olympia, WA
Posted: 15 November 2009
Looking for the front coin mechanism and cover for an US Marshal 5 cent
Contact:
David
voice: 414-393-0949
Milwaukee, Wisconsin
Posted: 15 November 2009
wanted: Gottlieb red plastic shooter gauge for mid 50's woodrails.
Contact:
Rob
Posted: 15 November 2009
we are looking for a Laser Cue playfield apron.
Contact:
Vinita Mcminn
voice: 316 776 2535
Rose Hill, KS 67133
Posted: 15 November 2009
1969 WMS Gridiron backglass--bat game, near mint please
Also 1968 Bally Safari backglass (tiger in your tank theme) near mint please.
Need two of each if I can find them.
Contact:
Randal Moffitt
voice: 712;584;5408
617 Nth 7th St
Estherville, IA
Posted: 14 November 2009
1982 Bally Mr. and Mrs. Pacman pinball machine lower glass (the one that covers the displays). Must be in very nice shape. Some one I met from this website made me a translite for the backglass of this pin, but I don't remember who. If you see this ad and can make me a repro for the bottom glass, that would be great. If you can help, call me at 717-521-6134.
Contact:
Mike Garcia
voice: 7175216134
7 Pine Way
Fayetteville, PA 17222
Posted: 14 November 2009
1988 Data East Secret Service--looking for the yellow plastic cap from the topper there re 2 but I only own one, the other is missing. If you have that part please contact me.
Contact:
David Collin
Posted: 14 November 2009
1993 Bally Judge Dredd deadworld dome. ie: the black dome that sits in the plastic rings of the deadworld.
Contact:
Jarrod
Caroline Springs Australia
Posted: 14 November 2009
Bally Squawk n Talk sound board. Must be tested and fully working.
Contact:
Casey
Los Angeles, CA
Posted: 14 November 2009
Wanted backglass for
1969 Williams SEVEN UP
1970 Gottlieb BASEBALL
1976 Williams BLUE CHIP
Repro would be okay
Contact:
Greg Sommer
voice: 248-830-4721
8720 Northend
Oak Park, MI 48237
Posted: 14 November 2009
Williams Firepower Playfield - any condition. I mainly need the hardware on the upper playfield, so artwork and plastics can be any condition.
Contact:
Casey
Los Angeles, CA 90065
Posted: 14 November 2009
WTB: Williams Upper Deck (1973) BACKGLASS
Anyone have one for sale?
Contact:
Kev N.
Brampton, Ontario Canada
Posted: 14 November 2009
I'm looking for a Stern Galaxy pinball cabinet. I've recently purchased this game with a nice backglass and playfield, but the cabinet is pretty rough. I'd prefer to switch the cabinet out with one in better shape if someone has parted this title out. Let me know what you have, pictures and details would be greatly appreciated. Scam artists need not apply.
Contact:
Craig Hassell
voice: 214-632-5537
Forney, Texas
Posted: 13 November 2009
Jack*Bot - Looking for NOS mini playfield
Contact:
Doug Huse
voice: 860-488-0169
New Milford, CT 06776
Posted: 13 November 2009
Looking for any parts for Evel knievel and Nitro ground Shaker. Playfields, projects, backglass, etc. Pics will be required.
Contact:
Brian Johnson
voice: 913-406-4211
15676 South Locust St
Olathe, Kansas 66062
Posted: 13 November 2009
Looking for the following back glasses in good condition only with no flaking. Would consider a reproduction if it is in mint condition. Would however like to pick it up so you must be within 300 miles or so of Quincy, IL.
1. 1957 United Team Bowling Alley (I will buy this in any condition)
2. Flipper Parade
3. Flipper Pool
4. Flying Carpet
5. Gigi
6. Silver
7. Majorettes
Looking to buy the following playfields in good original condition.
1. Domino
2. Super Sonic
Looking for the following pinball flyers.
1. Bally Black Jack (EM Version) Not sure if on was ever made for it.
2. Flipper Pool
Contact:
Dennis
Quincy, IL
Posted: 13 November 2009
I need and original E724-25 U2 chip for a Bally Power Play. I can burn a 2716 but I do not know if you can jump a 17 board to handle a 2716. So if you have the chip or know the jumps for a 2716 on 17 board, let me know.
Contact:
Mark
SW PA.
Posted: 12 November 2009
Wanted to buy: Class of 1812 slingshot plastics, repro OK. Let me know the cost and condition.
Contact:
Tony
voice: 262-378-0676
Eagle, WI
Posted: 12 November 2009
Gottlieb Foto Finish playfield wanted NOS or excellent.
Contact:
Tony Mather
Posted: 11 November 2009
Looking for 1969 Gottlieb Spin a Card lockdown bar.
Contact:
Ted
Posted: 11 November 2009
Theatre of Magic right wire ramp part #12-7262.2
Contact:
Steve Slankard
voice: 760-702-7870
CA 92253
Posted: 11 November 2009
1992 Bally Black Rose rectangular Center Fire Button, switch and Lock Down Bar. I need these parts as a past owners has replaced them with a hacked flipper button and switch. Contact - pinball@the-bradley.net
Contact:
Craig Bradley
Sydney, Nsw Australia
Posted: 10 November 2009
1993 Bally Twilight Zone Part # A-16434 Kicker Assembly and or #A-16435 Kicker Bracket, I've exhausted known sources to me, can anyone help?
Contact:
Mike Salomone
voice: 2165335439
16955 S. Boone Rd.
Columbia Station, Ohio 44028
Posted: 10 November 2009
I'm looking for playfield plastics for Lethal Weapon 3 (LW3) and the Blue topper dome. I do not need the slingshots.
Contact:
Gene
Blackstone, VA.
Posted: 9 November 2009
I am looking for a NOS Playfield for a Gottlieb 'Surf Champ' pinball machine.
Contact:
Nick
Posted: 9 November 2009
Looking for a Bally Eight Ball and a Harlem Globetrotters head. Do not need boards or backglass. Looking for something in and around the Cincinnati, Ohio area.
Contact:
Rob
Posted: 9 November 2009
Looking for complete working Gottlieb Black Hole. Machine complete but does not have to be collector quality. Please provide a few pics of the machine. Looking in the Ohio/PA area. Pick up is available or shipping can be an option.
Contact:
Mark
Ohio 44149
Posted: 9 November 2009
Need backglass for Gotlieb Buck Rogers 1979.
Contact:
Larry
voice: 7328813444
21 Wayland Dr
Matawan, NJ
Posted: 9 November 2009
Sega Independence Day items wanted:
Translite / Backglass
Ramp decal set
Alien Head
Right ramp
Metal ramp guide for center ramp (Left One)
Email me at darimont2@aol.com
Contact:
Dan Darimont
Aurora, Illinois
Posted: 9 November 2009
Wanted: GTB Surf Side playfield in NOS or Exec. condition. Also excellent backglass for same. Please mention price in your reply.
Contact:
Bob Andrews
Orland Park, IL 60462
Posted: 9 November 2009
Backglass for JOCKEY CLUB in perfect condition wanted by www.pinball-museum.com paris france
Contact:
Pinball Museum
Paris France
Posted: 8 November 2009
I'm looking for:
1976 Bally Old Chicago Bonus unit.
Contact:
Joris Blonk
Witte Hoeflaan
Oss, Brabant 5343eg
Posted: 8 November 2009
I need a Translite for Doctor Who.
Contact:
Hugh McCreight
23233
Posted: 8 November 2009
Need a metal backbox back door for a mid-1970's 2 or 4 player Bally pinball. Measures approx. 27-3/4 inches by 25-1/2 inches.
Door from any of the following games should work: Space Time, Time Tunnel, Monte Carlo, Nip-It, Time Zone, Circus, Big Show, Champ, Twin Win, Amigo, RoGo, Boomerang, Flicker, Air Aces, Knockout, Wizard, Bow and Arrow, Flip Flop, Hokus Pokus, Old Chicago, Freedom, Aladdin's Castle, Capt. Fantastic, Freedome, Kick Off, Quarterback, Hang Glider
Contact:
Ray
voice: 801-272-0221
Salt Lake City, UT
Posted: 8 November 2009
1977 Gottlieb Jungle Queen left hand side plastics
I believe the part numbers are:
A-16591-L, A-16589-L, A-16588, and A-16592-L?
If you have the actual part numbers on your machine, I would appreciate that information also.
They look like an elephant facing left, a palm tree, a lion facing right, and a clear plastic protector.
Contact:
Bryan
Sterling, VA 20165
Posted: 7 November 2009
1981 Williams Pharaoh, Looking for Original Manual.
Contact:
Doug Huse
voice: 860-488-0169
New Milford, CT 06776
Posted: 7 November 2009
I am in need of the following backglasses. I will need to see quality photos of both the front and back of the glasses. E-mail me with your offers please!
Time Zone
Honey
Hang Glider
Gay 90's
Fun Fest
Contact:
Kevin Earsley
Illinois
Posted: 7 November 2009
I'm looking to buy the backglass for the Card Whiz Machine.
Contact:
Charles
voice: 216-651-2943
2437 Norwood Ave
Roslyn, PA 19001
Posted: 7 November 2009
I need a Coin Trough (or coin chute) for a mid 1960's Gottlieb coin door. I have a couple of photos of the exact part I need if that would help. Please let me know if anybody could help.
Contact:
Nick
Posted: 7 November 2009
Looking for a Captain Fantastic playing feild.
Contact:
Dan Moore
Ottawa, Ontario Canada
Posted: 7 November 2009
Looking for a rear door to a 1964 Williams 'Oh Boy' or similar machine.
Contact:
Gus Apple
voice: 3178626358
7440 Hickory Rd
Indianapolis, In 46259
Posted: 7 November 2009
Williams Algar, Looking for original manual and operations booklet.
Contact:
Doug Huse
voice: 860-488-0169
New Milford, CT 06776
Posted: 7 November 2009
Looking for a 1977 Solar City bottom cabinet with relay board and playfield. Can pickup at the Allentown show Nov 20, 21, 22. Somthing in restorable condition. I have a SC head. Need bottom cabinet.
Contact:
John
Allentown, PA
Posted: 6 November 2009
Looking for a backglasses for 1956 Gottlieb Auto Race
1962 Williams King Pin
Any help is greatly appreciated.
Contact:
Roger
Trumbull, CT 06611
Posted: 6 November 2009
Need 2 lockdown bars with the ends for older 60s Gottlieb Ship Mates and Gottlieb Fly Circus. Also looking for right side rail for those games. US SALES ONLY. Sorry Mate.
Contact:
Don
voice: 954-815-2045
Posted: 6 November 2009
1966 CC Super-Scope Rifle or Wild West Rifle
Need the flat bakelite board which is just below the gun assembly, which has all the target contacts. Needs to have all the wires intact (1 or 2 off is OK) and include the plugs and/or sockets. While I can get by with just the board I would love to have it still attached to the metal bracket with the two L-shaped brackets and the adjusting screws intact. I have a pic of the part I need if you think you have it but are not sure.
Also looking for an alignment tool for the same. It's the bracket which secures the barrel of the gun to allow adjustment of the contact board. It clips or screws onto the end of the barrel to hold it in place.
I only pay by check, money order or PayPal. NOT Western Union or MoneyGram so scammers can just stay away.
Contact:
Robert
Jacksonville, FL
Posted: 5 November 2009
Looking for 1977 Stern Stingray Backglass in good condition please. Prefer Canada or local
Contact:
Nf
Calgary, Ab
Posted: 5 November 2009
Need a nice plastic home run panel above the targets for a Major League.
Contact:
Ron
1224 Hillcrest Rd
Hartsville, SC 29550
Posted: 5 November 2009
Need an empty back box for a 1967 or 1968 Williams pinball machine. The specific machine is Casanova but any back box of that era will work. Don't need the back door, glass or insert, only the box. I only pay by PayPal, NOT Western Union or MoneyGram so scammers can just stay away!
Contact:
Robert
Jacksonville, FL
Posted: 5 November 2009
I am in need of the large white horse, on the lord of the ring's playfield, it's on the upper portion of the play field, please contact me if you have one.
Contact:
Steve Carter
voice: 503 409 5466
Posted: 4 November 2009
1980 Xenon- looking for cam/lock assembly for backboard.
Contact:
Joe Gawlik
1051 Highfield Rd.
Bethel Park, PA 15102
Posted: 3 November 2009
1995 Williams Attack From Mars, AFM center ramp needed.
Contact:
Andy Limerick
Jessup, Maryland 20794
Posted: 3 November 2009
Looking for a manual to 1984 Gottlieb El Dorado The City Of Gold.
Contact:
Christopher Schusler
IL
Posted: 3 November 2009
Mid 1950's Gottliebs. I need a game over lamp cover that was used on mid 50's Gottlieb games that had the ball count lights on the wooden apron.
Contact:
Sam Walker
voice: 828 389 6459
Posted: 3 November 2009
Looking for a bottom cabinet complete with playfield and motorboard for Gottlieb Extra Inning.
Need the upper left plastic (B-16047) for Gottlieb Bank Shot or Sure Shot (Same plastics were used on both machines). This plastic is the one over the top left side kickout hole. If someone is willing to scan this plastic and e-mail me the file, I that would help as well.
Need a mid-60s Gottlieb add a ball machine score card tray. This tray was used on several games from this time period. It has the red and blue dots around the outside. It does NOT have the hole to view balls in the trough.
Looking for the following heads with original paint (No guts or backglass needed, but will consider purchasing as well):
Williams Palooka
Gottlieb Cow Poke or Skyline (Their the same paint colors and pattern)
Want the following sheet metal back doors to heads:
1. Approx. 27 1/2" wide x 24 5/8" early 70s Gtb 2 or 4 player door.
2. Approx. 21" wide x 26 1/4" high late 50s Gtb single player door.
Looking for an empty decent original bottom cabinet and head for Gottlieb SNOW DERBY, SNOW QUEEN, or BRISTOL HILLS.
Need the following playfields either very nice or NOS:
Gottlieb ROTO POOL
Gottlieb CRISS CROSS
Can pick up at Allentown November 20th and 21st.
Contact:
Dave Metrando
voice: Cell: 845-464-3405
Highland, New York
Posted: 2 November 2009
Wanted - Gottlieb 1960 Captain Kidd backglass in good condition.
Also looking for the bottom 2 plastics and mid playfield metal that goes on top of the side bumpers.
Contact:
Tim Ewing
voice: 3372356462
Lafayette, LA 70506
Posted: 2 November 2009
I am looking for a Monster Bash pinball in good shape or better. I need the target toys to be responsive with all parts working correctly. I will only buy after personally playing your machine so please keep offers within a reasonable driving distance from Shreveport, LA. (4hrs max).
Contact:
James
voice: 318-210-4482
Bossier City, LA.
Posted: 1 November 2009
Lethal Weapon 3 Plastics:
I need the plastic that goes over the # 1 kickout hole on the left side and the plastic just above it also on the left side. The top left corner has a small piece missing too if that is available.
Contact:
Frank A
Jackson, NJ 08527
Posted: 1 November 2009
Looking for a backglass, for a 1954 Williams Colors machine. The one I have is flaked real bad.
Contact:
Ryan
Kansas
Posted: 1 November 2009
1969 Williams Seven Up
Looking for playfield plastics, backglass, tilt mechanism, coin gear and bell striker and spring from match unit
Contact:
Steve Sears
Posted: 31 October 2009
Exhibit Six Shooter 1951: wanted cardboard scenery inside of the game
Contact:
Tony Mather
Posted: 31 October 2009
I am in need of an Alien Star backglass or translite.
Contact:
Shawn
Posted: 31 October 2009
Looking for a Williams Widebody Loackdown bar.
Contact:
Jesse
Posted: 31 October 2009
Sinbad Eye Of The Tiger wanted plastics and or drop down targets approx year 1975.
Contact:
Garry Goodman
33 Mossford Lane
London, Essex Ig6 2ja
Posted: 31 October 2009
Wanted: Six pin release mechanisms for 63 shuffle bowler where plastic bowling pin attaches.
Contact:
Robert Moeck
386 Southhollow Rd
Stowe, VT 05672
Posted: 31 October 2009
1962 Chicago Coin Duchess Bowler Backglass (translite) wanted - good condition please
Contact:
Rich Nagle
voice: 440-582-1890
11795 Friar Post
North Royalton, OH 44133
Posted: 30 October 2009
1980 Bally Xenon Playfield - Reproduction or VERY good condition.
I just purchased a Xenon in really good condition, there is normal wear and tear on the playfield but over all it looks great. I heard that there was reproductions coming out 'soon' from a friend. It turns out that 'soon' ended up being last January (09), and they are all gone. I would love to get my hands on one of the new reproductions of that playfield. Preferably the Yellow version and not the Gold. This is my first Pin so excuse my novice. Any help or a point in the right direction would be greatly appreciated.
Contact:
Jason
Denver, CO 80218
Posted: 30 October 2009
1989 Data East Monday Night Football backglass
Contact:
Larry
Howell, Michigan USA
Posted: 30 October 2009
I am in need of an Alien Star backglass or translite.
Contact:
Shawn
Erie, PA
Posted: 30 October 2009
Looking for a 3" Bally Bell for a 00-90 stepper unit used in 1965 to 1974 era games. This is the bell with the threaded mounting stud welded in place on the bell that mounts to a tab on the stepper unit.
If you have a bell for sale, please let me know.
Contact:
Kory Hankin
MD
Posted: 30 October 2009
Looking for a No Fear plastics set and the assemblies that were sold outside of the set like the skydiver and the one that has the wooden block attached that goes under the mountain.
Contact:
Kevin Plaivech
voice: 361-249-8980
Corpus Christi, Texas
Posted: 30 October 2009
Looking for a soundboard for a Data East WWF Royal Rumble. Part # 520-5077-00
Contact:
Ronald Coon
Maumee, OH
Posted: 30 October 2009
Still looking for the following backglasses (yours doesn't have to be mint condition, 'presentable' is fine):
- 1981 Williams Jungle Lord
- 1981 Williams Barracora
I will be coming to the Pinfest pinball show in Allentown, so pickup there would be great.
Contact:
Bill
Downingtown, PA 19335
Posted: 30 October 2009
I am in need of the left elevator door on the game Cross Town. If by chance you have it and it is intact, I would be interested in it.
Contact:
Steve Fein
Auburn, WA. 98001
Posted: 29 October 2009
I am in need of the lower right hand plastic for the game 2001.
if you have the set I could also purchase it if you don't want to split the set.
Contact:
Steven Fein
Auburn, WA. 98001
Posted: 29 October 2009
I am looking for a backglass for Aladdin's Castle.
Contact:
Mike
675 Hunters Glen Drive
Gahanna, Ohio 43230
Posted: 29 October 2009
Looking for a Chicago Cubs Triple Play Back Glass or Display Glass.
Any help or info would be great !!
Contact:
Matt C
Bloomington, Indiana US
Posted: 29 October 2009
Backglass, any condition, 1957 Gottlieb Continental Cafe.
Backglass, any condition, 1957 Gottlieb Whirl-Wind.
Wiring Schematic & Backglass 1956 United Pirate Gun.
Contact:
James Sullivan
Arlington, Virginia 22204
Posted: 28 October 2009
In need of a decent Bally coin box with lid and plastic inserts for late 70's early 80's SS games, eg. Xenon, EBD etc. Also anything related to Xenon
Contact:
Rich
Blackwood, NJ
Posted: 28 October 2009
1991 Bally Bugs Bunny Birthday Ball any plastics, flippers or parts.
Contact:
Gary
Posted: 27 October 2009
I am looking for the left and right side ramps for the Cyclone pinball machine.
Contact:
Scott
Mendon, MA 01756
Posted: 27 October 2009
I've picked up a project Williams Space Shuttle and I'm looking for the following parts. Let me know if you've parted out a Space Shuttle and have any of the following.
WMS - Space Shuttle Backglass
Space Shuttle Toy that goes over ramp (non-yellowed)
Please e-mail or call me with what you have and condition as well
as price.
Contact:
Craig Hassell
voice: 214-632-5537
Forney, Texas
Posted: 27 October 2009
Looking for Data East/Sega green portal credit switch button. Mine got crushed by bracket closing coin door. Anyone know who might have one?
Contact:
Billt Strasser
Posted: 27 October 2009
1977 Gottlieb Jet Spin Backglass. mint Please.
Contact:
John Lescher
14 Fox Run
New Providence, NJ 07974
Posted: 26 October 2009
1978 Gottlieb Neptune and 1963 Williams Skill Pool Backglasses. Must be NOS or very nice. Let me know what you have.
Contact:
Jack
Atlanta, GA
Posted: 26 October 2009
I need a back glass for a 1986 Special Force or 1987 Special Force Girls Pinball Machine.
Contact:
Don
Topeka, KS
Posted: 26 October 2009
Stargate playfield, NOS or decent used.
Contact:
Tom
Posted: 26 October 2009
Looking for the following parts for my Johnny Mnemonic 1995 Williams JM WPC WPC/s
Spinner 04-10216.1 (any condition)(does not need decals I have new ones)
Translight
Speaker panel plastic
launch ball button, cab latch assy, spinner washer, translight plastics (i want these only if you have something else I need)
Williams/Bally coin door parts as follows (for same game)
2 buttons assys and springs (button, 25cent panel, and holder)
1 assembly that holds the button and the top of the coin mech with coin slot
Lower left small blank plate
I would also be intrested in an entire door assy.
They are listed in order of importance
Contact:
Ed Owens
Stevens Point, WI
Posted: 26 October 2009
Does anyone have Teds eyes for Road Show? If so please contact me.
Contact:
David Barber
Lakewood, CO 80226
Posted: 25 October 2009
WTB: motor for Sega EM - PN. 92327 Motor 27rpm 12v
I am looking for a motor which was used in several Sega EM arcade games. The part number is 92327 and the motor specs are 27rpm 12vdc.
Contact:
Derek
Posted: 25 October 2009
1976 Chicago Coin Sound Stage backglass let me know the condition and price.
Contact:
Randy
Pueblo West, CO 81007
Posted: 24 October 2009
Need a backbox for a 1967 or 1968 Williams pinball machine. The specific machine is Casanova but any back box of that era will work. Don't need the back door, glass or insert, only the box.
I only pay by PayPal, NOT Western Union or MoneyGram so scammers can just stay away.
Contact:
Robert
Jacksonville, FL
Posted: 24 October 2009
1958 Gottlieb Gondolier
Looking for lower playfield plastic flat triangular pieces.
