* rside-cf.m - Yehle #13 9" smoothing plane
* Right side plate, held horizontally
* Cuts front chamfer on top profile only
* Front of part is toward left
* Part zero is: x=0 at front edge,
*  y = -1.95 is top of side
*  (the edge toward operator)
* Z is plunged to depth you want cut
* (run program once at each depth)
* Tool 14 is 3/8-to-3/4 chamfer mill, 45 degree
Rapid      Y -2.5 Tool# 14
* Come in on .5" tangent line to upcoming arc
Rapid      X 4.3763
Line       Y -2.3130 ToolComp Left Feed 20.0
Line       X 4.0324 Y -1.9500 Feed 3.0
Arc Ccw    X 3.4522 Y -1.8105 Radius 0.5474
Arc Cw     X 2.7143 Y -1.7185 Radius 0.8553
Arc Ccw    X 0.9579 Y -0.9807 Radius 3.4823
Line       X 0.0000 Y -0.8439
Line       Y 0.1
Line       X -0.75 Feed 20.0
Line       Y -1.5 ToolComp Off
Line       Y -2.5 Tool# 0
* Can just lower cutter and run again, unless
* something is in the way between X=0 and 4