* lside-dr.m - Yehle #13 9" smoothing plane
* Left side plate, held horizontally
* Hole drilling only
* Front of part is toward left
* Part zero is: x=0 at front edge,
*  y = 1.95 is at top of side
*  (the edge away from operator)
* Z is above work: pause at each location
*  for you to mount bit and drill (/tap)
* Lever cap pivot: drill, then ream 5/16
Rapid      X 3.1204 Y 1.5004
Dwell 0.0
* Iron-centering spacers: tap 10-32
Rapid      X 3.0938 Y 0.4651
Dwell 0.0
* Handle & rear infill: 3/16 w/countersink
Rapid      X 8.5000 Y 0.4375
Dwell 0.0
Rapid      X 5.2500 Y 1.1875
Dwell 0.0
* Front bun (cushion)
Rapid      X 0.5000 Y 0.5000
Dwell 0.0
Rapid      X 1.625 Y 1.6875