Image of lamp post with '10 points when lit' on piece.
Contact:
Bruce Herman
Posted: 23 October 2009
WTD Early Data East Speaker Panel. It is the plastic one that was used on the early machines like Monday night football, Laser War, Playboy, Robocop, Secret Service, Torpedo Alley, and some others I can't think of. Prefer to be one from a parted machine that has the speaker too but doesn't have to have.
Contact:
Greg
Muskegon, MI
Posted: 23 October 2009
1980 Bally Viking backglass. Looking for a mint copy with no lifting, peeling, scratches, "water spots" (which is really delamination), etc. Let me know what you have, will pay accordingly.
Contact:
Jim Heck
Chelmsford, MA 01824
Posted: 22 October 2009
EARTHSHAKER Sinking building mod wanted!
Contact:
Rob
Posted: 22 October 2009
1976 Stern Disco
Parts needed
1, 10's, 100's and 1000's reels for player 1
Playfied if anyone has one
plastics partial or all
bumper caps
double spinners replacements
Contact:
Steve Campbell
Norman, OK
Posted: 21 October 2009
I am looking for a complete Cosmic Cottage assembly for my Party Zone Pinball machine. I could also use a right ramp.
Contact:
Greg Netardus
voice: 940
5 Robins Nest
Hickory Creek, TX
Posted: 21 October 2009
In bad need of a alphanumeric display (player 2) for a Data East 'Time Machine' Pinball Machine. I'll even take all 4 displays plus board if the price is right.
If you have only 1 alphanumeric then that's great. Please no burning displays.
Contact:
Charles Lyell
3968 Sleepy Hollow Rd.
Rives, TN. 38253
Posted: 21 October 2009
1965 Williams Pot O Gold
Parts Needed
Male receptors in head for Bagatelle
Back Glass
1, 10, 100 and 1000 Reel's
Credit Unit
Ball in Play Unit
Manual and/or Schematic's
Contact:
Steve Campbell
Norman, OK
Posted: 20 October 2009
Atari Middle Earth Display
Contact:
Robert Penhollow
Royal Oak, Michigan
Posted: 20 October 2009
I'm after a Twilight Zone bridge diverter assembly that mounts under the playfield, part number a-16361.
Contact:
John Fraklin
Posted: 20 October 2009
I'm hoping that someone out there might have or be able to tell me where I might get a complete set of cabinet art decals for my Guns n Roses pinball. I am also looking for the gun assembly that launches the balls.
Help Someone please.
Contact:
Mark
Belfast, Northern Ireland
Posted: 20 October 2009
Looking for a Bally C-972-1 red nylon kicker post that is used on Medusa and Fireball 2. Are there any left out there?
Contact:
Kevin
Posted: 20 October 2009
Looking for both ramps to Gottlieb, Genesis - new or used(not cracked or chipped) - any vendor known to carry parts for this machine would also be appreciated
Contact:
Paul Breslin
voice: 716-457-3449
6367 Maple Hill Road
South Wales, New York 14139
Posted: 20 October 2009
Wanted: Complete coin door 62-64 United Williams Shuffle Alley 10 cent opening on top.
Contact:
Robert Moeck
386 Southhollow Rd
Stowe, VT
Posted: 20 October 2009
Looking for 2 Bally AS-2518-35 MPU boards. Boards must be in good working condition.
Contact:
Paul
Posted: 18 October 2009
1991 Williams Terminator 2 - looking for the Hunter Killer ship. Any reasonable condition considered, but please send a photo. Scammers will be laughed at heartily.
Contact:
Joe Entropy
Derwood, MD
Posted: 17 October 2009
1992 Data East Hook backglass wanted and display under backglass.
Contact:
Miriam Schaefer
voice: 732-618-3335
5 Boud Ave
Farmingdale, NJ 07727
Posted: 17 October 2009
Williams WPC Audio Board A-12738 - would prefer working and tested, but let's see what's out there. It would be nice if it had Terminator 2 ROMs in it, but I can get my own if necessary. Scammers: Don't even try, this is way beyond you.
Contact:
Joe Entropy
Derwood, MD
Posted: 17 October 2009
WTB Gottlieb Dragon playfield glass and backglass in good condition.
WTB one individual Gottlieb Fast Draw playfield plastic: left side gun shooter.
Contact:
Benjamin Artherholt
voice: 757-652-7789
Virginia Beach, VA 23451
Posted: 17 October 2009
I have a 1959 Bally Challenger Bowling machine, and am looking for a 4 foot section of lane to go on my extension. All I need is the top part (lane) the one I have is brownish in color, and does not match the front or rear sections. mine are grayish in color, with the lines on them.
Contact:
Marvin Pensala
Waukegan, Illinois 60087
Posted: 16 October 2009
I'm looking for an NOS or very nice Gottlieb Jungle King Backglass. If you have one please let me know.
Contact:
Jack
Atlanta, GA
Posted: 16 October 2009
Doctor Who Mini Playfied Mounting Bracket. Looking for a mounting bracket which holds the mini playfield motor on a Dr Who. The part number is 01-10421
Contact:
Derek
Posted: 15 October 2009
Looking for the following parts.
Earthshaker - Looking for NOS or near mint plastics set, or peice by peice if need be, let me know what you have. NOS full ramp set w/decals wanted as well.
NBA Fastbreak - Looking for the small Basketball plastic only located on the metal diverter above left ramp. Topper wanted as well.
Contact:
Rob V.
Posted: 13 October 2009
1971 Gottlieb Dimension playfield plastics set: NOS, used or partial. Please let me know what you have. Also Dimension instruction card set: NOS or nice used.
Contact:
Paul
WI
Posted: 12 October 2009
I am searching for a Chicago Coin Basketball Champ head. I recently purchased the game but the wooden head with backglass is in poor condition. Any help would be appreciated.
Contact:
Bert Oppenheim
voice: 508 320-9725
Posted: 12 October 2009
Looking for a working or non-working 80A MPU from a Gottlieb Caveman. Let me know what you have.
Contact:
Randy
Burton, MI
Posted: 12 October 2009
Wanted: Gottlieb Marble Queen backglass
Contact:
Mark Niemkiewicz
Posted: 12 October 2009
1977 Gottlieb Jet Spin or Super Spin plastics. These two playfields are exactly the same. The two largest ones at the top of the playfiled are the ones that I need the most. One of them is cracked in half with one half missing. The other one is cracked in half and both halves are present. Would also settle for a high res scan of the plastics. If anyone can help me, please call or email. In the middle of a restoration on this machine and would like to make this complete and presentable.
Even if you can just offer suggestions on what to do, I'll take it.
Contact:
Chris Campbell
voice: (717) 724-2991
Carlisle, PA
Posted: 11 October 2009
I'm looking for a Williams system 11 MPU. Must be in working condition - ready to bolt in and fire up my Williams Road Kings pin. What do you have?
Contact:
Joe
Posted: 11 October 2009
Looking for a good condition "Skill Ball and/or Add-a-ball" backglass.
I was told a repro of Add a ball was made in the past. Any leads is much appreciated.
Contact:
Nicolas Queiroz
Fairfield, Connecticut
Posted: 11 October 2009
Skull needed for top of Gottlieb Bone Busters Pinball machine; must be in good working condition. Please call or e-mail if you have one available.
Contact:
John Russo
voice: 941-650-4135
5620 14th St W
Bradenton, FL 34207
Posted: 11 October 2009
I am currently rebuilding a 1956 Gottlieb Score-Board. I am looking for a playfield that may be in better condition then mine. The plastics are realy warped also, so better plastics would good. The ball shooter Guard is cracked.
I also am looking for Parts/Manuals For a 1966 United Tango shuffle bowl unit. If you have pictures of a restored or orignal one I could use them or is you know about this unit or someone to help with info on this unit. It has some relays that were cut from it and I am having a hard time finding out what they should be.
Contact:
Edward Stedman
Posted: 10 October 2009
Looking for the following backglasses;
1945 Keeney Supercharger backglass
1947 Williams Suspense backglass
Midway Flying Carpet (rifle game) backglass
CCN Rocket Shuffle backglass
H.C. Evans Bangtails or Winterbook glass
* please email picture as condition does not have to be a 10
Contact:
Robert Forristall
voice: 618-214-8191
412 West 3d Street
Bluford, Illinois 62814
Posted: 10 October 2009
WTB Head for 1971 Bally Sea Ray any condition
Contact:
Tony
Indiana
Posted: 10 October 2009
Looking for
Sega/Stern CPU for Starship Troopers
Eightball Deluxe Backglass (any condition)
Gottlieb System 3 boards working or not
Bally Star Trek backglass
Bally Playboy backglass
Beat AF playfield for my wall.
Contact:
Quentin Parker
1225 Woodbourne Ave
Pittsburgh, PA 15226
Posted: 9 October 2009
Looking for decent Guns n Roses Data East pinball in North Carolina or South Carolina. Give me a call if you can help-Brian 704 904 1512
Contact:
Brian
Posted: 9 October 2009
Wanted: NOS playfields for '79 Buck Rogers and '78 Strange World. Have a NOS playfield for Capcom Breakshot for trade or for sale.
Contact:
Ernie Liffers
2150 Pilgrim Mill Cir
Cumming, Georgia 30041
Posted: 9 October 2009
1987 Gottlieb Monte Carlo System 80b Power board and translite.
Contact:
Drew Nicholson
Posted: 8 October 2009
wanted mint williams batting champ backglass
red plastic super homerun piece where balls go thru for home run
plastic ramps where balls run up for home runs
Contact:
Stuart Green
Binghamton, NY
Posted: 8 October 2009
Bally AS-2518-23 Lamp Driver: $35.00
Nice clean board with all new header pins. Tested to work 100%.
Include a connector kit for $12.00 more.
Buyer pays all shipping, and I ship anywhere. Photo available, just ask. Payment options include Paypal, US POSTAL money orders, or cash in US dollars. Sorry but no personal checks, cashier's checks, or money orders other then US POSTAL.
Contact:
Steve Kulpa
Nashville, TN
Posted: 7 October 2009
1980 Gottlieb Time Line sound prom 659.
Contact:
Patrick Sullens
3330 Nicholson Road
Westminster, MD 21157
Posted: 6 October 2009
Looking for backglass for Bally Challenger Bowling Machine (big ball type machine 1960?). Repro would be okay, or just in good shape
Contact:
Marvin Pensala
voice: 847-377-2083
Waukegan, Illinois 60087
Posted: 6 October 2009
Looking for lower-cabinet componants that control the turret and ship movement for the Midway game Sea Devil.
Contact:
Larry Jenks
15689 Ponderossa Lane
Auburn, CA 95603
Posted: 6 October 2009
1930s Bally pinball machines wanted
Looking for 1930s Bally pinballs that are other then the bingo type. Also other antique [1920s-30s] game wanted Genco, Stoner etc.
Contact:
Byron Hoffman
5015 SW Taylors Ferry Rd
Portland, Or 97219
Posted: 5 October 2009
1930s Genco Criss Cross backglass section
Need the backglass and scoring section for a 1930s Genco Criss Cross.
Contact:
Byron Hoffman
5015 SW Taylors Ferry Rd
Portland, Or USA
Posted: 5 October 2009
1976 Bally Old Chicago backglass in good to mint.
Contact:
Jason Lamborn
voice: 8015124670
12627 Bridgecreek Way
Draper, Utah
Posted: 5 October 2009
Looking for a plastic lightshield set for a Gottlieb Target Alpha.
I could pick this up at the upcoming York, PA show, or the November.
Contact:
Joe
New York
Posted: 5 October 2009
Need metal score/instruction card frames for a Williams woodrail, circa 1957, such as those on 'Reno' and 'Jig Saw'. There is one larger one, the size of a normal S/I card, and a smaller one that looks to be the size to hold a large business card. I would like to pick these up at the upcoming York show, or the November Allentown show, so if you have one or both, shoot me an email please.
Contact:
Joe
New York
Posted: 5 October 2009
1969 Bally Op-Pop-Pop left flipper assembly needed.
Contact:
Ed
Montoursville, PA 17754
Posted: 3 October 2009
1995 Dirty Harry ramp protector. Helicopter ramp Side closest to warehouse ramp also if you have it.
Contact:
Frank
voice: 2402749791
18240 Village Center Drive
Olney, MD 20904
Posted: 3 October 2009
Looking for 71 Gottlieb Home Run Backglass in good condition
Contact:
Wayne Ashcraft
Meeker, OK 74855
Posted: 3 October 2009
Looking for the left and right side ramps for Cyclone. Would buy a complete set if you have all 3.
Contact:
Ed
Rhode Island
Posted: 3 October 2009
1994 Data East Tommy Topper Silver Ball
Contact:
Aaron
Omaha
Posted: 2 October 2009
Gottlieb Rack A Ball playfield plastics
Contact:
Tony Mather
Posted: 2 October 2009
Looking for:
1) a VG+ condition set of Williams EM - OXO plastics.
2) center O-X-O center grid plastic. Must be VG+, no delamination.
Contact:
Don Owen
Posted: 2 October 2009
No Fear plastics, new or used, not broken, not scratched, not cracked.
Specifically:
The long one which separates the Tube shot from the left Raceway orbit.
A one-piece Drop Zone/Sky Diver plastic (I have a reproduction of the skydiver end I'll install or use to get a scan for reproduction if I can't get the whole thing in an easy-to-use form).
Contact:
Drew Eckhardt
Menlo Park, CA 94025
Posted: 2 October 2009
1960 Gottlieb Spot A Card
Looking for a decent to good condition playfield for Spot A Card
Contact:
Sam Walker
voice: 828 389 6459
Posted: 1 October 2009
1950 Chicago Coin Punchy backglass wanted.
Will pay your price for a NOS or an 8 or better glass. Not interested in glass that is less than an 8.
Contact:
Rick
Posted: 30 September 2009
1969 Gottlieb 4 Square, I need both slingshot plastics, must be nice with no chips or cracks, If you have one or both please let me know.
Contact:
Homer Stevens
voice: 989-689-5159
Hope, MI
Posted: 30 September 2009
1995 Bally Who Dunnit, Translite (Backglass) must be in excellent condition
Contact:
David F. Silverman
voice: 240 372 3333, fax: 301 384 2779
614 Cannon Road
Silver Spring, Maryland 20904
Posted: 30 September 2009
Wanted parts for resto of Williams Grand Prix - 1976
Plastics, drop targets, bumper caps, flipper buttons.
A nice backglass would be good (but shipping os?)
Contact:
Wolfy
Australia
Posted: 30 September 2009
1981 Bally 'Medusa'- looking for very good condition score card holder (apron).
Contact:
Miles
voice: 801-272-0221
Salt Lake City, UT
Posted: 29 September 2009
I'm looking for the playfield plastics for Gottlieb's Abra Ca Dabra. It doesn't have to be a complete set.
Contact:
Frank Genovese
voice: 250-423-9288, fax: 250-423-9291
Posted: 29 September 2009
1988 Bally Truck Stop ramp assembly. New old stock or excellent used. USA only.
Contact:
Skip Geear
voice: (541) 826-2177
Eagle Point, Oregon
Posted: 28 September 2009
Looking for a backglass for a 1975 Triple Strike. Little or no flaking please.
Contact:
Kreig
Orangevale, California
Posted: 28 September 2009
I'm looking for a working Gottlieb Sys. 1 sound board that goes in a Genie. This would be the 2nd Generation board with the heat-sinked regulator.
My PROM is fine, just the working board is all thats necessary.
Contact:
Keith Holbrook
voice: (972)207-6228
Bedford, TX
Posted: 27 September 2009
Looking for either Gottlieb Volcano backglasses.
Contact:
Evan
voice: 416-519-8199
Toronto, Ontario Canada
Posted: 27 September 2009
1995 Sega Batman Forever right ramp plastic
Contact:
Adam Smith
voice: 920-232-9238
Posted: 26 September 2009
Evel Knievel cabnet in good to excellent with head cabnet wanted. Back glass and playfield are not needed. You can email me a collins3076@netzero.net or call me at 813-240-6590. Located in Tampa Florida.
Contact:
David Collins
voice: 813-240-6590
11209 Donneymoore
Riverview, FL 33569
Posted: 26 September 2009
>Original steel (not repro) wedgehead back door (silver colored) in near mint condition, for my King of Diamonds.
I don't need lock or key. (818) 521-5000 is my cell phone but you can call me at home (818) 758-1919. Or you can email me as:
lawcal (at) roadrunner (dot) com
Contact:
Robert Rentzer
voice: 818 521-5000
5011 Casa Drive
Tarzana, California 91356
Posted: 26 September 2009
Updated list as of 9/22/09
Black Knight Metal Ramps, and all stanless from playfield $25.50
Tales from the crypt New Sling shot Plastics $22.50
Lot of 6 White Bally Lane guides, they have Bally printed on them,
$22.50
Addams Family New Sling Shot Plastics $22.50
Twilight Zone New Sling Shot Plastics $22.50
Bally Playboy Sling Shot Plastics, Used $19.50
Congo New Sling Shot Plastics $12.50
Bally Power Supply, From a Space Invaders, Untested Complete, $65.00
Contact:
Randy Donathan
voice: 972-921-9817
Po Box 243
Milford, Texas 76670
Posted: 26 September 2009
Looking for a Bobby Orr Power Play in good working condition that will compliment my Home Hockey theme sports bar. I have seen them from $500.00 to $1200.00 range for good used machines, but they seem to be a good driving distance from me. Hoping to get something a little closer to Rochester in the $500.00 to $1000.00 range.
I am willing to drive to pick it up (US only and relatively close to Rochester, NY). If anyone in Canada has one and can get it over the border to Buffalo that will work as well.<(Not sure if thats even possible) If you can help me out, please send me an email.
Contact:
William
Rochester, NY
Posted: 25 September 2009
Wanting to buy Martians for an Attack from Mars (the little green guys) should anyone have any for sale.
Contact:
Paul
Posted: 24 September 2009
Wanted: Addams Family part, I need the thing at the top right of the playfield. I need the whole assy. The pinball I have is missing it.
Contact:
Victor Salome
voice: 614-622-1515
879 East 5th Ave.
Columbus, Ohio 43201
Posted: 24 September 2009
Instruction cards for Gottlieb Happy Clown, Thoro-Bred, Criss Cross and World Fair - after original excellent condition.
1952 Williams Domino backglass
1961 Gottlieb Big Casino - looking for a nice set of playfield plastics (there are only 2 near the flippers)
1965 Gottlieb THORO-BRED playfield plastics - in excellent condition
1955 Gottlieb JUBILEE: Need a scan of the 3 playfield plastics. Have a beautiful game with no plastics. Please help.
Contact:
Tony Mather
Posted: 23 September 2009
Backglasses wanted: Williams Coquette, Big Deal. Bally Rockmakers, Op-Pop-Pop. Midway 1 Million BC.
Contact:
Carl
voice: 480 552 9476
Mesa, AZ 85202
Posted: 22 September 2009
Harlem Globetrotters on Tour Playfield in good condition and wired would be nice.
Contact:
Charles Morris
Princeton, WV 24740
Posted: 22 September 2009
Paragon backglass wanted. Will purchase or trade a glass that you need.
Contact:
Joe Wager
voice: 717-272-7052
520 Lehman St
Lebanon, PA
Posted: 22 September 2009
1965,1966 Williams 25 inch Legs. Used in games like Alpine club, Ski Club, Big Chief, Bowl A Strike, Lucky Stike, Eager Beaver, Moulin Rouge, Pot O Gold, Teachers Pet, Eight Ball, A-Go-Go. Need Two
Contact:
Steven Wolejko
voice: 860-371-4008
168 Quarry Brook Drive
South Windsor, CT 06074
Posted: 21 September 2009
Any parts for the seeburg shooting games (amplifiers, motors, platforms, figures, guns, scenery, cabinets upper and lower, ) games such as jail bird, chicken sam.
any parts for war conversion games (amplifiers, motors, platforms, figures, guns, background scenery, cabinets upper and lower) any mechanisms.
Contact:
Robert Berthiaume
Florida
Posted: 21 September 2009
Looking for a Bally 'Strikes & Spares' backglass. In VG+/NM condition. If you got the goods, please call me on my cell at 404-966-2051
NOTE:
Due to the large amount of scam emails generated from/that posting on this site generates, we will only respond to direct phone calls to the number provided above. Also, we are not interested in purchasing from overseas due to shipping cost/delays/customs/other stuff such as scammer risks. U.S. residents looking to part with this backglass need only reply, please.
Contact:
Tom Grizzard
voice: 404-966-2051
Marietta, GA 30067
Posted: 21 September 2009
Looking for a blue dome light cover for a Data East Lethal Weapon 3 machine. Must not be cracked or broken.
Contact:
Jm P. - Jt Amusements
voice: 717-564-1032
Harrisburg, PA
Posted: 21 September 2009
Looking for decent used or NOS upper backglass for a 1960 United Sahara big ball bowler.
Contact:
Tom Garcia
Whittier, CA 90601
Posted: 21 September 2009
1984 Gottlieb Jacks to open, Center Plastic needed.
Contact:
Scott Morash
voice: 207-727-3876
56 Ledgewood Drive
Hollis Center, Me 04042
Posted: 20 September 2009
Looking for a Gottlieb Sinbad lower cab and pedestal. Can be gutted, as long as it's structurally sound, (no termite or water damage, or large chunks of wood missing). Local to PA, (don't want to ship in). Can pick up at the York Show on Oct. 9th or 10th.
Also, looking for the right slingshot plastic for a Gottlieb Raven. NOS or used, as long as it's not cracked, chipped, or broken.
Contact:
Jim P. - Jt Amusements
voice: 717-564-1032
Harrisburg, PA
Posted: 20 September 2009
Wanted NOS or good used motor for Rifle game. The motor will replace a multiproducts motor that is a 100rpm, 50volt motor and drive a bicycle chain. My game is a Williams Bonanza but I am sure other games used the same one. The multiproduct spec is 1909.
Contact:
Robert Draper
Peterborough, Ontario K9k 2r1 Canada
Posted: 20 September 2009
1950's - 2000's Pinball Flyers
Looking to buy pinball flyers to expand my collection. I especially need US flyers from the 80's and earlier, flyers from non-US manufacturers (like Recel, Bell, Inder, etc.), and flyers not in english (like German versions of flyers). Plese let me know what you have. I also have a ton of extras if you are interested in trading.
