Mr. Pinball Tip:

Ordering new rubber rings using old rings as a guide is sometimes impossible due to broken, non-elastic, or missing rings. The following chart will help you determine the correct sizes for all your rings. Measure the circumference around the posts. Find that size along the left side and note where that size intersects the red line. Follow that point down. That is the size of your new rubber ring that will fit. These numbers are the inside diameter of new rubber rings, which is how sizes are denoted. Note that small sizes smaller than 1" may be difficult to determine on the chart, but are easy once you know the rules.
For example if you have three posts for one rubber and the circumference around the three is 15.0", then you need a new 3.5" rubber ring.
Tip Archive

New tips are welcome and encouraged. Tips will be credited to those who contribute. If you would like to submit a tip click here.

For more information you may contact us by email, or by email form.
Go to: Home page, Photo Gallery, Classified Ads, Repair Tip of the Day, The Pinball Collector Register, Advertisers List, Site Map
© Copyright Mr. Pinball 2024. All Rights Reserved.