* SOLESLOT.M --  Yehle #13 9" smoothing plane
* Slot for iron, and holes for riveting throat-plate, in sole
* Does not cut angles in slot
* Front at left, at x=0; Y=0 is centerline of sole
* Held flat, bottom up; Z=0 is flush with where tool
*  makes first contact with metal
* (Bozo note: watch out for your parallels! 1/8" max thickness)
* Slot is 2.04 wide x .2206 long (.169 iron, 50 deg, no clearance)
* Tool is 3/16" diameter centercutting end mill
Dim Abs
Rapid      Z 0.1
* Back of slot is 2.8259 from sole's front edge
* minus 3/32 for a 3/16 end mill: 2.8259-3/32=2.73215
Rapid      X 2.7322 Y 0.9263
* note: for 1/4" end mill: Rapid      X 2.7009 Y 0.895
Line       Z 0.05 Feed 5
*
Line       Z -0.02 Feed 1
Line       Y -0.9263
Line       X 2.6990
Line       Z -0.04
Line       Y 0.9263
Line       X 2.7322
*
Line       Z -0.08
Line       Y -0.9263
Line       X 2.6990
Line       Z -0.10
Line       Y 0.9263
Line       X 2.7322
*
Line       Z -0.12
Line       Y -0.9263
Line       X 2.6990
Line       Z -0.14
Line       Y 0.9263
Line       X 2.7322
*
Line       Z -0.16
Line       Y -0.9263
Line       X 2.6990
Line       Z -0.18
Line       Y 0.9263
Line       X 2.7322
*
Line       Z -0.20
Line       Y -0.9263
Line       X 2.6990
Line       Y 0.9263
*
Rapid      Z 0.1
* Drill three 3/16 holes in sole
* for riveting 3/8" thick iron-backup plate
*Rapid      X 3.5 Y 0.625 Tool #3
*Dwell 0.0
*Rapid      X 3.5 Y -0.625
*Dwell 0.0
*Rapid      X 4 Y 0
*Dwell 0.0
*Rapid      Z 0.1 Tool# 0