Contact:
Chris
NY USA
Posted: 19 September 2009
Looking for sling plastics for a Gottlieb Volcano.
Contact:
Kim
Posted: 18 September 2009
1988
Data East
Torpedo Alley plastics.
I need the left inlane guide plastic and the small plastic from infront of the lower bumper. I could also use spare slings of you have them.
If you can help drop me a mail.
Contact:
Eddie Mole
United Kingdom
Posted: 17 September 2009
1994 Data East Guns N' Roses wire-form shooter lane right ramp, part#515-6007-00
Contact:
Ryan K.
300 N Akard Street
Dallas, TX United States
Posted: 17 September 2009
Looking for at least 1 decagon score reel unit complete assembly(flat face not round) for a 1970 GTB EM game;either a tens or hundreds unit-all switches must be intact & not broken! Also looking for a complete & intact coin door with coin mechs (mechanisms) & wiring harness included;and a coin entry plate with the plastic coin value/entry pieces inc.Shipping would be to 13501.
Contact:
Ken Robinson
voice: 315-335-9985
218 Higby Rd.
Utica, NY 13501
Posted: 17 September 2009
Looking for a DE Lethal Weapon 3 pin dome light cover.
Contact:
Johnny
Posted: 17 September 2009
1977 Gottlieb Golden Arrow: I'm looking for a nice pair of lower slings for this machine but consider a full set if you dont want to split.
Contact:
Doug Redfarn
England, UK
Posted: 16 September 2009
1979 Gottlieb Genie backglass--my machine is missing the backglass, I'm looking to find something nice but will buy just about any Genie backglass I can get my hands on, please help me out on this. It's been a long and agonizing search.
Contact:
Jason Anderton
voice: 801 725 2590
Layton, UT 84041
Posted: 16 September 2009
I am looking for the wireform that goes behind the right drop target bank on the upper playfield of Black Kight. It should just be a simple U shape to protect the back of the target bank. If you are parting out a machine and can assist with this, it would be appreciated.
Contact:
Stephen
NJ
Posted: 15 September 2009
1978, Gottlieb Genie backglass, I'm looking for a backglass for my Genie machine, also need popbumper caps, the glass was broke out when I bought the machine so at this point I'd just like to have a backglass does not need to be mint but I'd be willing to pay for something that is very nice, please dig through your stuff and help me asap, an otherwise very nice machine is looking a little rough and I'd be very greatful if someone could help me out.
Contact:
Jason
voice: 801-725-2590
Layton, UT 84041
Posted: 14 September 2009
1) Whitewater topper and used boulder caps in good condition
2) 1991 Williams Terminator 2- need plastics
3) Original Stern Stargazer/Nine ball/Catacomb manual
4) Looking for used T2 and Star Gazer playfield, any condition considered.
5) NOS Theatre of Magic translite
6) Stern Catacomb backglass
7) Flyer- Black Knight
8) T2 Skull assembly
9) Haunted House- big Spider web plastic that goes over lower playfield.
Looking to purchase the above parts. Please send me condition and price.
Contact:
Rob
Ashburn, VA 20147
Posted: 14 September 2009
Gottlieb 'Gong' present in 1957 Ace High.
Any info, picture, where/if it's in any spare parts catalog.
I am pretty sure that it was put on that woodrail only. But I don't know the reason.
I never found any description of it in any Gottlieb parts catalog.
Any help will be welcome, always at disposal for info, tips, etc.
I am an old (62) woodrail pinballs private fan, expert fixer and connoisseur.
Contact:
Bruno Zappaterra
Italy
Posted: 14 September 2009
Looking for Super Mario Bros playfield upper and lower. Will take either if you have, must be in good shape, no wear. Please email.
Contact:
John R
voice: 604 436 5553
7907 Suncrest Drive
Burnaby, Bc V5j3n4
Posted: 14 September 2009
1960's Bally: silver painted coin door (complete) wanted. Door accepted 5 cent,10 cent and 25 cent. This door was used on Bally games such as: Fun Cruise, Gold Rush, Campus Queen, Loop the Loop, Bazzar, Capersville and Safari.
Contact:
Rich
St. Louis, MO. 63128
Posted: 13 September 2009
1975 Williams Pat Hand Play Field Plastics Wanted.
Contact:
Glen Henson
voice: 559-240-7749, fax: 559-292-1299
3793 N. Hammel Way
Fresno, CA 93727
Posted: 13 September 2009
Wanted:
I Am needing four legs for a 1978 Brunswick Alive or Aspen home pinball machine.
Contact:
Dave Jackson
voice: 740 215-2291
2925 Carroll-southern Rd
Carroll, OH 43112
Posted: 13 September 2009
1975 Williams Pat Hand Play Field Plastic
Contact:
Glen Henson
voice: 559-240-7749
Fresno, CA
Posted: 12 September 2009
I'm looking for a complete AS Relay (Miniature Stepper) for my 1975 Gottlieb Atlantis. Have one?
As pictured on Pinrepair.com.
Contact:
Kev
Brampton, Ontario Canada
Posted: 12 September 2009
Looking for a backglass for Uniteds 'Super Bonus' puck bowler.
Contact:
Bob Hollingshead
Posted: 12 September 2009
Wanted: Bally Amigo backglass. Good to very good condition.
Contact:
Al
Posted: 12 September 2009
I want to buy playfield plastics for my Police Force Pinball Machine. I also want to purchase the promotional baseball cap that came with the game.
Contact:
Mark
Posted: 11 September 2009
Looking for NOS playfield for Gottlieb Spiderman. Also any NOS playfields from the past, I'm not a dealer, my father and I enjoy restoring games, then put in our collection.
Contact:
Ken White
voice: 650 400 0207
833 N Idaho St
San Mateo, CA 94010
Posted: 11 September 2009
Looking for the orange plastic for the supercharger entrance on Williams Getaway.
Contact:
Mark Wagner
Posted: 11 September 2009
Bally Who Dunnit 1995 Centre Ramp Plastic of three ramps wanted.
Contact:
Richard Coathup
voice: 0408032080
Po Box 269
Ferntree Gully, Victoria Australia 3156
Posted: 10 September 2009
I am looking for a nice King Tut backglass.
Contact:
Ciske Vreuls
Hanzestraat 6
Gendt Holland
Posted: 10 September 2009
Playfield Plastics for Gottlieb games:
1973 Jack in the Box/Jumping Jack
1975 Abra Ca Dabra
1976 Royal Flush/Card Whiz
1973 Hot Shot/Big Shot/Pro Pool
1976 Target Alpha
Bally:
1969 King Tut
1978 Playboy-plus bumper caps, drop targets
Contact:
Gary
Posted: 10 September 2009
Bally Strange Science:
Playfield, particle separator ramp and blue anti-gravity ramp.
Gottlieb Gold Wings:
playfield, backbox topper.
Gottlieb Buck Rogers:
complete coin door with frame. I think any system 1 will work.
Stern Lightning:
playfield plastics will consider complete playfield.
Data East Secret Service:
The ferrari that sits on the capitol building.
Contact:
Mike Goode
Elburn, IL
Posted: 9 September 2009
I am working on a project to take a Whitestar game - apply my custom decal set and a new populated playfield. So, I need everything except the playfield. Cabinet can be in rough shape and boards not working. I can pick up at Expo. I live near Detroit.
Whitestar games -
A13
GE
ID4
SJ
SWT
LW
SST
Viper
LIS
Godzilla
SP
HD
SX
SST
HRC
AP
SS
MONO
PLAYBOY
RCT
SPP
T3
LOTR
RBION
ELVIS
SOPRANOS
NASCAR
Contact:
Mark Bakula
Dexter, MI 48130
Posted: 9 September 2009
Looking for a Pinbot Playfield in decent condition. Pictures and price can be sent to the email listed here.
Contact:
Nicolas Queiroz
Fairfield, CT
Posted: 9 September 2009
Funhouse Bally 1990 any part/plastic considered
Contact:
Maria Rands
voice: 01525406116
67a Station Road
Bedfordshire Mk45 2qu
Posted: 8 September 2009
1974 Gottlieb Top Card.
I need the play field plastic piece that fits the right side SPECIALS lane. It is the clear yellow piece that fits under the actual PF plastic, which is attached by split posts. Part # listed below. Call for more details.
Part # A-1505B-R
Contact:
Dan Yaugo
voice: 714-262-0722
Murrieta, CA
Posted: 7 September 2009
1966 Bally Capersville playfield any condition. I would like to pick-up within a 300 mile radius of St. Louis Mo. I will consider others if you will take the parts off the playfield. Rich 314-302-4488
Contact:
Rich Grant
voice: 314-302-4488
2111 January Ave
St. Louis, MO. 63110
Posted: 6 September 2009
Data East - TIME MACHINE. Looking for a replacement left plastic ramp with no cracks or repairs done on it and a new back glass.
Contact:
Matt Jarvis
39 Ridgewood Crescent
Birkenhead, Auckland New Zealand
Posted: 6 September 2009
I need the head (backbox) for a Williams Ten Strike or Ten Pins bowling game in any condition, Please contact me if you have a head or any parts for the head assembly.
Contact:
Ron Gaukel
voice: 760-687-5749
San Diego, California
Posted: 6 September 2009
Looking for an NOS set of playfield plastics for a No Fear Pinball.
Contact:
Mike Milligan
San Jose, CA
Posted: 6 September 2009
Bally Score Motor Cap't Fantastic era. 1975, 1976 Style. Could from any game just must be that type motor.
(516) 424-5528
Contact:
Mitch
voice: (516) 424-5528
Posted: 5 September 2009
I need the following items:
Stern Lightning Playfield(s) - I need the upper and lower playfields. Mine are water damaged badly and the paint is flaking off as well. They are toast!
Williams Space Shuttle Playfield - Mine is wasted from wear.
I will take worn examples, but please submit a picture as it will need to be better than the ones that I have now. Don't worry as it probably will be better than what I have.
I also need:
Stern Voice Synthesizer Board (for Stern Lightning)
Whirlwind Fan Bracket: Mine is missing... Arg!
Contact:
Brandon Jones
voice: 903-244-2270
Texarkana, Texas 75503
Posted: 5 September 2009
Looking for a Fireball II (Fireball 2) backglass in great condition.
Contact:
Todd Svec
Sparks, NV 89436
Posted: 5 September 2009
Looking for a good Williams Cyclone playfield populated or unpopulated new used or reproduction.
Contact:
Eric Andrews
Posted: 5 September 2009
Need backglass for Bally Capt. Fantastic commercial pinball machine
Contact:
Tim
voice: 505-469-5319
87507
Posted: 5 September 2009
Wanted: 1971 Gottlieb '2001' lower left playfield plastic (triangular).
Contact:
B.B. Kamoroff
voice: 707-459-6372
Posted: 5 September 2009
1974 Gottlieb TOPCARD
I need the following plastic play field piece?
Part # A-1505B-R
It fits the right side behind the sling shot on the right lane SPECIALS. Clear plastic piece fits underneath play-field plastic.
Contact:
Dan Yaugo
voice: 714-262-0722
24036 Troyes Lane
Murrieta, CA 92562
Posted: 4 September 2009
Looking for the following items. Can buy outright or have lots to trade:
- Need a metal backbox back door for a mid-1970's Bally pinball. Measures approx. 27-3/4 inches by 25-1/2 inches.
Backglasses Wanted:
A-Go-Go, 1966 Williams. Good to excellent condition wanted.
Blackout, 1980 Williams. Excellent or better.
Firepower, 1980 Williams. Looking for NOS original mint condition. Not interested in any of the repros that are out there.
Playfields Wanted- can buy outright or have others to trade:
1977 Bally Strikes and Spares, NOS only
1980 Williams Blackout, NOS only
Contact:
Ray
voice: 801-272-0221
Salt Lake City, UT
Posted: 4 September 2009
Wanted:
Gottlieb system 80 sound/speech board + power board for the sound board. Need these for the export version of both Black Hole and Volcano. Would prefer to trade with other pinball stuff. I have loads of Bally 2518 parts, especially MPU boards.
Contact:
Erik Famm
Posted: 4 September 2009
Looking for a Williams Space Odyssey back glass in good shape
Contact:
Bob
Ont N0b 2j0 Canada
Posted: 3 September 2009
Wanted: Good backglass for a Williams Casanova. A NOS one would be nice. 360-692-2230
Contact:
Gary Conway
Silverdale, WA
Posted: 3 September 2009
Wanted: Gottlieb King Pin 1973/74. Must be in good to excellent shape. Will pick-up or pay for shipping.
Contact:
William J Breare
voice: 201-783-8047
799 Sassafras Court
Mahwah, N.J. USA
Posted: 3 September 2009
1963 Bally Cross Country backglass -- 8.5+ or high quality reproduction OK. Entire parts machines also considered.
Contact:
Fred Bobrow
412 Main Street
Beacon, NY 12508
Posted: 2 September 2009
1976 William's Grand Prix (EM) Back Box door -- or other compatible.
Contact:
Fred Bobrow
412 Main Street
Beacon, NY 12508
Posted: 2 September 2009
WANTED: Complete wiring harness for the lower cabinet on a Bally CAN CAN. I need all the wiring for the lower cabinet, right on down to the coin door wiring. Also need the ball collecting alley way, (the wood structure that collects the balls with its wiring) I have a empty cabinet that needs the wiring.
Contact:
Gary Conway
Posted: 2 September 2009
Looking for a lockdown bar for a 1969 Gottlieb Spin Card
Contact:
T Pepper
Ont
Posted: 1 September 2009
Looking for a nice Gottlieb Genie backlglass. Need not be perfect, just nice.
Contact:
Keith
Bedford, TX
Posted: 1 September 2009
1974 Bally Boomerang Backglass needed. Mine is mint, except for the lower inch is wiped off. Seems to be a common problem with this game. Anyone have one?
Contact:
Phil
voice: 971-563-2625
Vancouver, WA 98661
Posted: 31 August 2009
Empty woodrail cabinet for my modified Gottlieb Roto Pool (1958).
Must be complete with both woodrails.
Contact:
Bruno Zappaterra
voice: 3393511036
Via Biancospino 16
Ferrara 44123 Italy
Posted: 31 August 2009
WMS Klondike upper center reel plastic needed as mine is in pieces. Also, WMS Super Star playfield wanted. Have EM parts to trade for games like WMS Dealers Choice, Bally's Capt. Fantastic, or Gottlieb's Top Score, plus more. Also mid-50's to 80's flyers, and some schematics.
Contact:
Ts Figenskau
Seattle, WA
Posted: 31 August 2009
Looking for a head for a Nitro Ground Shaker. Head only, no boards, or backglass.
Contact:
Bill Thiry
voice: 859-744-3819
1199 Mcclure Road
Winchester, KY 40391
Posted: 31 August 2009
I need a launch button for a 1997 Sega X-Files pinball. (Round yellow one with the X on)
Anyone have one available and willing to post to the UK?
Contact:
Mike Coates
Posted: 30 August 2009
1995 Bally Who Dunnit:
Looking for some some playfield plastics (dont need a whole set)
1 ramp
manual
translite
upper clear ramp plastic (the one the ball has to decide which way to fall down (upper deck with triple ramp flow down-- its one piece)
I dont need super expensive NOS parts. Simply nice ones at decent/fair prices that would only be upgrades to the ones I already have.
Contact:
Kenny
voice: 703-209-3234
Virginia 22181
Posted: 29 August 2009
Parts Wanted
I am looking for MPU board and Driver board for a Williams Jungle Lord pinball game.
Contact:
Cliff
voice: 914 714 8443, fax: 845 678 2211
4 Alexandria Rd
Morristown, New Jersey 07960
Posted: 29 August 2009
1966 Gottleib Dancing Lady Backglass: fair to good condition.
Contact:
Len Pekor
Murrysville, PA USA
Posted: 28 August 2009
Looking for safe cracker playfield parts. Email me if you have a machine you are parting out, or if you have parts.
Contact:
Scott
MA
Posted: 28 August 2009
1948 Gold Mine backglass by Marvel. Good condition or better.
Contact:
Rudy
PA
Posted: 26 August 2009
1978 Gottlieb Sinbad (or Eye of the Tiger) plastics. Need the ones behind the three sets of drop targets as mine are broken.
Contact:
Chris Hughes
voice: 5193768046
2104 4th Avenue West
Owen Sound, Ontario N4k 4y5
Posted: 26 August 2009
Gottlieb Funland backglass, must send pics of both the front and back of the glass. Will buy outright or trade for a glass from our web site.
Contact:
Ron Webb
voice: 732-349-6572
36 Seaton Road
Toms River, NJ 08755
Posted: 26 August 2009
Wanted: backglass for Gottlieb Palace Guard must be in very good condition. Ed Kelsey 860 794 7834
Contact:
Ed Kelsey
voice: 860 794 7834
294 Reed Ave
Windsor Locks, CT 06096
Posted: 26 August 2009
Wanted: Backglass or Translite for HIGH SPEED pinball machine. Shipping to Calif. Please respond if you can help with your price for both.
Contact:
Mark
Corona, CA 92882
Posted: 26 August 2009
Looking for a junk 1981 Bally Centaur or 1983 Bally Centaur II playfield. The wood can be shot, missing plastics, pops, flippers and slings. It needs to have the metal rails, the drop target banks (missing targets and coils is ok), the multiball mechanism and the magnet. I don't really need anything else outside of those main parts. It'd be nice if the arch was there. I'll even take a partial playfield if it has some of the parts on it for the right price.
Contact:
Lonnie Mihin
Posted: 25 August 2009
Need backglass for a Williams Stardust to replace one that is in pieces.
Contact:
Greg Kemnitz
Loretto, MN 55357
Posted: 25 August 2009
Wanted: Back to the Future pinball plastics. Specifically the topmost plastic that sits next to the metal ramp on the left hand side of the playfield (western motif - three castmembers on the top of the plastic).
Contact:
Jason Simon
Posted: 25 August 2009
Looking for a main playfield for Haunted House. Could possibly use upper and lower as well, but mostly need a usable or restorable main playfield.
Contact:
Phil
Eht, NJ 08234
Posted: 24 August 2009
1966 Bally Safari backglass. Does not have to be mint, but would prefer one in nice shape.
Contact:
Phil
Eht, NJ 08234
Posted: 23 August 2009
1989 Williams Shuffle Inn marquee (plexiglass that is on the front of the hood over the bowling pins)
Contact:
Dave
Posted: 23 August 2009
I am looking for a Stern Stingray backglass in as mint condition as possible. I am also looking for a Stingray playfield, again, as mint as possible.
Contact:
Greg
voice: 478-397-7406
Georgia
Posted: 22 August 2009
Need Time Expander Mini playfield cover for a Dr. Who restoration. Doesn't have to be new. Just better than what I have. Assembly Part number is A-15582 but I will certainly consider just the plastic alone since I'm sure I can remove the decal and lighting from my current cover. Please let me know what you have available.
Contact:
Andrew Martin
Pflugerville, Texas
Posted: 22 August 2009
Original steel (not repro) wedgehead back door (copper colored) in near mint condition, for my King of Diamonds.
I don't need lock or key. (818) 521-5000 is my cell phone but you can call me at home (818) 758-1919. Or you can email me as:
lawcal (at) roadrunner (dot) com
Contact:
Bob Rentzer
voice: 818 521-5000
5011 Casa Drive
Tarzana, CA 91356
Posted: 22 August 2009
Wanted, NOS backglass for a Bally MISS AMERICA 1957. Or a very good condition original.
Contact:
Gary Conway
Posted: 22 August 2009
Superman Side Rails and Lock Down Bar wanted.
Contact:
Troy Norr
Posted: 21 August 2009
1999 Williams Star Wars Episode 1 Neon light saber. I need the neon part. I inadvertantly broke mine while lifting playfield. D'oh!
If you have one available, please contact me. I have some Pinball 2000 items that I could trade as well.
Contact:
Chris
voice: 267-471-5612
203 Reservoir Road
Quakertown, PA 18951
Posted: 20 August 2009
Looking for a NOS backglass for a Bally Miss America 1957. Prefer original bally glass and a nos one if possible.
Contact:
Gary Conway
voice: 360-692-2230
Silverdale, WA
Posted: 20 August 2009
Looking for a good backglass (8.5 or better) for Williams 3 Jokers. If I cannot find a 3 Jokers glass, I would consider purchasing a good Williams Straight Flush glass. Pleae email if you have either available.
Contact:
Dave Metrando
voice: 845-691-6205
Highland, NY 12528
Posted: 19 August 2009
Wanted Power Transformer for Bally/Williams Pinball Machine. Part number is 5610-13953-00 Rev. 1. Transformer is for a Dirty Harry Pin.
Contact:
Gary Wilson
Swartz Creek, Michigan 48473
Posted: 19 August 2009
Bowling Queen Backglass wanted. Repro or nice original.
Contact:
Blaine Yarber
voice: 276-608-0888
15433 Briarwood Lane
Abingdon, VA. 24210
Posted: 18 August 2009
Looking for Dungeons and Dragons topper.
Contact:
Dave Timmer
voice: 616 292 7551
Grand Rapids, MI
Posted: 18 August 2009
Looking for 1979 Bally Star Trek electromech schematics.
Contact:
Kevin Olson
3568 Taos Lane
Las Vegas, Nevada 89121
Posted: 17 August 2009
Looking for a coin chute/switch for a 1953 Silver Skates Williams pinball. From what I can tell, they were also used on Gottliebs. I've seen one on a 1956 Gottlieb, manufactured by Heath co. But need another one.I have a picture of what I need from an old billboard. I have the wooden door and the metal coin return stopper. I just need the chute / switch / wires etc on the inside.
Contact:
G.t. Bishop
VA
Posted: 17 August 2009
1965 Chicago Coin 'Hula Hula' backglass good to fair condition. I also would like to get any other parts that might be available I.E. the dancing Hula Girl.
1967 Gottlieb 'Sea-Side' backglass. This game was made for the Italian market. It was the European version of 'Surf-Side' I would like to get the backglass if not the entire machine. The condition is not important. I also would like to get a working, DOES NOT HAVE TO BE PERFECT 'Surf-Side' as well.
Contact:
Ian Worrell
voice: (732) 2881030
1579 Deer Hollow Dr.
Toms River, N.J. 08753
Posted: 15 August 2009
1978 Playmatic Space Gambler MPU board, working condition.
Contact:
Justin
voice: 775-783-9321
Posted: 15 August 2009
CFTBL plastic part no 31-1698-5-sp it is the small greyish plastic just above right flipper sling shot. Condition as long as it's not cracked or broken.
