Eliminator
The first pic is taken off a website, and is an attempt to eliminate. I
did a little better, by leaving little tabs for the plates to fasten to
the plate. When you cut, leave the tabs on the fender as shown by the
yellow lines. The second is of the bike with the plate off. looking
pretty good. The tailight sockets can be pried out of the old tailights
as they need to be moved into the holes already there for them in the
brake light setup, but you can buy new sockets at an autoparts store for
a couple bucks, and save the lights and some effort.
John Cadwell
BACK
roachie@xmission.com