Contact:
Peter
Melbourne Australia
Posted: 15 August 2009
Looking for a nice glass for a 1970 Williams Ringer.
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 15 August 2009
I am looking for a replacment backglass for a 1969 Bally Hoo pinball machine. I can pick up at Pinball Expo 2009 in October, or the York Show in October if you have one and are coming to one of those shows.
Contact:
Kory Hankin
Rockville, MD
Posted: 13 August 2009
Nine Ball (Stern 1980) backglass in good to perfect condition
Please reply with price and pictures.
Contact:
Kelly
Plano, TX 75023
Posted: 12 August 2009
Transformer for a Data East Royal Rumble pinball
part # 010-5003-00
Contact:
Gabriel Dannunzio
Posted: 12 August 2009
Looking for a NOS or real good used Gottlieb Freddy: A Nightmare On Elm Street playfield. Scammers don't bother emailing.
Contact:
Homer Stevens
voice: 989-689-5159
MI. 48628
Posted: 10 August 2009
Wanted - Ramp for Williams Comet
Contact:
Kris Cornolo
voice: 612 816-3535
12651 Dupont Ave. So
Burnsville, MN United States
Posted: 10 August 2009
1982 Bally Mr & Mrs Pac-Man Playfield plastics
I need two of the playfield plastics for this machine, unmarked and not damaged. One is the top left arch plastic bearing the words 'Pac-Man Saucer' and the other is the long plastic that goes from above the left mid drop target bank around the bumper and up to and around the top left drop target bank. Has the words 'All targets down....'
UK buyer can pay with Paypal, or possibly collect from PPE in October.
Contact:
John Whyatt
Posted: 8 August 2009
Gottlieb Atlantis pinball instruction manual and playfield plastic part. Copies, repro.
Contact:
Mario
Posted: 8 August 2009
Looking for a single player 1973 Bally Delta Queen backglass for a EM pinball machine. I will pay to have it shipped or I will pick it up at the Niagara falls pinball show In August or the York pinball show or Allentown show in the spring send me pics and info or call 585-747-0605 ask for Mickey or email at coinopny@gmail.com
Contact:
Mickey Treat
Rochester NY
Posted: 8 August 2009
1991 Williams The Machine: Bride of Pinbot Playfield -- NOS or Repro. I'm looking for a Bride of Pinbot playfield. I would prefer a NOS playfield, but if it's a very clean playfield I may consider it as well. A repro is fine, as long as it's accurate.
Contact:
Jeff
577 Jim Bridger Dr
Centerville, UT 84014
Posted: 7 August 2009
Looking for a nice playfield for a 1975 Gottlieb Fast Draw or Quick Draw. Doesn't have to be perfect, just decent condition. Prefer populated, at least underneath, but will consider anything. Price depends on condition and shipping costs.
Contact:
Dale
Aldergrove, BC Canada
Posted: 7 August 2009
This is a real longshot, but I'm looking for a control panel overlay for a Data East Slapshot. This is a somewhat rare hockey pitch and bat style game from I believe the early 90s. Please contact me with any leads you may have.
Contact:
Dale
Aldergrove, BC Canada
Posted: 7 August 2009
I need a bumper body and cap for a Chicago Coin Punchy made in 1950. It is a hollow body with an oval cut into it that slips over a switch and a lamp that are protected by a rubber ring. When the ball hits the rubber, it closes the switch and scores points and turns the lamp off. The body is 1 7/8" high, 1 1/16" diameter at the base and 1 9/16" diameter at the top. The cap is 1 13/16" in diameter. (All diameter measurements are outside-to-outside.) Several other games used this same bumper. If you have one or know where I might get one, please contact me.
Contact:
Tom Reedy
1520 Angelina Bend Dr
Denton, Texas 76205
Posted: 7 August 2009
1962 Williams King Pin instruction card. Scan would be fine.
Contact:
Don Newswanger
Lititz, PA.
Posted: 5 August 2009
Barbwire. Looking for x-rated translite.
Contact:
Steve
Posted: 3 August 2009
Looking for plastics and ramp cover for Bally Heavy Metal Meltdown and left flipper plastic.
Contact:
Jim Wisniewski
voice: 814 774 4303
9138 Heather Lane
Girard, PA 16417
Posted: 3 August 2009
Need Black Knight Back Glass - must be mint.
Contact:
Bill K
Posted: 3 August 2009
WANTED: 1995 Sega Mary Shelleys Frankenstein Parts. Items required are:
Frankenstein Monster Unit (Part #500-5887-00)
Upper Level Plastic Ramp (Part #555-5565-00) or Ramp Set
Dot Matrix Display 192x64 (Must be working)
All parts must be in good to excellent condition.
Contact:
Craig
Alicia Gardens
Ballajura, WA 6066 Australia
Posted: 3 August 2009
1972 Williams Spanish Eyes backglass. Does not need to be mint, just presentable.
Contact:
Mike
Carmichael, CA
Posted: 2 August 2009
1973 Gottlieb Hot Shot Backglass wanted. Let me know price, condition, etc. Pictures would be wonderful. Also looking for a back door to the back box.
Contact:
Doug
Coon Rapids, MN
Posted: 2 August 2009
Gottlieb Happy Clown, Criss Cross and World Fair - after excellent instruction cards.
Contact:
Tony Mather
Posted: 2 August 2009
I'm looking for a sound board for my Guns n Roses machine.
Contact:
Rob
voice: 949 433-3666
Posted: 2 August 2009
Looking for a 1982 Gottlieb Spirit Pinball machine in good condition. Does not have to work or be 100% complete. Please email if you have one for sale.
Contact:
Scott
Posted: 2 August 2009
Hi, Looking for a Williams Firepower (1980) in NY, PA, or NE Tri-state area. Doesn't have to be complete but with a decent playfield. Please email if you have one for sale.
Contact:
Scott
Posted: 2 August 2009
1976 Gottlieb coin door - must be mint. This is the door with the large plastic start button (not small red metal button), also this door does not have the globe in the center.
Contact:
Wes Dolen
voice: 239-643-1100
Naples, FL. 34116
Posted: 1 August 2009
Looling for a good used 192/64 dot matrix display for a baywatch machine.
Contact:
Allen Wiler
voice: 9372542590
Posted: 1 August 2009
Phantom Of The Opera, need magic mirror spinner and plastic that goes above it. Also interested in any other parts you may have for the game.
Contact:
Joe
CA
Posted: 31 July 2009
1979 Bally Ground Shaker Backglass
Contact:
Caroline Quetot
Howe, In 46746
Posted: 30 July 2009
1981 Gottlieb Mars God of war. Looking for left outlane plastic, center drop target plastic and inner backglass.
Contact:
Bill Briese
voice: 330-220-2210
260 Valley Brook Blvd
Hinckley, OH 44233
Posted: 29 July 2009
I am looking for the sign that goes over the Hercules pinball.
"HERCULES" Worlds Largest Pinball!
Contact:
Bj Cunningham
voice: 573-424-7200
12650 East Durk Rd.
Centralia, MO. 65240
Posted: 29 July 2009
1957 Gottlieb World Champ playfield.
Contact:
Jim Fredrickson
voice: 218-591-3971
Minnesota
Posted: 28 July 2009
Williams/Star Wars Episode One:
Power unit goes inside handle of green sabre, required to increase 12 volt to 110 volt to power up neon light (green sabre).
Contact:
Cr Tyson
Seattle, WA
Posted: 28 July 2009
1953 Gottlieb Poker Face - Backglass Wanted
Need this to complete my current restoration project. Will consider any condition, please let me know what you have.
Contact:
Allen Brown
Posted: 27 July 2009
Need a backglass for my:
Sorceror (1986 Williams)
Big Game (1980 Stern).
Contact:
Kris
voice: 612 816-3535
Burnsville, MN United States
Posted: 27 July 2009
1999 Bally Revenge From Mars Translite Needed
Contact:
Jb
voice: 503-380-6549
Posted: 25 July 2009
Looking for Williams Time Warp backglass in Ontario
Doesn't have to be perfect just better that what I already got which is pretty bad.
Contact:
Adam
Hamilton, On Canada
Posted: 25 July 2009
Need Plastic set for 1984 El dorado City of Gold. Primarily need the plastics over both target banks. This is El Dorado City of Gold, the solid state game, not the Eldorado EM.
Need Excellent backglass for 1980 Stern ALI.
Contact:
Dan
NC
Posted: 25 July 2009
Chicago Coin Mustang backglass.
Contact:
Jp Jackson
11420 Carousel Drive
Grand Ledge, MI 48837
Posted: 24 July 2009
Doctor Who Mini Playfield.
Contact:
Michael Schrader
4357 Skyline Dr
Blaine, WA 98230
Posted: 24 July 2009
Gottlieb Lightning Ball, Need the Rotation Disk in the head that spells out 'Lightning Ball'. Will purchase entire head from parts game if needed.
Contact:
Nick Raschilla
voice: 215-258-3644
2195 Sterners Rd.
Green Lane, PA 18054
Posted: 23 July 2009
1978 Foxy Lady (by Game Plan) parts required.
I require the following:
Plastics Set
Bumper Caps
Rollunder Spinners
Roulette Wheel (from Under playfield)
Apron
Displays
All must be in good re-usable condition
If anyone has any of these items please let me know.
Contact:
Craig
.
Perth, Western Australia Australia
Posted: 22 July 2009
I am looking for a non working 1966 Bally Capersville machine for parts only.
Contact:
Mick Brown
89 Sutton
Ringgold, GA. 30736
Posted: 22 July 2009
Captain Fantastic 1975 Bally (Parts): coin door, playfield apron
Contact:
Larry Bohl
voice: (308) 236-1379
220 E.52nd. St.
Kearney, NE 68847
Posted: 21 July 2009
Looking for a NOS or excellent seconds plastic set for a Devils Dare.
Really need the centre large plastic to sits over the centre drop target bank to get by. Any help would be appreciated.
Contact:
Marco
Posted: 21 July 2009
Looking for the head of Rudy from Fun House.
Whole or in parts. I am using this for decorative purposes so it doesn't have to be in the best shape.
Contact:
Jamie Ray Macsisak
Aloha, Oregon
Posted: 21 July 2009
Auto Race Gottlieb 9/56 - looking for back glass - will buy glass, head or whole machine - need for restoration.
Contact:
Jim Southwell
voice: 864 593 8321
Mauldin, SC 29662
Posted: 20 July 2009
Gold Star gottlieb 8/54 - looking for back glass - will buy glass, head or whole machine - need for restoration.
Contact:
Jim Southwell
voice: 864 593 8321
Mauldin, SC 29662
Posted: 20 July 2009
Looking for a STRANGE SCIENCE playfield. Populated or not. The only thing I really need off the top of the PF is the first ramp when you launch the ball for the skill shot.
Also Need a LASER BALL playfield with little wear. Perfer populated, because I need many of the plastics.
Contact:
Ron Kruzman
voice: PRIVATE:269-599-2276
Posted: 20 July 2009
Williams Deluxe Official Baseball set of cast players on field. Will take either reproduction or used.
Contact:
Kent
voice: 818-504-0440
535 4th St
San Fernando, CA 91340
Posted: 20 July 2009
Looking for a backglass for a 1956 Gottlieb Gladiator.
Contact:
Darryl Anderson
Minneapolis, MN
Posted: 19 July 2009
1962 Gottlieb Cover Girl: Seeking to buy a very good set of score/instruction cards, or a scanned copy of your own. Idont mind paying a reasonable charge for your time. This is the last item required to complete the restoration of this machine.
Contact:
Doug
Kent, England
Posted: 18 July 2009
1994 Data East Guns N Roses NOS playfield
I am after a NOS playfield for a Data East Guns N Roses.
Contact:
Angelo Di Donato
Posted: 18 July 2009
LF 1976 Gottlieb VOLLEY plastics, especially the center one (drop target) part #A-16370
Contact:
Steph
Posted: 17 July 2009
Wanted for 1965 Gottlieb's 'Bank A Ball'. The 15 plastic poolballs (and attaching arm/s) which appear in the backglass of this machine, when you hit the corresponding target/s on the playfield.
Also, a good backglass for this machine.
Also, I'm still searching for the playfield plastics for Gottlieb's 'Sky Jump'
Contact:
Mark Jackson
voice: 0243281016, fax: 0243281016
25 Calantha Drive
Wyoming, Nsw 2250
Posted: 17 July 2009
I need a backglass for a Gottlieb Sheriff. Shoot me an email if you have one available.
Contact:
Jim Shine
Greenwood, IN 46142
Posted: 16 July 2009
1979 Bally Star Trek Backglass - decent shape
Want to buy a Bally Star Trek Backglass in decent shape. Mine is bubbled beyond repair.
Contact:
Kevin
Port Orchard, WA
Posted: 15 July 2009
i need all parts for a brunswick -aspen pinball
Contact:
Victor Salome
voice: 614-622-1515
879 East 5th Ave.
Columbus, Ohio 43201
Posted: 15 July 2009
Looking for a supplier of new playfields for Haunted House.
Contact:
John
NC 27317
Posted: 15 July 2009
Looking for one Centaur plastic, the small one to the left of the left side flipper, must be good condition.
Also, looking for an original Centaur game manual, 1981 Bally parts catalog & lastly, a high res custom free play card for the game if anyone made one.
Contact:
Vince
Twin Cities, MN
Posted: 15 July 2009
Need Bally speaker panel. 1995 thru 1999. The plain black with Bally logo. (ex. AFM, Scared Stiff, NBA, Champion Pub) US REPLIES ONLY. NO FOREIGN REPLIES.
Contact:
Ron Douglas
voice: 636-798-2215
Defiance, MO 63341
Posted: 15 July 2009
Williams suspense: I need the plastic inside the captive ball spinner, it is the plastic with the bonus score amounts on it.
Contact:
Robert Feltch
Posted: 15 July 2009
1986 Williams Pinbot/Jackbot - Ramp lifting assembly, under playfield parts. ie. Coils and brackets. Part Number: B-11304
1986 Williams Pinbot - Flasher Resistor board that resides on the back of the backbox door. I will take it with or without resistors.
Please let me know.
Contact:
Scott
Buffalo Grove, IL 60089
Posted: 14 July 2009
Looking for OXO playfield plastics. Please email photos and price if you have them for sale.
Contact:
OXO
Upland, California
Posted: 13 July 2009
1952 Williams Domino backglass wanted.
Contact:
Tony Mather
Posted: 12 July 2009
Torpedo Alley: Looking for a translite for Data East Torpedo Alley. I also need the small picture that goes behind the backglass.
Contact:
Mike
voice: 530-624-3902
California
Posted: 11 July 2009
Wanted: Bally USA backglass. Prefer a 7/10 or better. Let me know what you have.
Contact:
Michael Hanley
voice: L5N 4M5, fax: `
Mississauga, Ont Canada
Posted: 10 July 2009
Looking for stencil set for cabinet artwork for 1971 Gottlieb Play Ball baseball game. If you can help, please contact me.
Contact:
Mark Hartman
voice: 314-707-0184
9 Silver Lm
St Louis, MO 63122
Posted: 9 July 2009
Looking for a good playfield for 1978 Star Trek or someone who can do a resto on the one I have.
Contact:
Frank
Posted: 9 July 2009
Looking for the following items -
Backglasses in at least VG condition -
1957 Gottlieb Straight Flush
1960 Gottlieb Texan (looking for a plastic version)
1962 Williams Valiant
1962 Williams Coquette
1962 Williams Tradewinds
1965 Williams Lucky Strike
1969 Gottlieb Skipper
1969 Gottlieb Four Seasons
Seeking playfield plastics for the following machines -
1957 Gotttlieb Straight Flush - also looking for the cover above the bulbs on the rotor target unit.
1958 Gottlieb Sunshine
1959 Gottlieb Atlas
1963 Keeney Poker Face
1966 Gottlieb Central Park
Also looking for -
S/I cards for Gottlieb 1958 Criss Cross (copies are O.K.)
Late 50s/early 60s Williams lock down bars.
Contact:
Joseph Fela
voice: (908) 755-3852
150 Robert Place
So. Plainfield, N.J. 07080
Posted: 9 July 2009
1988 Williams Taxi Arrival Ramp
Contact:
Joe
Posted: 8 July 2009
I need a play field for Lost World made by Bally. NOS or good 9+ condition
Contact:
Vic Stewart
2508 Hearst Ave
Oakland, California USA
Posted: 6 July 2009
1981 Bally Embryon NOS playfield. Please let me know if you have a NOS one for sale. Will pay well according to condition (e.g. higher price if not warped, planked, etc.)
Contact:
Jim Heck
Chelmsford, MA 01824
Posted: 5 July 2009
1981 Williams Jungle Lord Backglass in nice condition
-1969 Bally Bowl-o Backglass in nice condition
Contact:
Blaine Jenkins
voice: 540-722-4203
440 Rocky Ford Road
Clearbrook, VA USA
Posted: 5 July 2009
Harbor Lites backglass needed! Spelled it wrong last time. Hope someone out there has a second one to help me out with. Destroyed mine accidently!
Contact:
Robert
Posted: 5 July 2009
Stern Hot Hand
I need a complete power supply for this game. I'm not looking to do any soldering. I was hoping to get a working one, that I can just plug in.
Contact:
Phil
voice: 971-563-2625
Vancouver, WA 98661
Posted: 5 July 2009
I'm looking for two 7 digit displays for SORCERER by Williams
Contact:
Mark
voice: 248 380 0228
Michigan 48167
Posted: 5 July 2009
Wanted: Prototype translite for Data East Tommy. I have parts to trade or cash. Please email any leads.
Contact:
Mike
PA
Posted: 4 July 2009
1952 Williams 4 Corners, 2 playboard inserts, 2 inches round.
#1 All rollover channels 500,000 when lit.
#2 special when lit.
Looking for inserts in fairly decent condition, OK if somewhat beveled.
Contact:
Rick
voice: 609-392-7699
Lawrenceville, NJ
Posted: 3 July 2009
Blackbelt, Tradewinds, or Karate Fight backglass; Solar City or Target Alpha (5 targets) Playfield plastic; any Williams Tradewinds Parts.
Contact:
Chuck Shade
So. Wmspt., PA 17702
Posted: 3 July 2009
Wanted: Cyclone ramp (not the Comet ramp) for 1988 Williams Cyclone. If you have any other Cyclone parts, would be interested. Replies from the USA only!
Contact:
Gary
Elmwood Park, NJ
Posted: 3 July 2009
I am looking for a Comet main ramp. I acquired a machine in horrible shape and got it all back to working shape. But the machine had some major heat damage, and the main plastic ramp is warped. If anyone has an old ramp I would be interested in it. I need it for basic shape as the ramp I have is 100% but out of shape. Let me know.
Contact:
Joe
Gilbert, AZ 85297
Posted: 1 July 2009
Judge Dredd Plastics: I am looking for:
-Crane Cover
-The 'Meltdown' Plastic which covers those 3 permanently locked balls on the playfield
-Eagle Topper and/or Topper Bracket
Nos or Used is OK as long as no cracks or chips.
Contact:
Charles
Los Angeles, CA
Posted: 1 July 2009
Looking to buy a backglass for a 1969 Sega Missile backglass. Can supply US shipping address if this helps.
Contact:
Derek
Posted: 1 July 2009
Williams Crusader:
Need: Award/Score cards and manual (I have a schematic)
Need: Name S/U unit.
Contact:
Ira Wexler
Owings Mills, MD United States
Posted: 1 July 2009
Would like to buy 2 pop bumper targets for Fathom. Also the cave trap plastic and the top left and bottom left plastics that are right next to the wood.
Contact:
Steve
Windsor, Ontario Canada
Posted: 1 July 2009
Backglass for a Williams Ten Spot, must be able to send photos of both the front and back of the glass.
Contact:
Ron Webb
voice: 732-349-6572
36 Seaton Road
Toms River, NJ 08755
Posted: 30 June 2009
Harbor lights backglass needed.
Contact:
Robert
Posted: 30 June 2009
Judge Dredd Plastics Wanted
NOS or Used is ok just as long as there are no cracks or chips.
I'm looking for JD:
-Crane Cover
-Eagle Topper
-The 'Meltdown' Plastic which covers those 3 permanently locked balls on the playfield
-Slingshot plastics (NOS or used originals) would prefer them not to be repros unless repro color and detail is EXACTLY like originals.
Contact:
Charles4400
Los Angeles, CA
Posted: 30 June 2009
Looking for a really nice condition Quicksilver playfield, populated prefered but stripped ok.
Contact:
Mike Keith
Malibu, CA 90265
Posted: 30 June 2009
Wanted MPU test card for Bally TE-635-2 MPU tester. This card connects to the top connector of the -35 mpu & the tester.Any information, schematic or pics would help. I could copy the test card if I had one.
Contact:
Dave
Mission, Bc Canada
Posted: 30 June 2009
Looking for a signed 'Pat Lawlor' Twilight Zone apron. Ask for John or Craig.
Contact:
John Clements
voice: 919-859-2321
Posted: 28 June 2009
1965 Gottlieb Buckaroo apron wanted.
Looking for a good looking apron for a Buckaroo machine. Does not need to be NOS, of course.
Contact:
Rick
Posted: 27 June 2009
Looking for a schematic for a Chicago Coin Pistol Arcade game. If anyone has one or knows where one can be found I would greatly appreciate contacting me.
Contact:
Bert Oppenheim
voice: 508 320-9725
Medway, MA 02053
Posted: 27 June 2009
Wanted Fort Lock double bitted keys. Can be blank or used cut keys any and all key numbers. I don't need the locks. If you have old Fort Lock keys laying around I could use them.
Contact:
Rick Pittman
Posted: 27 June 2009
WTB: 1957 Williams DeLuxe Official Baseball need base runners and cardboard spectators. Is anyone reproducing these parts?
Contact:
Mark Hartman
9 Silver Lm
St Louis, MO 63122
Posted: 27 June 2009
1967 Bally Rocket III (pinball machine) backglass
Contact:
Timothy Benko
Po Box 216
South Plainfield, NJ 07080
Posted: 26 June 2009
1991 Williams Terminator 2 Playfield
Still looking for a replacement playfield for the above game in my collection. Something NOS or gently used that would require minor touch-ups and clearcoat. Appreciate any leads or help, I really want to make this game special for my son.
Contact:
Jim Crismale
Posted: 26 June 2009
Looking for parts for 1993 Indiana Jones pinball
- biplane assembly including brackets and light boards
- fighter plane
- plastic set
Also looking for spare parts for some of my other machines
CFTBL, Getaway, Flintstones, Starship, Judge Dredd, Roadshow, STTNG, Hook, Checkpoint, F-14, TZ, you can email me with any parts you may have or call me.
Contact:
David
voice: 519-809-0650
Posted: 25 June 2009
Gottlieb '76 Royal Flush playfield, worn playfield OK.
Just looking for something reasonably flat and straight without water damage. Paint wear is OK, need not have parts on top or bottom either.
Contact:
Jody Lobert
voice: 724-494-4530
Gibsonia, PA 15044
Posted: 24 June 2009
In need of the head locking mechanism for a Big Game pinball by Stern. It's the bar that goes across the inside top of head with associated hardware.
Contact:
John Clements
voice: 919-859-2321 or 919-255-0789
Raleigh, NC 27606
Posted: 24 June 2009
I am looking for an unbroken ramp from a Space Shuttle.
Also looking for a set of glowing bones for Scared Stiff.
Contact:
Hugh McCreight
Posted: 23 June 2009
Sega EM Manuals
Looking for the following SEGA EM manuals. Would also be interested in any other paperwork (invoices, service bulletins, flyers, etc.) for the SEGA EM games (1966-1976)
Sega Dodgem Crazy manual
Sega Derby Day manual
Sega Five StarQ manual
Sega Jumbo manual
Sega Invaders manual
Sega Jockey Club manual
Sega Ascot manual
Any other other Sega EM service bulletins, old invoices, etc
Contact:
Derek
Posted: 23 June 2009
TAXI SPINOUT RAMP. New preferred, but used and in good shape OK too. Will even consider with some cracks or breaks. (Mine is very bad. need something better). Send pic or description and price.
Contact:
Bruce
Posted: 22 June 2009
Looking for a playfield for a Bally Eight Ball Deluxe. Any condition.
Contact:
Steve
Florida
Posted: 21 June 2009
I'm after a Williams 1979 Flash playfield only. Looking for just the playfield but if the field has the mechanics on it I will take it as is. Looking for a playfield which is a 7 out of 10 or higher. I am in the restoration bussiness and need a quick respone time on this part. Please call me ASAP and ask for Clayton.
Contact:
Clayton Thibert
voice: 519-981-3488
3645 St Patrick's Dr
Windsor, Ontario N9E 3H6 Canada
Posted: 20 June 2009
Looking for Demolition Man plastics set. Complete or partial.
Contact:
Alan
Posted: 20 June 2009
I am looking to purchase a 1960 Gottlieb Flipper playfield. A playfield in any condition is worth discussing, but the better the condition, the more I am willing to pay.
Contact:
Mark Niemkiewicz
Allentown, PA
Posted: 19 June 2009
Bally Paragon pinball machine 1979 NEED MPU board light corrosion repairman \OR new board
Contact:
Marion Sampson
115 Lake St
Auburn, Me 04210
Posted: 18 June 2009
Looking for an NOS or excellent condition "Marilyn" translite for my Taxi.
Contact:
Mike
Posted: 18 June 2009
Need center plastic B-16411 and kicker a-16414-L for Lucky Hand-Jacks open.
Kicker Plastics also for Vagabond.
Contact:
Al Johnson
WI.
Posted: 18 June 2009
Looking for an Eight Ball Champ playfield plastic set in decent condition (still actually, these seem difficult to come by)
Have a Williams Space Shuttle playfield in so so condition I'm parting out for trade? Let me know if youd be interested in something like this. Has all coils, wiring and apron, some plastics missing but the ones here are in relatively ok state. Ramps are good. Shuttle is there but it has some stickerdamage and looks like it spent most of its life in a nicotine heavy environment. If that doesn't work for you, please quote me a price for the plastics.
Contact:
Jorgen
625 Joann
Somerville, TN 38068
Posted: 17 June 2009
Stern Dracula, looking for a playfield in nice condition, and may be interested in other parts as well.
Contact:
James
Portland, Ont. Canada
Posted: 16 June 2009
Looking for a really nice Bally Cybernaut complete, working or not working ok, Or just a really nice playfield.
Contact:
Chuck Sanderson
voice: 314-280-9299
IL
Posted: 15 June 2009
Need a rebound board for a Williams Alpha puck bowler.
Contact:
Bob Graham
Columbia, TN 38401
Posted: 14 June 2009
I need a playfield plastic set for a 1972 Gottlieb JUNGLE. I need the complete set, but will take individual pieces.
Contact:
Larry Graese
voice: 7274187468
11610 Murray Ave
Largo, FL 33778
Posted: 13 June 2009
Looking for:
Williams, playfield apron for Tales of The Arabian Nights
Williams TERMINATOR 2 plastic set, full or partial
Contact:
Jan
voice: 207-432-1482
Posted: 13 June 2009
Desperately need 2 Merkle Korff Flexo-Action motors (they have the round gearcase). They are from the 1930-50s. Both are 25 volt and one is 4.6 rpm and the other is 20 rpm. I'll pay at least $100 each for these, so please check and se if you can help me.
Contact:
Jim Anderson
Posted: 13 June 2009
1964 Williams Heat Wave backglass looking for one of the reproductions
Contact:
Pete Cooley
Huntington Beach, CA
Posted: 12 June 2009
Game Plan cocktail pin Fan-Blower unit or any other Fan-Blower unit that will work in my Game Plan Star Trip. Also looking for a Game Plan chime unit. Let me know what you got.
Contact:
Eric Jaeger
voice: (808) 987-5247
25011 Frampton Ave. #6
Harbor City, CA 90710
Posted: 12 June 2009
Looking for a NOS or a used Stargate Playfield in excellent or better condition.
Contact:
Mark Pegram
voice: 513-759-0396
5892 Franklin Trail
Hamilton, Ohio 45011
Posted: 12 June 2009
1990 Bally Game Show Looking for an NOS or good used Bally Game Show playfield. Would also be interested in NOS plastics. Email with what you have and an asking price.
Contact:
Tim Maleck
Austin, TX
Posted: 11 June 2009
Looking for parts for my Midway Dog Fight. Sound Board Gun parts Art work.
Contact:
Dan Moore
Hunter
Ottawa, Ontario
Posted: 11 June 2009
Want to buy a nice used or NOS Apron for my whirlwind
Contact:
Jon
Posted: 11 June 2009
1993, Jurassic Park. Looking for a light box topper.
Contact:
Steve
Jacksonville, FL 32259
Posted: 10 June 2009
Looking for a plastic set for 1977 Gottlieb Solar City plastic set in good or mint condition.
Contact:
Vinny
Ohio
Posted: 9 June 2009
Parts Needed for 1995 Bally Who Dunnit Pin. Any condition considered! Parts as follows:
Who Dunnit Pinball slot machine assembly
Security chip for Bally Who Dunnit
Dot Matrix Controller Board = A-14039.1
WPC Security CPU Board = A-17651-50044
Fliptronic II Board = A-15472
Power Driver Board = A-12697-4
Tony’s Palace Plastic
Who Dunnit Translite
Ideally would like to source from NZ or Australia or possibly US, depending on shipping!
Contact:
Duncan
voice: 006421443862
Christchurch New Zealand
Posted: 9 June 2009
Wanted: Gottlieb Miss Annabelle (1959) parts, playfield & backglass animation plastics, coin door with working coin accepter mechanism.
Contact:
Pinballphreak
Posted: 9 June 2009
1985/86 Bally Motordome Sound Board
Contact:
Gary Kiehl
voice: 559 441-1111
1231 N Blackstone
Fresno, CA 93703
Posted: 8 June 2009
Looking for ONE plastic from TOTAN (Tales of the Arabian Nights).
It is large the one that sits above the lock switches, behind the lamp. I 'think' it may be known as the Harem plastic ( unsure). It is purple at the bottom, has the lady in the middle and is yellow on its upper left.
Contact:
Mark Watson
Australia
Posted: 8 June 2009
WANTED: 1988 Williams Taxi Spinout Ramp, Part R-12262. New or used in good condition (ramp with cracks or breaks will also be considered). Send picture, if possible, and price.
Contact:
Larry
Posted: 8 June 2009
After a Indiana Jones playfield with minimal wear, can organize pickup from any State in the USA, missing coils, plastics etc is okay.
Email me with a price.
Contact:
Michael Shalhoub
Sydney Australia
Posted: 3 June 2009
Complete 10,000 point relay unit for a Gottlieb Sunshine 1958.
Have just rebuilt the entire game and the complete unit has been hacked out.
Contact:
Tony Mather
Posted: 3 June 2009
Looking for:
Spook House Ramp for Williams Cyclone
Gun Handle for Williams Terminatot 2
Tombstome Assy for Data East TFTC
Please shoot me a mail if you have any of the above parts for sale.
Contact:
Hagen
Posted: 3 June 2009
1959 Williams Pinch Hitter: Looking for a coil which may have been used on several different machines. The number is M34-3100. It says it's a lock relay. any other parts for this machine considered as well.
Contact:
Mike
Austin, Texas 78745
Posted: 2 June 2009
Wanted:
Plastic set for Gottlieb Sky Jump.
Plastic set for Gottlieb 2001.
Individuals or complete. Must be unbroken.
Contact:
Jason Rufer
Cokato, MN 55321
Posted: 1 June 2009
Wanted Evel Knievel pinball head unit without back glass. Or just the power-supply, number displays and all circuit boards. I live in Tampa Florida and my contact number is 813-240-6590.
Contact:
David Collins
11209 Donneymoor
Riverview, Fla 33569
Posted: 1 June 2009
Looking for any/all parts for Who Dunnit. Any help is appreciated.
Contact:
Duncan Booth
Christchurch New Zealand
Posted: 30 May 2009
Hi all, I am located in Melbourne, Australia and am looking for any Bally solid state pinball machines or parts you have for sale. I have almost finished a Bally Rolling Stones and am looking for a new project to start, any machine and in any condition will be considered, will pay a fair price.
Contact:
Tony Tanti
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
Looking for a replacement playfield for my 1979 Bally Harlem Globetrotters, must be of clean condition with no or little ware, will pay for all costs including shipping and handling fees.
Contact:
Tony
High Street
Melbourne, Victoria 3076
Posted: 29 May 2009
I am looking for playfield plastic for my Flying Carpet pinball machine. Please email me your selling price if you have the plastic of A-13579 & A-13582.
Contact:
Eddy
1427 Marigold
Upland, CA 91784
Posted: 29 May 2009
Looking for Silverball Mania parts (plastics and playfield), Super Sonic Parts (playfield). Williams Bad Cats playfield and wishbone ramp, Mr and Mrs Pacman Bumper Caps. Let me know what you have available for these machines.
Contact:
Steve Orringer
voice: (919)965-8370
487 Herring Road
Princeton, NC 27569
Posted: 25 May 2009
Would like to purchase a Williams Firepower / Fire Power back glass/ backglass.
If you have one in 'great shape' (a nick or two is O.K.). please contact Tom at 404-966-2051 to discuss pricing and terms for shipping to Marietta, GA (Atlanta), zip 30067.
Contact:
Tom Grizzard
voice: 404-966-2051
470 Timberlea Lake Dr SE
Marietta, GA 30067
Posted: 25 May 2009
I am looking for an unbroken left slingshot plastic for a Gottlieb Raven. I would also buy a good used set pf playfield plastics or a new old stock set of plastics for it.
I am looking for a nice playfield apron (yellow) for a Gottlieb Totem.
Contact:
Richard Strunks
Fort Smith, Arkansas
Posted: 24 May 2009
WANTED: I am looking for a United Hawaii bingo backglass.
Contact:
Alan
Posted: 24 May 2009
1994 Freddy: A Nightmare on Elm St. I need the plastic boiler that's in the upper right side of the playfield. Could also use a hand / claw due to broken blades.
Contact:
Mark
MI 49417
Posted: 23 May 2009
1988 Data East 'Time Machine'
Looking for:
Starwarp ramp assembly
slingshot plastics
lane guide plastics.
Contact:
Elliott Segelbaum
Posted: 22 May 2009
Looking for 2 Bally 6 digit diplays for my Kiss Pinball. Must be clean with no burns of course. Preferably something reasonably priced.
Contact:
Shawn Yuzik
Lloydminster, Ab Canada
Posted: 22 May 2009
Looking for a backglass (in very good condition or better) for a Williams Friendship 7 pinball machine. One of the Shay Group's reproduction Friendship 7 backglasses would be great as well.
Contact:
Mark
Rochester, NY
Posted: 22 May 2009
Looking for a Stellar Wars playfield to replace one in a working machine that is badly worn.
Contact:
Bill
Philly Suburbs, PA
Posted: 22 May 2009
Looking for playfield plastics for Volley, Space Mission, and Expressway.
Contact:
Ray Weaver
Wyomissing, PA
Posted: 22 May 2009
Looking for project machine. Paying Cash. Would like Williams. Any condition! Also looking for Williams Beat Time.
Contact:
Robert
Hazleton, PA 18201
Posted: 22 May 2009
Wanted. A backglass for a 1960s Chicago Coin 'Criss Cross Pop Up'.
Contact:
Bob
voice: 570-506-3141
Williamsport, PA. 17701
Posted: 22 May 2009
Looking for 1968 Gottlieb Funland BACKGLASS in excellent/mint condition.
Contact:
Greg Theis
Davenport, IA
Posted: 21 May 2009
Looking for a KISS 1978 Bally backglass. I recently restored my pinball machine and now I am looking for a original or reproduction glass to upgrade the one that I have already.
My current glass is a solid 8.5 out of 10 so I am looking for better then that if possible. I know that Illinois Pinball has NOS stock but I thought that I would try here first in case someone is looking to sell their KISS backglass in excellent shape or better.
If you have this back glass or any leads that can help me in my search that would be apprecated too.
Contact:
Craig Van Buren
3909 Witmer Road
Niagara Falls, New York United States
Posted: 21 May 2009
Looking for nice condition 'Champion' backglass. This is a basketball pin made in 1949 by Chicago Coin. Hope someone has it.
Contact:
Gary
voice: 8609511869
Posted: 21 May 2009
Eight Ball Deluxe MPU board and Sound Board.
Contact:
Rick
Atlanta, GA 30319
Posted: 20 May 2009
Looking for 1979 Williams Stellar Wars play field (new old stock) or used in good shape.
Contact:
Duane
voice: 440 346 0477
Cleveland, Ohio 44146
Posted: 20 May 2009
1947 Chicago Coin Sea-Isle backglass. I like this game, playfield is really nice but it looks silly without the backglass. I hate to sell it off.
Contact:
Dan Burfield
Posted: 18 May 2009
Williams Space Odyssey backglass
Bally Zip-A-Doo lower right slingshot plastic. Will take entire set if necessary.
Backdoors for 1970s Williams 4-player games, 25-1/4"W by 27-3/4"H. I need two.
Contact:
Daina Pettit
voice: 801-277-6296
Salt Lake City, Utah 84117
Posted: 18 May 2009
1972 Bally Time Zone backglass. I've completely restored this machine, all except the backglass. I've exhausted my connections and I think Pacak doesn't have one either. If anyone has one or a lead on Bally backglasses, let me know.
Contact:
Dan Burfield
Posted: 18 May 2009
1980 Gottlieb "Time Line" Backglass, I have an ugly one and need a nice one. doesnt have to be perfect just nice.
Contact:
Paul
Otisville, NY
Posted: 18 May 2009
Cirqus Voltaire playfield, any condition.
Contact:
Brian
Walled Lake, MI 48390
Posted: 18 May 2009
I am looking for the following three Star Wars Data East parts. Anyone know where I can order them?
Left Sling (storm trooper)
Lower Death Star Entry Right (Bobba Fett)
Jabba Bount
Contact:
Kelley O'brien
NC
Posted: 17 May 2009
Wanted Complete Ball Loader and Balls for a Williams Hyperball
Contact:
Nick
935 Wales Ridge Road
Wales, Michigan 48027 USA
Posted: 17 May 2009
I am trying to repair a STERN Power Driver Board and I need the following two parts 22NE10L STP transistor and U-1 which is a 74HCT273 Can anyone help me find these?
Contact:
Max Phillips`
El Reno, OK
Posted: 16 May 2009
I need High Speed II: The Getaway parts.
Looking for the Accelerator board (Controls the supercharger magnets and is found under the playfield) and the optic board for the supercharger.
Contact:
Andrew
Logan, UT 84321
Posted: 16 May 2009
1992 Data East Star Wars translite.
Want an ORIGINAL translite for a DE SW. Must be factory original and NOT a reproduction. Preferrably NOS or excellent condition.
Would also be willing to do an exchange for a Repro translite + $ .If you're an operator who has a SW on site with a excellent translite this may be of interest to you.
Please send details and clear pics of BOTH sides of translite if interested.
Contact:
Scott
Nsw Australia
Posted: 15 May 2009
I need Parts for Old Coney Island (Platine MPU - 2)
Contact:
Herrnstein Thomas
voice: 0043/650/2307434
Eulenweg 3
Feldkirchen In Kärnten, Austria 9560
Posted: 15 May 2009
WTB: backglass for '76 Gottlieb Surfer. Looking for 8/10 or better.
Contact:
Lee Wilk
voice: 410-461-6866
79 Bryans Mill Way
Catonsville, MD 21228
Posted: 15 May 2009
Indiana jones pinball part lower playfield idol assembly with optos. Don't need gold idol.
Contact:
Robert
Fla
Posted: 14 May 2009
1993 Bally Judge Dredd 'Pursuit' plastic light shield
Contact:
Keene Silfer
Posted: 12 May 2009
Looking for a used CPU board for a Paragon Bally machine as-2518-35. Dont really wanna spend the money on a new board (didnt pay too much more for the machine years ago) as I am not 100% sure this will fix it.
Contact:
Steve Bearden
806 Gordon St.
Longview, Texas
Posted: 12 May 2009
Gottlieb Jungle King backglass, must be 9.5/10 or better.
Contact:
Joe
Posted: 11 May 2009
Need the 2 cars for the spinner on the MARIO ANDRETTI pinball game, if you have one or both PLEASE contact me.
Contact:
S Hull
Ohio
Posted: 11 May 2009
Looking for lower cabinet, playfield, and relay board (complete bottom section) for a 1964 Gottlieb North Star. Playfield should be good to very good condition and complete. Ok if cabinet is less than good.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 11 May 2009
Looking for playfield for 1975 Gottlieb Pin-Up. Looking for very good to excellent condition (no paint loss). Missing parts is okay, but should not have badly hacked wiring.
Contact:
Frank Rothdeutsch
Dutchess County, New York
Posted: 11 May 2009
Looking for the Gottlieb Asteroid Annie playfield which was at the Allentown show inside the hall entrance on Sunday. If you picked this playfield up, and would like to sell it, please contact me.
Otherwise, I'm looking for an Asteroid Annie playfield. Prefer one in nice usable condition. Playfield can be stripped, semi-populated, or fully populated.
Contact:
Jim P.
voice: 717-564-1032
Near Harrisburg, PA
Posted: 11 May 2009
Williams reverse wedgehead cabinet, excellent original shape only. Parts games are OK, or just the cabinet. Let me know.
Contact:
Joe
Posted: 11 May 2009
Ballt Time Zone. Looking for a Nice Backglass, little or no flaking and no fade.
Contact:
Rick
WI
Posted: 10 May 2009
I'm looking for a Terminator 2 plastics set. Preferably NOS or a quality reproduction. Will consider a used set if its in near-mint condition (minor warping, absolutely no cracks).
Contact:
Bill Deleo
CT
Posted: 10 May 2009
Looking for a Williams OXO backglass in decent shape. Repro welcome.
Contact:
Kaspar Obeli
voice: +41765264276
Thun Switzerland
Posted: 10 May 2009
Looking for the small center plastic on Aztec playfield.
Contact:
Rick
WI
Posted: 10 May 2009
WANTED - Bally Expressway paperwork - schematics, S/I Cards, etc. Also looking for clean - 25c coin door plastic inserts.
Contact:
Don Owen
Baltimore, MD 21737
Posted: 10 May 2009
1995 Bally Attack from Mars backbox lighting behind translite
I know this is a long shot, but I need the white plastic part that holds the lights behind the translite. It's about 3'x 2' and is about 2 inches deep. Need the wiring harness that goes with it too. If you have a trashed AFM you're parting out, let me know.
Contact:
Ron Kral
voice: 703 478-0077
Reston, VA 20194
Posted: 9 May 2009
Williams pinball parts wanted for Travel Time or early 1970s games. Also looking for williams project machine.
Contact:
Robert
Walnut
Hazleton, PA 18201
Posted: 9 May 2009
1963 Gottlieb Slick Chick- looking for a lock down bar and upper and lower aprons in nice shape. Email with price.
Contact:
Tom Drum
Port Matilda, PA 16870
Posted: 8 May 2009
I am looking for parts for my Williams Rollergames pin. Looking to rebuild it, so anything you have may work. Please let me know.
Contact:
Travis Bruehl
Deltona, FL 32738
Posted: 7 May 2009
I am looking for side art for a Terminator 2 pinball machine. I could make due with just the left side but certainly will take an entire set if it is available
Contact:
Gil Helms
Posted: 4 May 2009
Gottlieb score and instruction cards for FOTO FINISH and HAPPY CLOWN
Contact:
Tony Mather
Posted: 3 May 2009
I am looking for some plastics for Alien Poker. Specifically the top right arch plastic and any other you might have in great shape. I would buy a complete set for the right condition.
Contact:
Bill
Posted: 3 May 2009
I am parting out a 1948 Chicago Coin Football machine. Art glass is gone, all other parts available. If interested please contact me by email for details.
Contact:
Tim Kryzer
voice: 651 737 4269
4365 Little Bluestem Trail North
Lake Elmo, MN 55042
Posted: 3 May 2009
Looking for the dust cover that fit on all play lights on Bally XENON game. Thay are color tubes yellowish red reddish pink. Need all of them can you help?.
Contact:
Joe Fuller
voice: none, fax: none
Meadow Glen Dr
Elkhart, IN 46516
Posted: 3 May 2009
Looking for a mint or near mint Gottlieb 'full' apron and the smaller apron that covers the 'shooting plunger' for my 1977 Sure Shot. Excuse my terminology. I'm a novice in world of pinballs.
Contact:
Bill Rabara
voice: 419-349-1035, fax: 734-847-4560
7443 Bridgeway Dr.
Temperance, MI 48182
Posted: 2 May 2009
1974 Gottlieb Sky Jump NOS or nice used playfield. Email with price and condition. Will pick up in Allentown or ship.
Contact:
Tom Drum
Port Matilda, PA 16870
Posted: 1 May 2009
1979 Bally Space Invaders I need decent plastics for a Space Invaders. The right slingshot is broken in half, and the rest have major bowing even after being heated and flattened. Email with what you have and an asking price.
Contact:
Tim Maleck
TX
Posted: 1 May 2009
Wanted: head unit of a Flash game (head cabinet, wiring, displays and boards; no BG needed).
Contact:
Steve Price
Grand Rapids, Michigan USA
Posted: 1 May 2009
Does anyone have a Ted's head from Road Show, if so please contact me.
Contact:
Annette Kennedy
voice: 02 98341919
8 Utah Place
Erskine Park, NSW Australia 2759
Posted: 1 May 2009
Looking for a Gottlieb PANTHERA backglass as close to mint condition as possible.
Contact:
Ken Orr
voice: 503 788 4213
Portland, Oregon 97266
Posted: 30 April 2009
1947 Chicago Coin 'Pistol' gun game Backglass
Looking for an original or reproduction.
Please let me know if you know where I could have them made.
Contact:
Rich
voice: 209-648-8403
Sonora, Calif. 95370
Posted: 27 April 2009
I am looking to buy these gun games. 1963 Chicago Coin RIOT GUN, 1969 Chicago Coin SUPER CIRCUS with 8 track & audio, 1976 Chicago Coin CONEY ISLAND, 1969 Williams SPOOKS, 1970 Williams BONANZA, 1974 Midway GANGBUSTERS, 1974 Kasco UNTOUCHABLE
Contact:
Chris Cragg
voice: 805-938-0799
Posted: 27 April 2009
1965 Williams Big Chief. Looking for the selector disc plastic. It is at the upper left top of the playfield.
Contact:
Jimmy Hefner
voice: 405-659-0563
3150 NW 24th St
Okc, OK 73107
Posted: 26 April 2009
1976 Playmatic Fandango backglass: It does not need to be in mint condition. Good or better would be fine.
Contact:
Robert Mem
Oakland, CA
Posted: 25 April 2009
I need a part for my Johnny Mnemonic pinball. Someone told me the part I need is called the Ramp Protector. I have a link to the picture. It's over the left ramp for the Johnny Mnemonic pinball. I also need the decals or stickers for that piece.
Contact:
Steve
CA 91301
Posted: 25 April 2009
Wanted:
Frontiersman plastics, and other parts
Jungle Lord backglass
Rockmakers backglass
Contact:
Steve Price
Grand Rapids, MI
Posted: 24 April 2009
Looking for Gottlieb Crescendo Backglass in 8+ condition.
Looking for Chicago Coin Casino Backglass in 8+ condition.
Contact:
T.bouwkamp
Niles, MI 49120
Posted: 23 April 2009
1985 Gottlieb Bounty Hunter Sound Board with daughter board
Williams High Speed backglass
williams Big Deal (EM) backglass
Contact:
Wayne's World Of Home Amusements
voice: 386-748-4946
163 North Frederick Street
Pierson, Florida 32180-2380
Posted: 21 April 2009
Wanting Freds Choice Plastic 'A' off a Flintstones.
Contact:
Peter
William
Melbourne, Vic 3147
Posted: 21 April 2009
1969 Williams Miss-O: Looking for a backglass in decent condition. Can pick up at Allentown show.
Contact:
Terry
Posted: 20 April 2009
WANTING: head box decales for a Flintstones.
Contact:
Peter
William
Melbourne, Victoria 3147
Posted: 20 April 2009
For a 1959 Gottliebs Queen Of Diamonds. Still looking for the Mechanics board, located on the very bottom of the main cabinet. It contains the Score Motor, Transformer, as well as a variety of Relays and Contacts. The unit that controls the action of the Spinning unit behind the back glass is missing. I thought I had one located. It turned out to be an offer from some jerk in the west indies. I asked him if the wood on this unit was painted Red. He said he had a red one for sale. Any help will be greatly appreciated. They are out there, you have to be careful.
Contact:
Bill
voice: 203-734-1076
CT
Posted: 19 April 2009
1991 Bally Party Zone, in need of a working Captain B.Zarr head motor, part no 14-796 12V. This rotates the captain's head. Does anyone carry them new? Also in need a cosmic cottage assembly (top of shooting lane) and rocket ship assembly (lower left ramp) in good condition Compleat.
Contact:
Paul L
Sydney, N.s.w. Australia
Posted: 18 April 2009
1978 Bobby Orr Power Play - Right slingshot plastic (American Flag)
Contact:
Barry Harper
Canada
Posted: 17 April 2009
For pick up at Allentown:
Gottlieb Surfer cabinet/parts game
CCM Funland rifle (or any mid 70s CCM rifle);
United Bowling Alley (1956 ball bowler) backglass;
GTB Top Score/300 playfield;
WMS Olympic Hockey plastic (top left);
GTB Scuba plastic (with the octopus on it);
WMS Touchdown Cabinet (with original art);
BLY Expressway (or similar) head (just the backbox, no guts);
WMS ANY 1960 cabinet bottom(funky 'front shelf' style);
Backbox 1968 2 player Bally;
Cabinet for Wms Lady Luck (with original art);
GTB Grand Slam Cabinet (with original art);
GTB Big Hit motorboard.
GTB 1962 Cabinet bottom
GTB Soccer cabinet with original artwork
Contact:
Mark C. Roller
voice: (863) 206 5402
Posted: 17 April 2009
I need a set of nos Terminator 2 pinball decals or a reproduction set
Contact:
Alex Brown
New York
Posted: 17 April 2009
I need a Willaims palisades wiring diagram in good condition or new/reproduction
Contact:
Alex Brown
New York
Posted: 17 April 2009
Zaccaria Magic Castle backglass
Contact:
Massimo
Milano - Italy
Posted: 17 April 2009
Looking for a NOS Data East Star Trek 25th Anniversary ramp.
Also Looking for a NOS Williams Star Trek TNG klingon ship.
Contact:
Marco
Australia
Posted: 16 April 2009
Weird request here, but does anyone have measurements/specs of late 70's Bally Cabinets? Need to reproduce one and any help would be appreciated for some good measurements, specs, etc.
Contact:
David
Posted: 16 April 2009
Alca Target UFO Electo-mechaical arcade schematics and manual wanted
Contact:
Jack Gordean
Acton, CA 93510
Posted: 15 April 2009
I'm looking for a 1985 Williams Sorcerer backglass.
Contact:
Dave Baumann
Posted: 15 April 2009
Looking for parts for 1950 Dale/Exhibit Supply Six Shooter gun game
1) Backglass in good condition mine has crack in corner, but still presentable.
2) Back Door
3) Front Coin door
4) Score & Instruction cards
Contact:
Moe
Posted: 15 April 2009
1952 Gottlieb Queen of Hearts coin box
Contact:
Ronald Swatski
Posted: 14 April 2009
Looking for a wiring harness for a Bally Eight Ball Deluxe pinball. Need the playfield to circuit boards wiring harness.
Contact:
Steve
Florida
Posted: 11 April 2009
Looking for a backglass for a Williams Pit Stop. Any condition considered. Please let me know price and condition.
Contact:
Brian Williams
voice: 920 565-3021
N9358 Franklin Rd
Elkhart Lake, WI 53020
Posted: 10 April 2009
Williams/Sonic gate: Looking for the solenoid operated gate (the gate, not the solenoid) for Sonic Faces. It is Williams part A-4817-L-Modified.
Contact:
Bell Springs Pinball
Posted: 10 April 2009
Looking for a backglass for a 1976 Space Odyssey pinball machine.
Contact:
Blake Ausbrooks
voice: 580-772-6559
1533 Saber Lane
Weatherford, OK
Posted: 8 April 2009
SAM II, Stern Service Assistance Module II. I've run across one of these factory test fixtures. Is anyone familiar with these units? Does anyone have an operating manual? Any relavent information would be greatly appreciated.
Contact:
Steve
Jacksonville, FL
Posted: 7 April 2009
1969 Bally Space Flight 'Front to Rear' Trolley Motor and/or Parts Machine Needed ASAP! The motor runs but the gearbox is not operating. Parts machine also seriously considered if motors are working. Will pay! Will pay!
Contact:
Fred Bobrow
voice: 917-887-3554
Posted: 6 April 2009
1978 Bally Star Trek bottom cabinet needed. In the Texas and surrounding states area.
Contact:
Marc
Texas
Posted: 6 April 2009
Looking for a decent lower apron for a Gottlieb Add A Ball game, any one will do from the 70's.
Contact:
Joe Grenuk
Posted: 6 April 2009
PLAYFIELD PLASTICS NEEDED:
Williams Jokerz: left slingshot
Data East Star Trek: The girls that go over each slingshot plastic
Williams Firepower: The plastic that goes over the right-center target bank, over targets 4,5,6.
Used but uncracked is fine. Repros are fine.
Contact:
Mike
Posted: 6 April 2009
1973 Gotlieb Hot Shot playfield plastics, nice condition but not broken
A-14604-R
A-14604-L
C-14606
C-14605
Center piece under the bumper (don't have number)
Contact:
Robert Tepper
voice: 352-382-1841
FL 34446
Posted: 5 April 2009
1999 Bally Revenge from Mars 'kit'
Looking for the complete conversion package to be able to convert my Star Wars Episode I. Allentown delivery ok if not local.
Contact:
Jim
Bergen County, NJ
Posted: 4 April 2009
1988 Williams Cyclone Ferris Wheel Ramp-useable condition.
Contact:
Chris Dixon
Bc Canada
Posted: 3 April 2009
I am looking for any information on the Bally add a ball kits. I have a MiniZag 1968 Bally that has an option to add the cable and kit for add a ball. Do you have a print with it on there? Any information will be helpful.
Contact:
Bob Graham
Columbia, TN 38401
Posted: 3 April 2009
Looking for a Qberts Quest backglass. Prefer an 8 or better out of ten. Will consider others.
Contact:
Brian
Posted: 3 April 2009
Wanted spare parts for Atari's Hercules. Let me know what you have.
Contact:
Brian
Posted: 3 April 2009
Parts wanted for DE Robocop: plastic set for lower playfield or at least plastics for slingshot bumpers, laserkick, and center guard directly underneath middle popbumper.Also need the blue plexiglass piece in top right corner of backbox where it says 'in digital stereo'. Plastics must be in very good condition at reasonable price.
Contact:
Mike Myers
Posted: 2 April 2009
Williams Pharaoh: Looking for Chamber plastic
Contact:
Todd Svec
Sparks, NV 89436
Posted: 2 April 2009
Looking for glass and coin door for Big Daddy Williams pinball machine.
Contact:
William Trulock
Posted: 2 April 2009
1965 Bally Deluxe Fun Cruise or Gay Cruise backglass or entire machine in excellent condition.
Contact:
Randy
Long Beach, CA
Posted: 1 April 2009
Apron or card tray for 70's Gottlieb Add a Ball. Also, need arch cover (the part at the top of the playfield that has the serial number attached to it)
Contact:
Jack
Atlanta, GA
Posted: 1 April 2009
Looking for Kings of steel parts. I need the plastic center target, and the plastic piece that goes over the center target from post to post.
Contact:
Kevin
Spring Grove, IL
Posted: 1 April 2009
Williams Black Knight 2000 Short habitrail 'tube' which drops the ball from below the flipper on the upper playfield onto the lower playfield
Contact:
David Dutton
20 Station Road
Marsden, West Yorks Hd7 6dg
Posted: 1 April 2009
Gottlieb score and instruction cards for HAPPY CLOWN and THORO-BRED.
Contact:
Tony Mather
Posted: 31 March 2009
Looking to buy an EM arcade game. I would rather it be non-working, but will consider working ones as well. Please email or give me a call.
Contact:
Randy
voice: 757-868-4304
Poquoson, VA 23662
Posted: 30 March 2009
1962 Williams Tradewinds Trade Winds Pinball backglass wanted. Any condition. Also advise if any other parts available. Also looking for a complete Tradewinds machine in good condition.
1963 Gottlieb Swing Along backglass wanted.
Don't want to sell? I also have other backglasses for trade - Baseball pitch and bats Official Baseball and Pinch Hitter, GTB Kings and Queens, and WMS Heat Wave.
Contact:
Don Klein
San Juan Capistrano, CA 92675
Posted: 28 March 2009
Bally Carnival 1957 2 Player. Looking for machine in restorable to excellent condition. Please email pics and/or call.
Contact:
Pinball Revival Company
voice: 415 883 4180
372 Bel Marin Keys Blvd
Novato, CA 94949
Posted: 28 March 2009
1981 Bally Fireball II playfield plastic set, either nice used or NOS. Email with price please.
Contact:
Tom Drum
voice: 814-692-7117
Port Matilda, PA 16870
Posted: 27 March 2009
Bad Cats Williams NOS cabinet decals game is 1999 bright orange.
Contact:
Ken White
voice: 650 400 0207
833 N Idaho St
San Mateo, CA 94401 USA
Posted: 27 March 2009
Need backglass to a Gottlieb 1970 Aquarius as well as top right playfield plastic.
Contact:
Ken Head
Southlake, Texas
Posted: 27 March 2009
I have an unused Alan Meyer repro backglass for Black Knight 2000 for sale. $350 or best offer. This is the glass with the bright red colors. Looks great.
Still in original box. Pics available on request. Shipping is available at cost. Insurance required
Contact:
Steve Hess
24 Ilinka
Irvington, NY 10533
Posted: 26 March 2009
Midway Duck Hunt. Looking for parts/photo cells/etc.
Contact:
Joe
Buffalo, NY 14220
Posted: 26 March 2009
1965 Williams Big Chief Plastic Set- mainly the upper left spinning wheel.
Contact:
Ernest Solis
voice: 830-708-2107
427 Aaron Ln
New Braunfels, TX 78130
Posted: 25 March 2009
Need 1961 Gottlieb Oklahoma backglass in good condition.
Contact:
Wayne
Posted: 25 March 2009
Want to buy Original Pinball flyers in good condition, any make, any style. Willing to pay fair price for any quantity. Email your list and price.
Contact:
Tony
Brisbane, Australia
Posted: 25 March 2009
1961 Williams Kismet Lockdown bar -- not specific to this machine. Not worried about cosmetic condition as long as it's complete. This is the lockdown bar with the removable end pieces. Believe this is identified in the 1966 catalog as D-5835 with 21B-6597(RH)+ 21B-6596(LH)
1961 Williams Kismet Swinging target assembly -- in the 1962 parts catalog this is shown as B-5839. ('66 catalog shows B-6045 and '74/'75 catalog shows B-6045R)
Contact:
Alfred Forbrich
voice: (403) 769-2113
Calgary, Alberta T2z3g9/canada
Posted: 23 March 2009
Wanted: Backglass For a 1948 United Rondavoo Any Comdition Wanted. I just Need One Shippers Broke Mine. Also I need a backglass for Data East Monday Night Football. Also need a 7 or better backglass for a 1963 Williams San Fransico.
Contact:
Gary Eggers
voice: 5074403552
2559 490th St.
Stacyville, IA. 50476
Posted: 23 March 2009
Bobby Orr Power Play and Spiderman, The Amazing (1980) playfields, with all plastics. Any condition. Drop Targets, assemblies and coils on back side are not important.
Contact:
Michael Maxwell
voice: 434-944-3691
Bedford, VA USA
Posted: 22 March 2009
Data east Monday Night Football Back Glass In Fair Useable Shape. Doesnt Have to Be perfect. Name Price with Shipping. Scammer beware. Tracker is Here.
Contact:
Gary Eggers
voice: 5074403552
2559 490th St.
Stacyville, Iowa 50476
Posted: 21 March 2009
Data East Rocky and Bullwinkle Nell Log Gear/Pulley Assembly.
Contact:
William Longo
Posted: 21 March 2009
Many items wanted: plastics for Twister pinball machine, and pinball lift/jack for easy moving/transferring of pinball machines.
Contact:
Virginia Owen
voice: 419-646-3475
15409 Old State Route 12
Columbus Grove, Ohio 45830
Posted: 21 March 2009
Wanted Adams Family Cabinet or one that I can put the game in. Can pick up at Allentown Show (on Saturday) or can drive to your location, if it's not too far away.
Contact:
Elm City Neon
voice: ( 203 ) 230 - 8300, fax: same
374 Treadwell Street
Hamden, CT. 06514
Posted: 21 March 2009
1989 Williams Whirlwind.
I am looking for the upper right Ball Guide Assembly (Williams PN A-13360). Please let me know if you have this metal piece for sale.
Contact:
Brian Wahlen
Briwn Deer, Wisconsin 53223
Posted: 20 March 2009
Looking for plastics (esp the time expander) for a Doctor Who.
Contact:
Brent Stiles
Cincinnati, OH
Posted: 20 March 2009
Looking for Friendship 7 1962 Williams Backglass, also front lockdown bar for the game.
Contact:
Bart
Oklahoma
Posted: 19 March 2009
1948 Bally Heavy Hitter original wood stand. Any condition. Please call Bert if you have one for sale.
Contact:
Bert Oppenheim
voice: 508.320.9725
Medway, MA 02053
Posted: 18 March 2009
1975 Gottlieb Spin Out plastic wanted.
1974 Gottlieb Magnotron center plastic wanted.
Contact:
Don
voice: 510-714-5589
38838 Jonquil Dr
Newark, CA 94560
Posted: 18 March 2009
1981 Williams Barracora backglass - NOS/9+ condition desired and willing to pay your price. Also have other NOS/rare parts if trades are preferred.
Contact:
Dave K.
Posted: 18 March 2009
I need electric diagram of the Far Out pinball.
Contact:
Celso Ricci
Rua Cecilia M. Gaboardi,116
Itatiba, São Paulo Brasil
Posted: 17 March 2009
Looking for a backglass for Chicago Coin Riviera, also Bally Champ 4 player backglass. Please let me know.
Contact:
Joseph Pfeifer
voice: 631 748-1279
55 Franklin Street
Amityville, N.Y. 11701
Posted: 17 March 2009
I'm looking for a Rudy lampshade for a Funhouse machine. Mine is completely missing. I need the whole lampshade assembly including the standoff piece and the plugin to plug the lamp underneath the playfield. Can anybody help?
Contact:
David Lougy
voice: (619)248-9365
2801 Capps St.
San Diego, CA 92104
Posted: 17 March 2009
Bally EM Coin door and Frame, Looking to purchase a Bally coin door and frame suitable for a 1971 Bally Odds and Even. Email me with condition and a price.
Contact:
Barry Harper
Ontario Canada
Posted: 15 March 2009
Looking for a 1979 rolling stones playfield in great shape. Also a kiss play field in great shape.
Contact:
Dino
Posted: 15 March 2009
Looking for a decent Solar Fire backglass. Will pay for a nice example. Also would be interested in Solar Fire upper and lower playfields if they were upgrades to what I have now.
Contact:
Mark
voice: 248-921-3981
Commerce Twp., Michigan
Posted: 15 March 2009
Looking for someone who restores playfields. Also looking for someone who restores pinball machines, the outside and all over.
Contact:
Dino
Posted: 15 March 2009
Need Headglass for 1947 Esco Fast Ball Pinball.Must be in very good cond.Tough item to find -if you know of a silksceen co that can handle a copy let me know please
Contact:
Robert Feeney
voice: 5169246448
Islip, NY 11752
Posted: 15 March 2009
Wanted to trade. Gottlieb legs, I have a perfectly good 31" set of 4 on my game, but my game is supposed to have 27" legs. Trade anybody?
Contact:
Greg
Posted: 15 March 2009
1984 Bally/Midway Spy Hunter pinball - backglass, playfield plastics, spinner, bumper cover, side art.
Contact:
Brad Stith
Posted: 14 March 2009
Wanted, Gottlieb Counterforce in good working condition. Will consider something that needs work. Also wanted Williams Solar Fire in good working condition. Please contact Art Johnston.
Contact:
Art Johnston
voice: 845 742 1264
Monroe, NY
Posted: 14 March 2009
1977 Bally Power Play (Bobby Orr) Right slingshot plastic (American flag) Good used condition to mint.
Contact:
Barry Harper
Ontario Canada
Posted: 13 March 2009
Hot Shots (Gottlieb 1989) NOS translite. Have lots of cool stuff to trade or can buy outright.
Contact:
-danno-
Posted: 13 March 2009
Looking for an original 1960 United Sure Fire shuffle alley schematic. Also looking for 2 triangular inserts 2 13/16 for puck or ball bowler and maybe pinball too.
Contact:
Pascal
Quebec Canada
Posted: 13 March 2009
1961 Gottlieb Big Casino - looking for a nice set of playfield plastics (there are only 2 near the flippers)
Contact:
Tony Mather
Posted: 12 March 2009
1965 Gottlieb Thoro-Bred - looking for a nice set of playfield plastics and instruction card for this game.
Contact:
Tony Mather
Posted: 12 March 2009
Looking for a 1979 Bally Rolling Stones playfield. In great shape.
Contact:
Dino
Venetia, PA USA
Posted: 12 March 2009
WTB: Williams High Speed backbox red beacon topper insides 'the flasher unit and mounting.'
Contact:
Bob Kugler
Posted: 12 March 2009
1987 Gottlieb Monte Carlo. Looking for a translite for this machine, in good or better conditions.
Contact:
Sylvain
Ottawa, Ontario Canada
Posted: 11 March 2009
1979 Game Plan Star Trip. M-120 Coctail Table Pinball Game.
I need the ribbon cable that connects the MPU-1 to the two display boards. Anyone having parts for this game can contact me, I would like a few parts.
Contact:
Lawrence Martin
voice: 408-569-2875
70 Topeka Ave.
San Jose, California Vferc
Posted: 10 March 2009
Full house or Top Hand--center plastic that covers card area
Contact:
John
Posted: 9 March 2009
Need a Backglass for a Bally Harlem Globetrotters on Tour Pinball Machine. Need a good looking one for a near completed restoration.
Contact:
Eric Shearin
982 White Level Rd
Louisburg, NC
Posted: 9 March 2009
I am looking for extra wireform ramps from 1990 - 1999 Bally/Williams DMD pinballs. Mostly looking for ramps from Indiana Jones, Medieval Madness, Theatre Of Magic, Shadow, Champion Pub, Addams Family, Tales Of The Arabian Nights. Anybody have these from parted out games, or ones that they replaced? I would also consider ramps from other games, so if you have something, check with me. I am also looking for some extras of the wire apron guards. I need some widebody ones from either a Twilight Zone, or Indiana Jones, and I also need some of the standard size ones which are very common and come on games like Shadow, Addams Family, CFTBL, Theatre of Magic, and so on. Please contact me if you have any of these pieces, and would like to sell them.
Contact:
Michael Chestnut
voice: 615 - 824 - 6116
129 Grassland Drive
Gallatin, TN 37066
Posted: 8 March 2009
Wanted:
Bally NOS playfield for Mystic
Bally NOS playfield for Supersonic
Bally NOS playfield for Hang Glider
Bally Hang Glider backglass
Contact:
John
NJ
Posted: 8 March 2009
WANTED: Judge Dredd Crane Cover Plastic (NOS or Used and uncracked)
Contact:
Fred Collins
CO
Posted: 8 March 2009
Looking for playfield plastics for the following Gottlieb games:
Hurdy Gurdy
Central Park
Flipper Fair
300
Looking for playfield plastics for Williams San Francisco.
Contact:
Mike
Carmichael, CA
Posted: 7 March 2009
1961 Williams Batting Champ, reproduction or mint backglass.
Contact:
Stuart Green
1 Edgecomb Road
Binghamton, NY 13905
Posted: 5 March 2009
Jackbot plastic one in particular in front of spiral ramp on right.
X-Files under-ramp decals old(attached or not)-new-repro or help on making some.
Let me know of any and all game specific parts for either of these games you may have available.
Contact:
Jimmy P
Posted: 5 March 2009
Looking for a copy of Stern Stars and Strikes Ball Bowler. Any help?
Contact:
Robert
voice: 740 385 0240
Ohio 43138
Posted: 5 March 2009
I'm chasing the plunger/launcher (its should be in the shape of a rod) for my Fishtales game.
Contact:
Mick
Belmont, Victoria Australia 3216
Posted: 5 March 2009
Looking for a Gottlieb Volley backglass. Your help would be much appreciated.
Contact:
Dean Pierce
Eagan, MN
Posted: 3 March 2009
WTB: Super Score/Hi Score playfield, Gottlieb.
Contact:
Joseph Colizoli
Po Box 295
Bellevue, Ohio 44811
Posted: 3 March 2009
I've been looking for an populated PF for a 1976 Gottlieb Solar City for a few years now. Can anyone help me?
Contact:
Tim
Triangle, Woodbridge, Fredericksburg, VA
Posted: 3 March 2009
Wanted, Repairible and / or parts circuit boards. I am looking for Williams Level 3, 4, 6, and 7 solenoid driver boards, early Bally Lamp and solenoid driver boards, Gottlieb system one and system 80 solenoid driver boards. MPU/CPU Boards? You must price them for what they are. The more the better to save on shipping. Let me know what you have and want. No photos nessesary. My intent is to rebuild and re-sell as a service to the preservation of pinball.
Contact:
Nabours Novelty Inc.
voice: 3209635953
320 Highway 55 West
Maple Lake, MN 55358
Posted: 2 March 2009
1977 Gottlieb Vulcan / Fire Queen complete plastics set - looking for mint.
Contact:
William Gates Iii
Wilmington, Delaware
Posted: 1 March 2009
1986 - Juegos Populares - America 1492
Unidad Central De Procesos (295-001)
Unidad Drivers (295-115)
Unidad Del Sintetizador (295-216)
Need this three PCB for an America 1492 by Juegos Populares (Spain).
Note: Some others pinballs from Juegos Populares have the same PCB.
Contact:
Jorge Fernandes
voice: 966369206
Rua Dos Moinhos N.º 104 1.º Traseiras
São Mamede DE Infesta, Matosinhos 4465-689 São Mamede DE Infesta
Posted: 1 March 2009
last action hero data east. I am looking for a last action hero playfield complete or mostly complete. Would also consider a cabinet and playfield, no boards, let me know if you got anything.
Contact:
Mike
Posted: 28 February 2009
Terminator 2: I am in need if a headbox to a Terminator 2 pinball. Decals would also work. Any help would be appreciated.
Contact:
Mike
Posted: 28 February 2009
Need a Flash Motor Unit or the wiper fingers (5) for a Bally Space Time machine
Contact:
Dan Allison
Posted: 27 February 2009
United Star Slugger: Looking for a head for a United Star Slugger or Super Star Slugger. Can trade or buy outright.
Contact:
Jack Gordean
Acton, CA 93510
Posted: 26 February 2009
1991 Data East Star Wars 520-5003-03 CPU does not need to be complete. None hacked though.
Contact:
Bruce
Posted: 25 February 2009
Looking for a 520-5003-03 Data East CPU. board itself needs to be in good condition, however if its not complete for a decent price I will be interested. No hacked up or bad acid damage.
Contact:
Bruce
Posted: 25 February 2009
1978 Bally Star Trek backglass needed. If any one has any other parts contact me.
Contact:
Frank
Waco, TX United States
Posted: 24 February 2009
I have a late 1970s Pompeii bowling game that has a broken piece to the #2 pin, it's a plastic arm that retracts the pin upward, almost a half moon shape with a spring on it with an arm that has a curved piece on the other end.
Contact:
Christopher Hoffman
voice: 716-863-8554(cell)
234 Pleasantview Dr.
Lancaster, NY 14086
Posted: 24 February 2009
1975: Bally: Blue Chip: Need the lockbar for a 1975 Bally Blue Chip 6 card bingo pinball machine. Preferablly in good shape, though Mint condition is not necessary. This is for the Blue Chip made in 1975 by Bally, not the Blue Chip produced in 76 by Williams.
Contact:
Bryan Whipple
voice: 813-679-4968
112 Lena Ann Drive
Saint Cloud, Florida 34771
Posted: 23 February 2009
Wanted: Data East CPU/MPU board version 2 or newer.
Contact:
Joy
Posted: 23 February 2009
Atari Superman lock down bar and side rails that hold glass.
Contact:
Brian Faranda
Posted: 22 February 2009
Bally Blackwater 100 any plafield ramps. Must be unbroken. Email me.
Contact:
Brian C. Faranda
Posted: 22 February 2009
I am after 1 x full set of cannes plastIcs
Contact:
Matt
Australia
Posted: 22 February 2009
Need Roto Target wheel for 1968 Gottlieb Domino.
Left sling plastic for Gottlieb Bank a Ball 1965
Contact:
John
NJ
Posted: 22 February 2009
Looking for a Gottlieb lower apron. It would come from one of the following games: World Fair, Tropic Isle, Rack A Ball, Gigi, Slick Chick, Sweet Hearts, Cover Girl, or Olympics. I believe all these games have the same apron. If you have one of these machines to part out, I just need the lower apron in good condition. Willing to pay above market value for a nice one.
Contact:
Dave
voice: 618-833-4012
IL
Posted: 21 February 2009
1994 Data East Tommy Flipper Blinders and servo motor, wanted. Also need plastic for the Union Jack area.
Contact:
Scott Henderson
Posted: 20 February 2009
1991 Williams Terminator 2 looking for NOS or near mint speaker panel. Only need the plexi glass insert.
Contact:
Paul
Burlington, N.J
Posted: 19 February 2009
I am looking for a 1980 Stern Quicksilver playfield in nice shape.
Contact:
Gary Edwards
989 Center Rd.
Clinton, OH 44216
Posted: 19 February 2009
1951 United County Fair wooden coin door wanted.
Will pay your price if you got an original one. I am also considering other coin doors from same era that would fit this game. External dimensions are approx. 11" 1/4 by 7" 1/4.
Contact:
Rick
Posted: 18 February 2009
1986 Williams Pinbot -- looking for the green rectangular visor target--must be new or like new. Could also use the light blue plastic that covers the ramp hinge and the Plastic that goes near the shooter lane that has the people in it-- nice used O.K.
Contact:
Wes Dolen
voice: 239-643-1100
2066 50th Ter. SW.
Naples, FL. 34116
Posted: 18 February 2009
Looking for a Solar Ride EM playfield for my pinball. I will come in Allentown the 1, 2 and 3 May.
Contact:
Fabrice Mourgues
2 Place Bellon
Chabeuil, France Drome 26120
Posted: 18 February 2009
I am looking for parts to a Williams Flintstones pinball machine.
1) I need the decorative silkscreened plastic that covers the dot matrix display and goes around the speakers.
2) I need playfield plastics Fred's Choice B, and Joe's Diner, and the plastic that is directly underneath Joe's Diner sign.
If you have any of these individual parts, or a complete set, that you are selling, please contact me.
Contact:
Roy
voice: 847-971-1076
Hoffman Estates, IL 60192
Posted: 18 February 2009
Looking for a nice black knight 2000 apron, one without small cracks in the paint.
Contact:
D.carr
Milford, MI
Posted: 18 February 2009
1995 Bally Theatre of Magic Translite wanted. Would prefer NOS, but excellent condition used is fine. Please advise cost and location.
Contact:
John Hoge
2051 Sawyer CT.
Holland, OH 43528
Posted: 17 February 2009
Jurassic Park Plastic
Plastic behind 'control room' scoop
Condition can vary, needs to be intact.
Contact:
Brian
Chantilly, VA 20152
Posted: 17 February 2009
1991 Data East Star Trek I am looking for the Under the playfield ramp called "Under Chute Assy." part # 500-5400-00
Contact:
Mark Willobee
voice: 248-505-1123
Rochester Hills, MI 48309
Posted: 16 February 2009
WTB: Theatre of Magic Translight
Contact:
John Hoge
2051 Sawyer CT.
Holland, OH 43528
Posted: 16 February 2009
1977 Williams Big Deal plastics. Good repo OK. Also interested in scanned file of the plastics.
Contact:
Jay Nogle
Posted: 15 February 2009
'54 Williams Colors 100 Step Unit (D-4798)
I need the 100 Step scoring unit for this game. Any Williams woodrail with lightbox scoring would have used the same unit.
My Lock Arm Assembly (A-5524) is missing the tab that keeps the unit from restting while advancing. A close-up picture of this piece might allow me to repair what I have but it would be simpler if I can find a complete unit.
Contact:
Steve Yates
voice: 216-554-1175
Middleburg Hts., Ohio 44130
Posted: 14 February 2009
I am looking for the backglass in normal (good shape)for Pinball Machine 'SUNSET' produced by Gottlieb in 1962.
Contact:
Uwe Kröger
Stieglitzweg 2b
27607 Langen, Germany
Posted: 14 February 2009
Looking for a 5 cent coin acceptor/rejector that will fit a 1959 Gottliebs Queen of Diamonds. It is a little shorter than the standard 5 cent coin accepter/Rejector.
Contact:
Bill
voice: 203-734-1076
Connecticut
Posted: 14 February 2009
Looking for a nice set of King Kool/Rock plastics.
Contact:
Joe
voice: 610-585-4168
Palmerton, PA
Posted: 13 February 2009
Looking for rolling stones, playboy, and kiss backglasses or playfields. Any shape.
Contact:
Chris Keene
Chattanooga, TN
Posted: 13 February 2009
Still looking for a Gottlieb Spirit of 76 backglass and a Williams Triple Strike backlgass. Some fading is okay, but I prefer there to be little to no flaking. Please let me know what you have so I can restore these machines as they both are missing the glasses completely.
Contact:
Darryl Anderosn
Brooklyn Park, Minnesota
Posted: 13 February 2009
I am looking for Space Odyssey or Space Mission pop bumper caps. Blue or yellow. Looking for one or two caps.
Contact:
Nick
Clarkston, MI
Posted: 12 February 2009
1979 Bally Mystic Backglass Wanted.
Contact:
Charles
voice: -, fax: -
-
-, MI -
Posted: 10 February 2009
I'm looking for a Earth Shaker Back Glass. I'll buy or trade. I've got lots of old pin parts.
Contact:
Steve M
voice: 360.701.7881
Olympia, WA
Posted: 8 February 2009
1971 Gottlieb Pop-A-Card playfield. Will consider any condition.
Contact:
Rick Swanson
Morristown, Tennessee
Posted: 7 February 2009
1972 Williams Winner Backglass -- good to mint.
Contact:
Fred Bobrow
412 Main Street
Beacon, NY 12508
Posted: 7 February 2009
Looking for Gottlieb 'Jacks Open' Orignal Score & Insrtuction Cards.
Contact:
Moe Mizrachi
Posted: 7 February 2009
Wanted, original flyers for a Bally KISS and a Gottlieb Panthera. Please let me know condition and price.
Contact:
Ken
voice: 503-788-4213
Portland, Oregon 97266 USA
Posted: 7 February 2009
Looking for a TWEETY ramp from Bugs Bunny Birthday Bash - used is OK. Please send a picture and the price you are asking for this item including shipping by post to Canada. The email IS valid.
Contact:
John Robertson
voice: 604-872-5757
2343 Main St.
Vancouver, Bc V5t 3c9, Canada
Posted: 6 February 2009
Looking for center plastic (card area) for 1966 williams Top Hand or maybe even a scan so I could recreate it.
Contact:
John
Posted: 6 February 2009
Data East Sound Board Wanted
#520-5050-02: used on Star Wars, Rocky & Bullwinkle, and Jurassic Park.
Let me know pricing!
Contact:
Buck Stine
voice: 321-284-6315
Kissimmee, FL 34769
Posted: 4 February 2009
Looking for a Champion Pub backglass. Email with details
Contact:
Steve Hess
Irvington, NY 105533
Posted: 3 February 2009
Bowler backglass wanted for Bally ABC small ball bowler and C Coin STARLITE shuffle bowler upper and C Coin GOLD MEDAL and FLEETWOOD ball bowler belly glass.
Contact:
Steve
voice: 1815-726-6164
821 Kelly Ave
Joliet, IL 60435
Posted: 2 February 2009
1964 Midway Space Gun - need complete target assembly unit or complete game.
Contact:
Moe Mizrachi
Posted: 1 February 2009
1992 The Addams Family (TAF) arch wanted. Any condition. Cheaper the better.
Contact:
Martin
Berlin, Germany
Posted: 1 February 2009
Early 60s era Williams Lockbar Wanted. I'm after an early 60s Williams lockbar, in particular, a lockbar for a 1961 Williams Reserve. I believe that a Kismet lockbar is the same as well.
Contact:
Steve Corley
Colorado 80111 United States
Posted: 1 February 2009
Looking for pinball kicker coil #A61400047 from an evel knievel home model pinball machine.
Contact:
Mike D
229 Willis Ave.
Hawthorne, NY 10532
Posted: 1 February 2009
1965 Gottlieb Cowpoke - Populated playfield or parts from the playfield.
Contact:
David Hoover
Trivoli, Illinois 61569
Posted: 31 January 2009
1967 Gottlieb Melody backglass. In search of a very nice example.
Contact:
Mike Kapeller
6017 Rainbow Circle
Lincoln, NE USA
Posted: 31 January 2009
Alive Pinball by Brunswick. Need schematics for PC board. Plays for 30-60 minutes and then malfunction, but plays properly after cool down. Or make offer to buy game.
Contact:
Perry
St. Louis, MO 63114
Posted: 31 January 2009
Looking for:
65 Gottlieb Bank a Ball 8 Ball backglass animation ball. Any will do.
Gottlieb Top Card playfield in nice condition.
Gottlieb Quick Draw/Fast Draw playfield in nice condition.
Bally Frontier playfield. NOS or nice condition.
Contact:
John
NJ
Posted: 31 January 2009
1975 Top Score (2 player): I've received this last week and need a lot off spares. PLease let me know what you have and at what price.
I need Top Glass, right rail/glass hold
Rubbers
The playfield is in a very bad state. I'll need another one or a fullsize template
Contact:
Pw
Posted: 30 January 2009
Looking for a Eight Ball Deluxe backbox (with backbox light board) or at least wiring harness for it.
Contact:
Michael Chomiczewski
345 S. Fairfield
Lombard, IL 60148
Posted: 30 January 2009
I have a clean working Gorgar CPU and Driver I would like to trade for a working CPU for a CPU board for a Judge Dredd.
Contact:
Rick
Portage, In.
Posted: 28 January 2009
1947 United Mexico Flipperless Pinball Machine. It was my grand fathers and it needs some serious help to allow his great grandsons to have some fun with it. I found a guy willing to work on it but he's needs a wiring type diagram/manual. Please let me know if you'll sell me one or copy yours for a fee.
Contact:
Don Telaak
voice: 704-907-7817
Posted: 27 January 2009
Wanted for Gottliebs 1959 Queen Of Diamonds. The complete Board containing all the Relays as well as the Score Motor found in the bottom of the Main Cabinet. Must be complete.
Contact:
Bill Harkins
voice: 203-734-1076
Ansonia, CT
Posted: 27 January 2009
I am looking for a set of 82 Gottlieb Rocky plastics.
Contact:
Steve
Posted: 26 January 2009
1958 Williams Gusher backglass wanted - any condition considered - email photos and price.
Contact:
Barry
Posted: 25 January 2009
Looking for Gottlieb 'North Star' Cabinet/playfield/backglass can be in any condition but game must be electromechanically complete (or very close).
Contact:
The Pinball Revival Company
voice: 415 883 4180
372 Bel Marin Keys Blvd Ste D2
Novato, CA 94949
Posted: 25 January 2009
Looking for parts for the following:
Gottlieb:
Raven Translite
Williams:
Firepower II Speaker Panel
Firepower II Playfield overlay or NOS Playfield
Data East:
Left side plastics for Lethal Weapon 3
Speaker Panel for Lethal Weapon 3
Contact:
Shawn Stevens
PA
Posted: 25 January 2009
Parts wanted:
Back doors for Williams 1974 Super Flite, Bally 1973 Odds & Evens, and Gottlieb 1973 Duotron
Gottlieb 1969 Aquarius EM coin door
Gottlieb 1957 Ace High coin door hardware
Gottlieb 1975 Spirit of '76 plastics: A-15870 and A-15869-L only
Can pickup back doors or coin door if located in southern New England.
Contact:
Paul Patti
8 Valiant Ln.
Nashua, NH 03064
Posted: 24 January 2009
Looking for several parts (backglass, plastics, etc.) for a 1971 Gottlieb Play Ball
Contact:
Darren Berg
Posted: 24 January 2009
1940 Exhibit Supply Company Flagship ball lifter knob or from other machine made from that company during that time. Also looking for manuals, schematics, & pics of playfield. I have a 90% complete machine I want to restore it. Any info would be greatly appreciated.
Contact:
Paul Wheeler
voice: 928-925-0740
Po Box 12704
Prescott, AZ 86304-2704
Posted: 23 January 2009
1961 Midway Deluxe Shooting Gallery legs and coin door needed. Pats from similar gun games like Midway Shooting Gallery, Bally Sharpshooter, Bally Marksman should also work.
Contact:
Ron Ohlman
Posted: 23 January 2009
Sega Motochamp Parts
Searching for the following parts for a 1973 Sega Motochamp EM arcade game.
Small amplifier board on the original 8 track player.
Part Number (GN-4604) Also fits Sega Grand National.
Complete Drum/Projector unit which projects road lines onto the playfield. Part Number(MT-1100)
Also interested in any sound/amplifer cards from other Sega EM games.
Contact:
Derek
Posted: 23 January 2009
Looking for standup targets (square not round) and any switchs for Gottlieb's Street Fighter 2
Contact:
Rob
4124-135 Ave.
Edmonton, Ab Canada
Posted: 22 January 2009
Wanted Gottlieb MA-1722 Aux. Driver Board. This is the very small (approx. 2 1/2" x 3 1/2") in size. Usually located on the back of the lamp board in the head of the machine.
Contact:
Rick Pittman
Willow Hill, PA 17271
Posted: 22 January 2009
Bally Silverball Mania playfield or a overlay.
Contact:
Frank
Burlington, NC 27217
Posted: 21 January 2009
I need a gun sight with or without the allen screw for a Chicago Coin Big Top Twin rifle game from 1972.
Contact:
Scott
Rochester Hills, MI
Posted: 21 January 2009
1961 Williams Highways machine legs - the tapered sort. Please contact with price etc.
Contact:
John Baylis
UK
Posted: 20 January 2009
I am looking for 1994 Data East orginal pistol shooter (ball shooter) in new to excellant condition. I am also looking for the original cabinet topper for the game. If you have one or both items avalible for sale please email pictures along with prices.
Regarding payment: I can only consider seller that I can pay using a paypal account. They provide buyer protection and seller receives his money immediatly.
Contact:
Beth Ann Otoole
Warrington, PA 18976
Posted: 19 January 2009
1970 Gottlieb Scuba plastics or just the upper right one. I'm looking to restore this game I bought from Tom Taylor about 15 years ago. Any leads would help.
Contact:
Pete Cooley
fax: (714) 326-8405
Orange County, CA.
Posted: 18 January 2009
1975 Playmatic Speakeasy, Need the 2 flat plastic pieces at the top of the machine (one on the left and one on the right, they meet in the middle) that include holes for the mounting screws for the ball channel flapper that stops the ball from rolling back down the delivery shute and on the left side includes the screw holes for the round rubber cushion that absorbs the initial force of the ball when it first comes out of the shute. The existing plastics deformed from the lamp bulb heat. If you have any sugestions for what material I can use if I make my own, I would appreciate the help. I am afraid regular plastic may melt.
Contact:
Jack
voice: 440-328-6971
Parma, Ohio
Posted: 18 January 2009
Demolition Man Right Ramp
Demolition Man Translite
Contact:
Patrick
Mckinney, TX 75071
Posted: 18 January 2009
Looking for a Gorgar backglass I live in New Jersey would prefer to pick up.
Contact:
James Crawford
voice: 856 4640040, fax: 856 4640040
1 Lavenham CT.
Mantua, NJ United States
Posted: 18 January 2009
WTB: Funhouse Diamond Plate playfield
(FH DP PF)
Must be excellent condition used or NOS. At this point I'm not looking for clearcoated or IPBs. If you can box it, I can have it picked up by FedEx. Please email me with details.
Contact:
Luther
Chicago, IL
Posted: 17 January 2009
1970 Bally Bowl-O backglass, new or excellent condition wanted. I have a backglass if you are a restoration service. Please email with what you have and a price.
Contact:
John Zynda
5906 Channel CT
Greensboro, NC 27410
Posted: 16 January 2009
1940's-1950's Scientific Baseball Game Player Figurines. I remember getting an email about 5 years ago of someone who finally molded replacement/reproduction 3-D baseball players for these classic Pitch-N-Bat games.
Contact:
"Dr. Scott" Sheridan
voice: 419-897-4263
1374 Conant St.
Maumee, OH 43537
Posted: 15 January 2009
1992 Gottlieb Cue Ball Wizard - Looking for a light dome cover for the left side of the upper playfield (mounts on ramp). These are the small pool balls labeled 1-7. Must be in good condition with no damage to the balls. Please let me know if you might be able to help complete my game.
Contact:
Gregg Bizier
Posted: 15 January 2009
Champion Pub NOS backglass. $200.
Contact:
B Mccullough
Cincinnati, OH
Posted: 15 January 2009
Looking for a 1975 Williams Toledo Bonus Unit Mechanism as well as a backglass for reasonable. Please email a pic.
Contact:
Gary Bokamp
Posted: 15 January 2009
Wanted: Good to mint backglass for 1976 Gotllieb Surfer, the 2 player not Surf Champ.
Contact:
Corey
Picayune, MS 39466
Posted: 15 January 2009
Looking for a 1975 Williams Toledo Bonus Unit Mechanism. Please email a pic.
Contact:
Gary Bokamp
voice: 815-962-0935
4703 Jade Parkway
Rockford, IL 61102
Posted: 15 January 2009
Wanted - 1960 Gottlieb "Light a Card" 2 player backglass-very good condition.
Contact:
Jim Oswald
voice: 801 556-8197
252 N 400 E
Centerville, Utah 84014
Posted: 14 January 2009
I am after a Bally Rolling Stone playfield, it could be bare or fully populated, I am after a replacement for the worn one I allready have, I am after a playfield with minimal or no ware at all, willing to pay well.
Contact:
Tony Tanti
High Street
Melbourne, Victoria 3076
Posted: 13 January 2009
I am looking for partial or full plastic sets for a Data East Jurassic Park. Also looking for other various parts if you are parting one out. Please let me know what you have.
Contact:
Bryan
Posted: 13 January 2009
Need schematic for Bally Eight Ball machine.
Contact:
James Smith
voice: 928 376 0969
1228 S. 40th Dr.
Yuma, AZ 85364
Posted: 13 January 2009
1950 United Skee Alley Backglass.
Contact:
Alex Fuchs
Edgerton, WI 53534
Posted: 12 January 2009
Have the following machines im parting out. Space Invaders, Sharpshooter, Solids N Stripes, Gulfstream, Freedom (EM), Supersonic, Vector, Lazerball, Hot Doggin, and Bow n Arrow. Just ask for what ever parts you need and we can deal on price.
Contact:
Joe
voice: 940-867-0875
TX
Posted: 11 January 2009
1960 Bally Space Flight EM arcade - looking for a new motor, part number is E-119-398B, my motor is toast and blows the fuse. Will pay your price for the original part in working condition. This motor is the one used to move the module left and right.
Contact:
Rick
Posted: 10 January 2009
I am in need of some parts for a 1990 Williams Diner, as follows:
1) Cash register assy
2) Left clear ramp (long one that dumps ball back into left inlane)
3) Wireform right ramp (one that dumps ball back into right inlane)
I have a decent, restorable game that is missing these parts, used or NOS acceptable. Please let me know what you have.
Contact:
Chris Munson
Richardson, TX
Posted: 10 January 2009
Wanted Backglasses: 1967 Bally Surfer's, 1969 Williams Paddock, 1972 Williams Honey, 1970 Bally 4 Queens, and 1973 Bally Rogo, I'am looking for nice backglasses, near mint, but will consider nice, with a little flaking, plz email me with good pictures. Will not buy backglasses from overseas, just America.
Contact:
Eric Spangler
1004 Royer Road
New Bloomfield, PA 17068-usa
Posted: 10 January 2009
Looking for a Williams Blackout Backglass in decent shape.
Contact:
Gary
voice: 865-856-5066
Knoxville, TN
Posted: 9 January 2009
williams jokerz upper playfield mine has cracked and yellowed looking for clear one to match ramps.
Contact:
David Wolper
voice: 631 223 6325
2 Kara Court
Centereach, New York 11720
Posted: 9 January 2009
1973 Gottlieb Pro Pool Backglass wanted, excellent to mint.
Contact:
Mike Boerschinger
Waukesha,, WI
Posted: 8 January 2009
Backglass wanted for 1964 Williams Soccer. Mine is OK but would like one better. Also, need some playfield plastics for same game. I'm an old time pin collector and am not getting any younger.
Contact:
David Metsch
voice: 303 660 1981, fax: 720 733 2084
387 Suffolk Ln.
Castle Rock, CO 80108
Posted: 8 January 2009
I am looking for a good looking backglass for a 1977 Stern Pinball.
Contact:
Joseph
Marietta, GA 30062
Posted: 8 January 2009
Wanted all years. Empty cabinets and back boxes Trashed or Thrashed any condition. If you are going to throw it out let me know. I need it! I will be making reproduction Cabinets Under license from Gottlieb (Still working on license agreement) I need old beatup trashed cabinets for dimentional reasons and research and development. Please let me know if you have a system that is hard to find or you are willing to allow me to take some pictures/scans of to start building our graphic stencil inventory.
Contact:
Keith Jenkins
Boca Raton, Florida 33428
Posted: 7 January 2009
1957 Genco Showboat Schematics wanted
Contact:
Adam Smereczniak
Posted: 6 January 2009
I'm looking for parts for a 1979 Williams GORGAR pinball machine.
The Backglass and playfield specificly but if you have other parts I'd definately like to hear what you have.
Contact:
Eric Bousquet
388 Elm St.
East Longmeadow, MA 01028
Posted: 6 January 2009
Wanted: Miss world backglass any condition considered. Will pay $50-$350 depending on condition.
Contact:
Neo
voice: 414-303-4704
Burlington, WI
Posted: 6 January 2009
Looking for a Centaur II Backglass.
Contact:
Doug Tipple
voice: 480-226-6497
11221 South 51st Street # 3026
Phoenix, AZ 85044
Posted: 5 January 2009
Searching for Mary Shelley's Frankenstein full playfield plastics set.
Contact:
Craig
Posted: 5 January 2009
Wanted, 'Rodney' the crocodile/alligator play field plastic character from 1991 Gottlieb Surf'n Safari. No luck at PBR and the usual resources. Found one in Kansas but I am NOT paying $150 for him.
Contact:
Ron Zabarsky
Strongsville, Ohio 44136
Posted: 4 January 2009
WTB: 1980 Stern ALI backglass. >Need a really nice one.
Contact:
Dan
NC
Posted: 4 January 2009
I'm searching for a System 11c CPU board for my Dr. Dude.
Contact:
Enzo Pasciuti
Posted: 3 January 2009
Wanted: Strikes and Spares Playfield, preferrably NOS.
Contact:
Michael Thomas
voice: 2703002394
Vine Grove, KY 40175
Posted: 2 January 2009
1980 Williams Scorpion backglass.
Contact:
Joel Faermark
voice: 847-401-1381
454 W Touhy Ave #499
Des Plaines, IL 60018
Posted: 1 January 2009
Looking for a Williams Toledo back glass in decent shape.
Contact:
Gary Bokamp
4703 Jade Parkway
Rockford, Ilinois 61102
Posted: 31 December 2008
I need 2 Gottlieb System 3 driver boards MA-1358 & a Gottlieb System 3 CPU board MA-1934. Boards can be in any condition, so non-working or unknown condition ok.
Contact:
Rick Pittman
Posted: 30 December 2008
Looking for a 1969 Gottlieb Target Pool backglass. Prefer a Ron & Nancy Webb repro glass. If you have a used glass available or know of someone who may have one available, please let me know. I have several friends in the USA, whom you could ship to if you don't want to deal with international shipping.
Contact:
Stuart Caines
Australia
Posted: 30 December 2008
Looking for a NOS or real nice 1969 Gottlieb Target Pool playfield. If you have a playfield available or know of someone who may have one available, please let me know. I have several friends in the USA, whom you could ship to if you don't want to deal with international shipping.
Contact:
Stuart Caines
Australia
Posted: 30 December 2008
I need the animation unit plastic on a Gottlieb Miss Annabelle. Mine is there but it is pretty faded and warped. Could also use a better animation fan disc for the same game if the price is right.
Does anybody know if these parts were reproduced?
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 29 December 2008
Gottlieb multi player woodrail - just need one timber rail. Has to be a multi player rail as they are wider than the single player.
Contact:
Tony Mather
Posted: 28 December 2008
Parts for 1978 Williams Pompeii Shuffle Bolwing game. All boards/parts.
The games starts up but shows both LEDs, so there is some problem with the CPU and Driver Boards.
Contact:
Scott Hotham
Doylestown, PA 18901
Posted: 26 December 2008
1990 Bally The Game Show. Need a populated playfield, no ramps or plastics needed. 7+ or better.
Contact:
J.mason
Ohio
Posted: 25 December 2008
I am looking for a backglass or scan of the backglass for a Phantom Of the Opera. If you have one for sale please contact me with condition and price.
Contact:
Brian
VA
Posted: 25 December 2008
I'm looking for the plastic cover for the score and credit displays on a Gottlieb Monte Carlos. I could also use a new ternslight as mine is sun faded.
Contact:
Mark Hooks
voice: 850-894-8103
2357 Hampshire Way
Tallahassee, FL 32309
Posted: 25 December 2008
Wanted topper for Whitewater, not worried about the dome but all other parts
Contact:
Benny Benstead
Posted: 25 December 2008
1959 D. Gottlieb & Co. Head of the game or just the plastic spinning disk that says lightning ball with the toy solders on it. I will buy the entire head if necessary just to get the plastic disk. Trying to complete a restoration project.
Contact:
David F. Silverman
voice: (240) 372-3333, fax: (301) 384-2779
614 Cannon Road
Silver Spring, Maryland 20904
Posted: 24 December 2008
Ultrapin: Preferably with the most recent updates from Global VR.
Contact:
Joe
Royal Oak, Michigan
Posted: 24 December 2008
1957 Williams Star Colors Schematic, Backglass Photos
I have a Colors schematic, but it does not show the match numbers or star lights and I am wondering if there may have been 2 different versions of this game with different schematics. I noticed that the 1960 Parts Catalog referred to the game as Star Colors rather than Colors, though my backglass just says Colors, unlike the other Star games.
I could also use some photos of the backglass, especially the back of the glass. The section with the stars is completely flaked off on mine and I would like to know what they look like so I can recreate them.
Contact:
Steve Yates
voice: 216-554-1175
Cleveland, OH 44130
Posted: 22 December 2008
Medieval Madness speaker panel wanted, must be in mint condition.
Contact:
Tony Stark
voice: 61 403 26 33 06, fax: 617 3219 9965
Brisbane, Qld Australia
Posted: 22 December 2008
United Handicap shuffle alley backglass wanted. Believe it is a 1956.
Contact:
Mike Cwalina
voice: 724-942-1492
405 Timberlake Dr
Venetia, PA 15367
Posted: 22 December 2008
Looking for a nice backglass for a 1975 Williams triple Strike.
Contact:
Darryl Anderson
Brooklyn Park, MN
Posted: 21 December 2008
Looking for Rockola Pinball Legs for Jigsaw and I need a sound stage score reel (complete assembly).
Contact:
Alex
New York
Posted: 21 December 2008
Wanted: Working SB-100 Stern sound board.
Contact:
Ken
voice: 260-490-7673
Fort Wayne, In
Posted: 21 December 2008
Looking for old backglasses. Doesn't need to be in perfect shape.
Contact:
Chris Keene
Chattanooga, TN
Posted: 20 December 2008
Wanted: 1992 Getaway High Speed 2, Complete Supercharger Entry Ramp Sign, bracket, lights, wiring, etc. I will ONLY buy from UNITED STATES sellers. If out of COUNTRY, DO NOT BOTHER ME.
Contact:
Kirk Drotar
P.O. Box 2002
Arvada, CO 80001
Posted: 20 December 2008
We need the bell that sits on top of the 1987 Williams Fire pinball machine.
Contact:
Kathy
Posted: 20 December 2008
In need of flipper solenoids for a Williams 1980 Firepower. Primarily in search of new or used if need be. Please email if you have a lead, will only give out address in case of shipping arrangements.
Contact:
Brian Thomas
Vancouver WA
Posted: 20 December 2008
Need a Tweety's Slide Ramp from Bugs Bunny Birthday Bash. Used and imperfect condition is OK (within reason). Picture appreciated - trying to restore my ramp or make a replacement as no new ones available at this time.
I have lots of NOS or used parts - perhaps a trade?
John :-#)#
John's Jukes Ltd.
Contact:
John Robertson
voice: 604-872-5757
2343 Main St.
Vancouver, Bc V5t 3c9, Canada
Posted: 19 December 2008
Wanted:
Seawitch Apron
I cleaned mine so well that I took the graphics and text right off. I could really use a new one. Please e-mail me if you have one!
Contact:
Bryon Triplett
Posted: 19 December 2008
Looking for parts for a 1954 Gottlieb Jockey Club Machine
Mine partially works but not properly.
Contact:
Mark Ireland
Rr 1
Wilsonville, Ontario N0e 1z0
Posted: 18 December 2008
Looking for the following parts:
Any Flight 2000 playfield plastics
Gottlieb Sunshine backglass and parts.
Contact:
Stewart Virgona
Sydney, NSW Australia
Posted: 18 December 2008
I'm looking for a Gottlieb motor board transformer for a 1969 Spin A Card
Contact:
Mike
Posted: 17 December 2008
Looking for any Stern Flight 2000 playfield plastics. Any help appreciated.
Contact:
Stewart Virgona
Posted: 17 December 2008
Looking for any and all parts for Joust cocktail pinball by Williams (1983, but specifically PF plastics and aprons.)
Looking for any and all parts for Defender pinball by Williams (1982, but specifically the PF, PF plastics, single drop targets and 2 metal PF support hoops.)
Also looking for a Bad Cats PF, backglass and plastics.
Also looking for the main ramp for Doctor Who.
Contact:
Kris Bliznick
Tucson, Arizona
Posted: 16 December 2008
Looking for Overlays for both Bally Playboy and Silverball Mania would also consider original playfields with minimal wear.
Contact:
Cory
Posted: 16 December 2008
Wanted: Old non working/ working playfields. The cooler the better. Any condition. Elvis, Evel Knievel, band themes, sport themes, superheros, all a plus.
Contact:
Chris Keene
Chattannooga, TN USA
Posted: 16 December 2008
1964 - 1966 Gottlieb upper arch. Also, need apron for 1965 Gottlieb Cowpoke. 1964 Gottlieb Majorettes apron would work also.
Contact:
David Hoover
Trivoli, Illinois
Posted: 13 December 2008
High Speed. I'm looking for a new or nice used ramp ans jet bumper caps. If you have any other High Speed parts, I may be interested in those as well.
Contact:
Paul Olson
Reno, NV 89506
Posted: 13 December 2008
Want Odd Ball plastic bumper caps for woodrail pinballs.
Contact:
Jack
Loveland, Ohio 45140
Posted: 13 December 2008
1984 Bally Spy Hunter playfield plastics - must be in good condition. Specifically want the left top corner piece.
Contact:
Jeff Winters
voice: 507-536-0241
1330 19th Ave SW
Rochester, MN 55905
Posted: 12 December 2008
Universe by Zaccaria - 'Coin Unit' stepper.
I recently acquired this pin and am in the process of restoring it. I noticed the wiper fingers are missing from the 'Coin Unit' stepper. I am hoping to replace the whole unit, or just the fingers, or even a photo of the unit in the rest position so I can make my own wiper fingers. If anyone is parting this machine out, please contact me.
Contact:
Aaron McCall
voice: 519-808-6815
134 Queen Street
Komoka, Ontario N0L 1R0 Canada
Posted: 12 December 2008
Parts for Bally Galaxy Ranger 1978 ( Boards )
Contact:
Robert
Posted: 11 December 2008
Williams playfield score reels or reel decals (Wagons, Lanterns, Pans etc.) NOS or used if good quality.
Contact:
Mitch Paulsen
voice: (516) 270-2867
Posted: 11 December 2008
Looking for decent but inexpensive Gottlieb Joker Poker backglass as well as drop targets for the machine.
Contact:
Kerry Hudson
Posted: 10 December 2008
Looking for the flipper cover for a Williams EM Little Chief.
Contact:
Jim Kruger
Sleepy Hollow, IL USA
Posted: 10 December 2008
Wanted: 5 stack switch for anti cheat for a 6 Card Bally Bingo.
Contact:
Robert Honchark
voice: 860-2256537
Hartford Conn.
Posted: 10 December 2008
All parts for a Williams Joust pinball.
Contact:
Paul Brown
voice: 314-406-2000
17608 Gardenview Manor Circle
Glencoe, M0 63038
Posted: 9 December 2008
Looking for an apron for Strange Science Pin. In good condition
Contact:
Joe Hankins
Posted: 9 December 2008
1981 Bally Embryon: Looking for a playfield in nice shape.
Contact:
Pinballfan81
Posted: 8 December 2008
Wanted:1969 Bally: COSMOS, Backglass in nice condition, if any exist.
I will ONLY buy from UNITED STATES sellers!!, Out of Country, DO NOT BOTHER ME.
Contact:
Kirk Drotar
P.o. Box 2002
Arvada, CO. 80001
Posted: 7 December 2008
I am looking for a backglass for a Nugent pinball or an old Nugent machine that can be parted out.
Contact:
Jerry
Asheville, NC 28806
Posted: 6 December 2008
1958 Bally All Star Deluxe Bowler cycle motor assembly wanted!!
This is part E-119-142, the unit that moves the ball shooter back and forth. Mine burned out badly due to a stuck mechanism and is unusable.
Will pay good money for a working one. Please email me if you have it.
Contact:
Rick
Posted: 5 December 2008
Gottlieb, Cleopatra
Need SS backglass for machine.
Looking for a nice one.
Contact:
Scott Pullen
fax: 207 283-0224
Saco, Me United States
Posted: 5 December 2008
KISS plastics wanted, also, coin box for same machine
Contact:
Kerry Hudson
Posted: 5 December 2008
Looking for a Data East Star Trek playfield in good condition. No parts needed but won't mind if has.
Need to send to Spain.
Contact:
Angel
Spain
Posted: 5 December 2008
Wanted: Big Indian / Big Brave Playfield, very good condition
Contact:
Scott
Las Vegas, NV
Posted: 5 December 2008
Looking for a 1967 Gottlieb Hi Score Backglass. I am also looking for a 1977 Gottlieb Bronco Head with out Backglass.
I also have backglass for sale or trade for other backglass.
Contact:
Rick
voice: 951-203-7307
2679 Quail Knoll
Lake Elsinore, CA 92530
Posted: 4 December 2008
Wanted: 1948 Gottlieb Buccaneer Backglass in decent shape, can be repro.
Contact:
Andrew Sneed
Posted: 4 December 2008
1964 Texas Ranger Gatling Gun: 2 plastics that are inside showing targets. Mine have deteriorated. Also need any Mutoscope (American) Parts Including Case, Doors, Stands Etc. I left 3 of them at the powdercoaters 10 yrs ago and never reclaimed them.( Pretty stupid Huh? I have all the insides and Trim.
Contact:
Jim Marin C/o Viva Hollywood
voice: 702-383-8482, fax: 702-383=0627
1126 S Main Street
Las Vegas, NV 89104
Posted: 2 December 2008
1979-1980 Bally Rolling Stones playfield
VG to NOS, reasonable price please
I am restoring a game in my spare time
Contact:
Steve
Morton Grove, IL 60053
Posted: 2 December 2008
I am looking for the inner backglass for a Gottlieb Mars God Of war.
Contact:
Dan Cavalieri
voice: 402-706-1164
2201 South 57th Street
Omaha, NE 68106 USA
Posted: 1 December 2008
1968 Williams Ballpark Looking for backglass and upper playfield homerun box.
1969 Williams Paddock Looking for backglass
1970 Williams Hit and Run Looking for backglass
1947 Exhibit Crossfire Looking for backglass
1937 Stoner Richocet Looking for playfield
1949 United Shuffle Alley Set of light-up pins and metal bar with ends that sits 1/2 way down the alley.
1954 Bally Jett Bowler Backglass and metal bar with ends that sits
1/2 way down the alley
Contact:
David Baldwin
Po Box 36
Newbury, Ohio 44065
Posted: 30 November 2008
1982 Bally Centaur II backglass needed. Does not need to be perfect.
Contact:
Basil
Colorado 80537
Posted: 27 November 2008
I am looking to buy the following backglass for these machines.....1969 Williams Paddock, 1972 Williams Honey, 1980 Williams Black Knight Limited Edition, 1972 Bally Bon Voyage, 1974 Bally Sky Kings. 1953 Bally Beach Club (Bingo) Prefered in Presentable Condition Minor Flaking Expected
Contact:
Richard Davis
voice: 209 392 8720
1042 Dos Palos Avenue
Dos Palos, California 93620
Posted: 27 November 2008
Whitewater boulder that goes under the shooter ramp. Repro or original ok. Send picture of what you have.
Contact:
Robert
Posted: 24 November 2008
Gottlieb Flying Circus score and instruction cards. Originals, scans, whatever you have is appreciated.
Contact:
Joe
Posted: 23 November 2008
Looking for parts for these machines.
Captain Fantastic-Bally
The Six Million Dollar Man-Bally
Blackout-Williams
Please let me know what you have with a price included.
Contact:
Justice Colwell
139 Fralicks Beach Road
Port Perry, Ontario Canada
Posted: 23 November 2008
Bally High Hand or Royal Draw console slot machines. Paperwork and/or schematics wanted. Machines were made around 1940, poker themed.
Contact:
Jack Gordean
voice: 818 458 1928
4612 Red Rover Trail
Acton, California 93510
Posted: 22 November 2008
Looking for Sega Twister playfield plastics and ramp.
Looking for Williams Fire! playfield plastics/buildings etc.
Contact:
Mike
On K0m 1l0
Posted: 22 November 2008
This information is current as of November 21, 2009 2:52:03 MST
© Copyright Mr. Pinball 2009. All Rights Reserved.